2024-2026 Cupra Terramar SUV Miscellaneous situations -> Towing the vehicle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Miscellaneous situations -> Towing the vehicle for Your Cupra Terramar SUV First Generation (2024-2026)

342
Miscellaneous situations
●
Observe the usage instructions of the jump
lead manufacturer.
●
On the other vehicle, do not connect the
negative cable directly to the negative ter-
minal of the discharged battery. Any sparks
could ignite the igniter gas coming out of the
battery and could cause an explosion.
●
The negative wire must never be connec-
ted to fuel system components or brake lines
on the other vehicle.
●
Do not touch uninsulated parts of the pole
clamps. The jump lead attached to the posi-
tive battery terminal must not touch metal
parts of the vehicle, this can cause a short
circuit.
●
Jump leads must be placed in such a way
that they cannot be caught by rotating parts
in the engine compartment.
●
Do not rest your body on the batteries, as
this could cause burns.
●
Take into account the instruction manual
of the jump lead manufacturer and the in-
struction manual of the other vehicle.
NOTICE
Immediately go to a specialist workshop and
have the 12volt battery checked.
Towing the vehicle
Introduction
It takes practice to tow a vehicle, especially
when using a tow cable. Both drivers should be
well informed of the special features of towing.
Inexperienced drivers should refrain from tow-
ing.
During towing, make sure at all times that no
inadmissible pulling forces or jolts are caused.
On roads without a rm surface there is always
the danger of overloading the attachment
parts.
Take into account the legal provisions regard-
ing tow starting and towing.
Tow start
Tow starting means starting a vehicle's engine
while another puts it in motion by pulling it.
Due to technical reasons, tow starting the ve-
hicle is not allowed if it has an automatic gear-
box.
Towing
Towing means a vehicle pulling another vehicle
that is not in a condition to drive.
The vehicle can be towed with a tow bar or
cable.
●
The speed limit is 50km/h (30 mph).
●
The maximum permitted distance is 50km
(30 miles).
Tow cable and tow bar
It is safer for the vehicle to be towed using a
tow bar, avoiding damage to the vehicle. The
tow cable should only be used if a tow bar is
not available.
A tow rope should be slightly elastic to avoid
damage to both vehicles. It is advisable to use
a tow rope made of synthetic bre or similarly
elastic material.
Towing with a tow truck
If a tow truck is used:
Fig.211 Transport with a tow truck: front-
wheel drive vehicles.
Miscellaneous situations
343
Towing the vehicle
Fig.212 Transport with a tow truck: all-
wheel drive vehicles (4Drive)
Towing vehicles with four-wheel drive
(4Drive)
Four-wheel drive vehicles (4Drive) can be
towed using a tow bar or tow rope. It is not per-
mitted to suspend the front or rear axle while
towing. This could damage the transmission.
Deactivate roll-away protection (vehicles
with automatic transmission) ›››
page226
If necessary, to release the parking brake so
that the vehicle can be pushed or towed:
●
Keep the brake pedal pressed down and se-
lect the N position on the gear selector. Next,
conrm Deactivate roll-away protection in
the Infotainment System.
●
OR: open the vehicle settings in the infotain-
ment system > Vehicle > Brakes > Deacti-
vate the “Roll-away protection function”.
WARNING
When towing a vehicle, the driving behaviour
and braking capacity change considerably.
WARNING
Never allow the vehicle to be towed if it has
no power.
●
When towing, never remove the key from
the ignition or disconnect the ignition with
the ignition and start button. Otherwise, the
electronic lock of the steering column could
suddenly get blocked and it would be impos-
sible to steer the vehicle. This could cause an
accident, serious injury and loss of control of
the vehicle.
●
If the vehicle runs out of power during tow-
ing, stop the process immediately and seek
the assistance of specialised personnel.
NOTICE
Towing the vehicle with a tow cable or a tow
bar can cause damage to the vehicle.
●
If the vehicle is towed with a tow cable or
tow bar, special care must be taken.
●
If possible, have the vehicle transported on
a tow truck.
NOTICE
If the vehicle is pushed by hand, the tail light
units, the side spoilers of the rear window
and large sheet metal surfaces may be dam-
aged. In addition, the rear spoiler could be
detached.
●
If the vehicle is pushed by hand, the tail
light units, the side spoilers of the rear win-
dow, large sheet metal surfaces or the rear
spoiler.
NOTICE
Removing and attaching the cover and the
towing eye may cause damage to the vehicle,
for example, on the paintwork.
●
To avoid damaging the vehicle, remove and
replace the cover and the towing eye care-
fully.
NOTICE
Using a towing eye that is not suitable for the
vehicle can damage it.
