METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (1/6)
Depending on the vehicle, they are
composed of:
– Have the entire restraint
system checked following
an accident.
– seat belt inertia reel pretension-
ers;
– No operation whatsoever
is permitted on any part of the
system (airbag, electronic units,
wiring) and the system compo-
nents must not be reused on any
other vehicle, even if identical.
– chest force limiters;
– airbags driver and passenger
front.
These systems are designed to act in-
dependently or together when the vehi-
cle is subjected to a frontal impact.
– To avoid premature triggering
of the system which may cause
injury, only qualified Network per-
sonnel are authorisedto work on
the methods of restraint in addi-
tion to the front seat belt.
Depending on the severity of the
impact, the system can trigger:
1
– seat belt locking;
– the seat belt inertia reel pretensioner
(which engages to correct seat belt
slack);
Pretensioners
– The electric trigger system may
only be tested by a specially
trained technician using special
equipment.
The pretensioners hold the seat belt
against the body, holding the occupant
more securely against the seat, thus in-
creasing the seat belt’s efficiency.
– the airbag and force limiter.
– When the vehicle is scrapped,
contact an approved dealer for
disposal of the gas generators for
the pretensioners and airbags.
Load limiter
In the event of a severe frontal impact
and if the ignition is switched on, the
system may engage the following de-
pending on the force of the impact:
Above a certain severity of impact, this
mechanism is used to limit the force of
the belt against the body so that it is at
an acceptable level.
– the seat belt inertia reel preten-
sioner 1 which instantly retracts the
seat belt,
1.26