2017-2023 Dacia Duster SUV Practical advice -> Tyre inflation kit User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Practical advice -> Tyre inflation kit for Your Dacia Duster SUV Second Generation (2017-2023)

TYRE INFLATION KIT (1/4)  
B
Do not attempt to use the  
inflation kit if the tyre has  
been damaged as a result  
of driving with a puncture.  
The kit is only approved  
for inflating the tyres of the  
vehicle initially fitted with the  
kit. It must never be used to  
inflate the tyres of another vehicle,  
or any other inflatable object (rubber  
ring, rubber boat, etc.).  
You should therefore carefully check  
the condition of the tyre sidewalls  
before any operation.  
A
Avoid spillage on skin when han-  
dling the repair liquid bottle. If dro-  
plets do leak out, rinse them off with  
plenty of water.  
Driving with underinflated, flat or  
punctured tyres can be dangerous  
and may make the tyre impossible  
to repair.  
Keep the repair kit away from chil-  
dren.  
This repair is temporary  
A tyre which has been punctured  
should always be inspected (and re-  
paired, where possible) as soon as  
possible by a specialist.  
Do not dispose of the empty bottle  
in the countryside. Return it to your  
approved dealer or to a recycling or-  
ganisation.  
The kit repairs tyres when  
tread A has been da-  
maged by objects smaller  
than 4 mm. It cannot repair  
all types of puncture, such as cuts  
larger than 4 mm, or cuts in tyre si-  
dewall B.  
When replacing a tyre repaired  
using this kit, you must inform the  
specialist. When driving, vibration  
may be felt due to the presence of  
the repair product injected into the  
tyre.  
The bottle has a limited service  
life which is indicated on its label.  
Check the expiry date.  
Contact an approved dealer to re-  
place the inflation tube and repair  
product bottle.  
Ensure also that the wheel rim is in  
good condition.  
Do not pull out the foreign body cau-  
sing the puncture if it is still in the  
tyre.  
5.5  
TYRE INFLATION KIT (2/4)  
1
8
2
3
C
C
7
6
5
D
4
In the event of a puncture, use the kit C  
located in the luggage compartment on  
4x2 versions or in the emergency spare  
wheel tray under the luggage compart-  
ment carpet on 4x4 versions.  
On 4x2 versions, unclip flap D.  
If the vehicle is parked on  
the hard shoulder, you must  
warn other road users of  
your vehicle’s presence  
with a warning triangle or with other  
devices as per the legislation ap-  
plying to the country you are in.  
Before using this kit, park the vehicle at a sufficient distance from traffic,  
switch on the hazard warning lights, apply the handbrake, ask all passen-  
gers to leave the vehicle and keep them away from traffic.  
5.6  
TYRE INFLATION KIT (3/4)  
With the engine running and the par-  
king brake applied,  
Note: while the container is emp-  
tying (approximately 30 seconds),  
the pressure gauge 5 will briefly in-  
dicate a pressure of up to 6 bar. The  
pressure will then drop.  
Nothing should be placed  
around the driver’s feet  
as such objects may slide  
under the pedals during  
sudden braking manoeuvres and  
obstruct their use.  
– unroll the hose from the container;  
– connect the compressor hose 3 to  
the container’s inlet 8;  
– adjust the pressure: to increase  
it, continue inflation with the kit; to  
reduce it, press button 6.  
– depending on the vehicle, connect  
the container 8 to the compressor  
from the container recess 7;  
If a minimum pressure of 1.8 bar is  
not reached after 15 minutes, repair  
is not possible; do not drive the vehi-  
cle but contact an approved dealer.  
– unscrew the valve cap on the rele-  
vant wheel and screw on the contai-  
ner’s inflation adapter 1;  
– adapter 2 must be connected to the  
vehicle accessories socket;  
– press switch 4 to inflate the tyre to  
the recommended pressure (please  
refer to the information in the section  
on “Tyre pressure”);  
– after a maximum of 15 minutes, stop  
inflating and read the pressure (on  
pressure gauge 5).  
Please be aware that a  
poorly tightened or missing  
valve cap can make the  
tyres less airtight and lead  
to pressure loss. Always use valve  
caps identical to the original ones  
and ensure they are tightly screwed  
on.  
5.7  
TYRE INFLATION KIT (4/4)  
1
– Start immediately and drive at  
between 12 and 40 mph (20 and  
60 km/h) in order to distribute the  
product evenly in the tyre and, after  
driving for 2 miles (3 km), stop and  
check the pressure.  
– If the pressure is greater than 1.3 bar  
but less than the recommended  
pressure (refer to the label affixed to  
the edge of the driver’s door), read-  
just it. Otherwise, please contact an  
authorised dealer: the tyre cannot be  
repaired.  
Precautions when using the  
kit  
Once the tyre is correctly inflated,  
remove the kit: slowly unscrew the in-  
flation adapter 1 to prevent any repair  
product from escaping and store the  
container in plastic packaging to pre-  
vent the product from escaping.  
The kit should not be operated for more  
than 15 consecutive minutes.  
Following repair with the kit,  
do not travel further than  
120 miles (200 km). In addi-  
tion, reduce your speed and  
– Affix the driving recommendation  
label to the dashboard where it can  
easily be seen by the driver;  
under no circumstances exceed  
48 mph (80 km/h). The sticker,  
which you must affix in a prominent  
position on the dashboard, reminds  
you of this.  
Depending on the country or local  
legislation, a tyre repaired with the  
inflation kit may need to be replaced.  
– Put the kit away.  
– At the end of this initial inflation ope-  
ration, air will still escape from the  
tyre. You must drive a short distance  
in order to seal the hole.  
5.8  

Related Topics

Popular Owner Manuals