CHILD SAFETY: attachment by seat belt (3/4)
Refer to the “Child safety equipment” booklet available from the network to choose the seat suited to your child and rec-
ommended for your vehicle.
X = Seat not suitable for fitting child seats.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
(3) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
(4) A carrycot can be installed across the vehicle and will take up at least two seats. Place the child with its feet nearest the door.
(5) In order to install a rear-facing child seat, move the front seat as far forward as possible, then move the front seat back as far
as it will go, without allowing it to come into contact with the child seat.
(6) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting
the child seat. ➥ 3.32. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the
seat and the child’s legs.
(7) RISK OF DEATH OR SERIOUS INJURY: a child seat with a floor support must never be fitted.
1.45