TOOLS
4
2
3
1
A
5
3
5
4
Accessing the tools
Jack 4
Wheelbrace 5
To use the jack, undo nut 2. When refit-
ting, fold the jack before placing it in its
housing.
This is used to tighten/loosen the wheel
bolts and, depending on the vehicle, to
access the emergency spare wheel.
The tools are located in the luggage
compartment. The presence of the vari-
ous tools depends on the vehicle.
Tighten the nut to secure the jack.
Unclip the flap A by placing your hand
in the handle 1. Remove the flap.
Hubcap tool 3
This tool is used to remove the wheel
trims.
After the using the tools, make sure you
close the flap A. properly.
Do not leave the tools unsecured inside the vehicle as they may come
loose under braking. After use, make sure the tools are correctly posi-
tioned in their housings: risk of injury.
If wheel bolts are supplied in the tool kit, only use these bolts for the
emergency spare wheel: refer to the label affixed to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances
should it be used for carrying out repairs underneath the vehicle or to gain access
to the underside of the vehicle.
5.2
English 
