CRUISE CONTROL
– the clutch pedal for a prolonged peri-
od or if the vehicle is in neutral for a
prolonged period on vehicles equipped
with a manual gearbox
Switching off the function
– shifting to neutral position on vehi-
cles equipped with an automatic gear-
box.
3
The cruising speed is stored and dis-
played in grey on the instrument panel.
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road condi-
tions are suitable (traffic, road surface,
weather conditions, etc.). Press the
switch 5 ( RES ) if the vehicle speed is
above 19 mph (30 km/h).
When the speed is stored, cruise con-
trol activation is confirmed in green of
the cruising speed and, depending on
the vehicle, the 7 warning light is dis-
played.
The cruise control function is interrupt-
ed:
– if you press switch 3 until the "Dri-
ving assist. deactivated" message ap-
pears on the instrument panel. In this
case, there is no stored speed;
Note: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
– you press the switch 3 until the light
appears on the display. In this
case the speed limiter is selected and
there is no stored speed.
With the cruise control on standby,
press switch 6 ( SET/˗ ) or switch 1 (
SET/+ ) to reactivate the cruise control
function without taking into account the
stored speed: it is the speed at which
the vehicle is moving that is taken into
account.
The 7 warning light disappears from
the instrument panel to confirm that
the function has stopped.
Driving - 239
English 