●
When towing, always use the vehicle’s tow-
ing eye, which forms part of the on-board
tools, or an appropriate eye for towing.
344
Miscellaneous situations
Instructions for tow-starting and
towing
During towing, the change of direction can be
signalled on the towed vehicle even when the
hazard warning lights are on. To do so, at the
same time, the turn signal lever must be oper-
ated with ignition switched on. During this time
the hazard warning lights remain disconnec-
ted. When the turn signal lever is returned to
the neutral position, the hazard warning lights
will be automatically reactivated.
Cases where tow starting and towing the ve-
hicle are not permitted
Do not allow the vehicle to be towed in the
following situations:
●
The vehicle’s gearbox is damaged or has no
lubricant.
●
The 12-volt battery is discharged. In vehicles
with the “Keyless Access” locking and ignition
system the steering remains locked and the
parking brake cannot be deactivated and the
steering column lock cannot be released if
they are connected.
●
If a distance above 50 km needs to be travel-
led.
●
There is no guarantee that the wheels will
turn smoothly or that the steering will work af-
ter an accident.
If the vehicle cannot be towed on its wheels for
any of the reasons mentioned above, request
assistance from specialised personnel and, if
necessary, have the vehicle transported with-
out the wheels touching the ground.
Tow start
Steps to be taken prior to tow starting
Vehicles with an automatic gearbox: Due to
technical reasons, tow starting the vehicle is
not allowed. Attempt to start the engine using
the starting aid ›››
page340.
NOTICE
When tow-starting, unburnt fuel could enter
the catalytic converter and damage it.
Towing
Preliminary steps
●
Secure the tow cable or tow bar using only
the attachment points provided for this pur-
pose ››› . Depending on the equipment,
these points may be a towing device or a tow-
ing eye.
●
Make sure the tow cable is not twisted. Oth-
erwise the towing eye could unscrew during
towing.
●
Switch on the ignition and the hazard warn-
ing lights of both vehicles. If necessary, take
into account other dierent provisions that
may exist in this regard.
●
Take into account the instructions on towing
provided in the instruction manual of the other
vehicle.
Towing vehicle (lead)
●
Do not actually start driving until the cable is
tight.
●
Accelerate with particular care.
●
Avoid sharp braking and sudden manoeu-
vres.
Vehicles with a manual gearbox:
●
When starting to drive, use the clutch very
gently.
Towed vehicle (following)
●
Make sure the ignition is switched on so that
the steering wheel does not lock and so that, if
necessary, you can use the turn signals and the
windscreen wiper.
●
The brake servo and power steering only
work when the engine is running. Otherwise,
you will have to depress the brake pedal con-
siderably harder and more force will be needed
to turn the steering wheel.
●
Release the electronic parking brake
›››page226, Using the electronic parking
brake.
Miscellaneous situations
345
Towing the vehicle
●
Make sure the tow cable is always taut.
●
Disengage the gear or place the gear selec-
tor in the N position.
WARNING
Never attach the tow rope or tow bar to axle
or running gear components. They could be
damaged, resulting in an accident and seri-
ous injury.
●
Seek specialist assistance and, if applica-
ble, have the vehicle transported on a tow
truck.
NOTICE
The vehicle can only be towed if the state of
charge of the 12-volt battery is suicient to
disengage the electronic parking brake and
the steering column lock. If the vehicle has
no power supply or there is an electric sys-
tem fault, the engine must be jump-started
to release the electronic parking brake and
deactivate the electronic lock of the steering
column.
Front towing eye
Fig.213 Front bumper on right: remove the
lid.
Fig.214 Right side of the front bumper:
towing eye screwed in.
The housing of the removable towing eye is on
the right side of the front bumper underneath
a cover ›››
Fig.213.
The towing eye should always be kept in the
vehicle.
Bear in mind the instructions for towing
›››
page344.
Fitting the towing eye
●
Remove the towing eye from the vehicle tool
kit in the luggage compartment ›››page338.
●
Remove the cover by pressing down on its
base and leave it hanging from the vehicle
›››Fig.213.
●
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››Fig.214 , ››› . Use a suitable object
that can completely and securely tighten the
towing eye in its housing.
●
After towing, unscrew the towing eye clock-
wise with a suitable object.
●
Replace the cover and push it in until it clicks
into place.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
The towing eye must always be completely
and rmly tightened. Otherwise, it could
jump out of the housing during towing.

Related Topics

Popular Owner Manuals