2024-2026 Dacia Duster SUV Driving -> Tyre pressure loss warning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Tyre pressure loss warning for Your Dacia Duster SUV Third Generation (2024-2026)

TYRE PRESSURE LOSS WARNING  
3
Operating principle  
When fitted to the vehicle, this system  
notifies the driver if one or more tyres  
lose pressure.  
This system detects a loss of pressure  
in one of the tyres by measuring the  
wheel speed while driving.  
This function is an addi-  
tional driving aid.  
The system can be identified by the 1  
The function does not  
label in the vehicle.  
take the place of the dri-  
ver. It cannot, therefore, under  
any circumstances replace the  
vigilance or the responsibility of  
the driver.  
The warning light  
2 comes on  
instrument panel to alert the driver in  
the event of insufficient pressure (tyre  
deflated, punctured etc.).  
Check the tyre pressures, includ-  
ing the emergency spare wheel,  
once a month.  
Operating conditions  
In order to provide a reliable warning in  
the event of significant pressure loss,  
Driving - 183  
TYRE PRESSURE LOSS WARNING  
the system must be reset with an infla-  
tion pressure equal to one of those  
shown on the tyre inflation pressure la-  
bel (reference values) 327.  
Resetting should always be carried  
out after checking the tyre pressure  
of all four tyres when cold.  
– use of tyres not approved by the net-  
work.  
The sudden loss of pres-  
sure in a tyre (burst tyre,  
etc.) cannot be detected by  
3
the system.  
In the following situations, the system  
risk coming into action late or not func-  
tioning correctly:  
Procedure for resetting the standard  
levels for the tyre pressures  
system not reset after reinflation or  
any operation on the wheels;  
– incorrectly reset system: tyre pres-  
sures different from the recommended  
pressures;  
This should be performed:  
after each re-inflation or resetting of  
tyre pressure;  
after changing a wheel;  
after swapping a wheel (however,  
this practice is not recommended);  
Vehicle not fitted with a multimedia  
screen  
The tyre pressure must be  
checked before starting the  
resetting procedure.  
Ignition on, vehicle stopped:  
Tyre pressures must correspond to the  
current usage of the vehicle (empty,  
carrying a load, motorway driving,  
etc.). Respect the tyre pressures (in-  
cluding the emergency spare wheel).  
Check them at least once a month and  
before a long journey (refer to the label  
on the edge of the driver’s door  
327).  
on vehicles equipped with a type A  
or B 98 instrument panel, press  
switch 3 as many times as necessary  
to reach the "VEHICLE" tab;  
briefly press switch 4 or 5 to reach  
the "Tyre pressure init. long press"  
page;  
The system will not issue a warn-  
ing if the pressure does not corre-  
spond to the recommended pres-  
sure.  
press and hold the 6 "OK" switch to  
launch the reset.  
– significant change in load or distribu-  
tion of load on one side of the vehicle;  
– sporty driving with strong accelera-  
tion;  
driving on snowy or slippery surface;  
driving with snow chains;  
Hold down the 6 switch until the "Op-  
eration completed" message appears.  
You can now drive.  
Vehicles fitted with a multimedia  
screen  
fitting a single new tyre;  
184 - Driving  
TYRE PRESSURE LOSS WARNING  
The resetting procedure must be car-  
ried out while the vehicle is station-  
ary and the ignition is switched on.  
Please refer to the multimedia instruc-  
tions for further information.  
3
Driving - 185  
TYRE PRESSURE LOSS WARNING  
Possible messages  
The table below shows the possible messages related to the tyre resetting procedure.  
Steps Messages  
Readings  
-
Tyre pressure  
init. at stop  
The message is displayed during driving. If you want to reset the pressure of the four tyres, stop the  
vehicle.  
3
1
2
Tyre pressure  
init. long press  
To reset the pressure of the four tyres, with the vehicle stationary, press and hold the 6 "OK" switch  
to launch resetting until the "If pressure OK [hold on]|" message is displayed.  
If pressure OK  
[hold on]  
The message flashes to indicate that the system has registered the resetting procedure. If all four  
tyres have been correctly adjusted to match the tyre pressure values recommended on the tyre  
pressure label327, press and hold the 6 "OK" switch until the "Operation completed" message  
appears.  
3
Operation com- The resetting procedure has been completed successfully. You can now drive.  
pleted  
186 - Driving  
TYRE PRESSURE LOSS WARNING  
Otherwise the system may come into  
action late or not function correctly  
328.  
After using the tyre inflation kit, read-  
just the tyre pressure and launch the  
resetting of the tyre pressure reference  
value.  
Readjustment of tyre pressures  
The pressure of the four tyres must  
be set when cold (refer to the label lo-  
cated on the edge of the driver's door).  
If tyre pressures cannot be checked  
when the tyres are cold, the recom-  
mended pressures should be in-  
creased by 0.2 to 0.3 bar (3 PSI).  
3
Never deflate a hot tyre.  
After each reinflation or readjustment  
of the tyre pressure, launch the reset-  
ting of the tyre pressure reference val-  
ue.  
Replacing wheels/tyres  
Only use equipment approved by the  
network.  
Otherwise the system may come into  
action late or not function correctly  
324.  
After each change of wheel/tyre, read-  
just the tyre pressure and launch the  
reset of the tyre pressure reference  
value.  
Emergency spare wheel  
If fitted on the vehicle, readjust the tyre  
pressure and launch the resetting of  
the tyre pressure reference value.  
Tyre repair product and inflation kit  
Only use equipment approved by the  
network.  
Driving - 187  
TYRE PRESSURE LOSS WARNING  
Tyre pressure faults  
The table below lists the warning messages which appear on the instrument panel when the system detects a tyre pressure  
fault.  
The information on the instrument panel signals any potential tyre pressure faults (e.g. deflated or punctured tyre).  
3
Indicator lights  
Messages  
Readings  
Inflate tyres  
and init.  
This indicates that tyre under-inflation or puncture has been detected. Check and  
adjust the pressure of the four tyres when cold and reset the system.  
comes on (not  
flashing).  
Check tyre  
This indicates that the reset has been unsuccessful. Check and readjust the tyre  
flashes, then stays  
on.  
press and init. pressure before re-launching the resetting procedure.  
flashes, then stays  
Check TPW  
This indicates a fault in the system. Consult an approved Dealer.  
on, along with the warning  
light  
This indicates that an emergency spare wheel different in size to the other four  
wheels has been fitted to the vehicle. The system remains unavailable until a  
wheel identical in size to the other wheels has been fitted and the resetting proce-  
dure has been carried out.  
TPW not  
available  
flashes, then stays  
on.  
188 - Driving  

Related Topics

Popular Owner Manuals