CHILD SAFETY: attachment using the ISOFIX system (3/4)
Refer to the “Child safety equipment” booklet available from the network to choose the seat suited to your child and rec-
ommended for your vehicle.
X = Seat not suitable for fitting child seats.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
IUF = Seat which allows forward facing child seats with “Universal” approval to be attached using ISOFIX attachments; check
that it can be fitted correctly.
IL = Seat which allows approved “Semi-Universal” or “Vehicle specific” child seats to be fitted using ISOFIX attachments; check
that it can be fitted correctly.
i-U = Suitable for “universal” front-facing and rear-facing i-Sizerestraint devices.
(1) In order to install a rear-facing child seat, move the front seat as far forward as possible, then move the front seat back as far
as it will go, without allowing it to come into contact with the child seat.
(2) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the
child seat. ➥ 3.32. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat
and the child’s legs.
The size of the ISOFIX child seat is indicated by a letter:
– A, B and B1 [F3, F2, F2X]: for forward-facing seats in group 1 (9 to 18 kg);
– C and D [R3,R2, R2X]: rear-facing seats or shell seats in Group 0+ (less than 13 kg) or Group 1 (9 to 18 kg);
– E [R1] rear-facing shell seats in group 0 (less than 10 kg) or group 0+ (less than 13 kg);
– F and G [L1, L2]: for carrycots in group 0 (under 10 kg);
– [B2]: for booster seats in groups 2 and 3 (15 to 25 kg and 22 to 36 kg).
1.49
English 
