Get Getting To Know Your Instrument Panel Guide for Fiat 500 E 4 Door Second Generation (2020-2024)

56 GETTING TO KNOW YOUR INSTRUMENT PANEL

GETTING TO KNOW YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER

GETTING TO KNOW YOUR INSTRUMENT PANEL 57

amount of battery power being applied to move

the vehicle. The light red and light blue near

the mid section of the gauge represents Eco

Mode, which conserves energy. The bottom blue

half indicates when the battery is charging via

regenerative braking, while slowing the vehicle

down.

Use this QR code to access your digital

experience.

Scan me

INSTRUMENT CLUSTER DESCRIPTIONS

INSTRUMENT CLUSTER DISPLAY

3

Your vehicle is equipped with an instrument cluster

display, which offers useful information to the driver.

With the ignition in the OFF position, opening/closing

of a door will activate the display for viewing, and

display the total miles, or kilometers, in the odometer.

The instrument cluster display is designed to display

important information about the vehicle’s systems and

features. Using a driver interactive display located on

the instrument panel, your instrument cluster display

can show you how systems are working and give

you warnings when they are not. The steering wheel

mounted controls allow you to scroll through and enter

the main menus and submenus. You can access the

specific information you want and make selections and

adjustments.

1. Range

● Range to empty.

2. Range Trend Indicator

Instrument Cluster Display and Controls

1 – Instrument Cluster Display Screen

2 – Instrument Cluster Display Controls

● The Range Trend Indicator displays a blue up

or red down arrow indicating a higher or lower

forecasted range considering your most recent

driving style. A colored line will also appear

under range to empty.

This system allows the driver to select a variety of

useful information by pushing the switches mounted on

the instrument panel. Examples of menu items are:

● Buzzer Volume

The absence of this indicator could indicate you

are either parked, charging or your range trend

is approximately equal to the forecasted range.

● Exit Menu

If equipped with a Uconnect system, some customer

programmable features will display in the radio

page 113.

ð

3. Battery Level Gauge

LOCATION AND CONTROLS

The instrument cluster display features a driver

interactive display that is located in the instrument

cluster.

The system allows the driver to select information

by pushing the following buttons mounted on the

instrument panel to the left of the steering column:

● Indicates the current battery level.

4. Speedometer

● Indicates vehicle speed.

5. Power/Eco/Charge Gauge

● Indicates current energy management. The red

upper half of the gauge indicates the current

58 GETTING TO KNOW YOUR INSTRUMENT PANEL

● OK Button

FIRE DANGER! PULL OVER NOW! EXIT

QUICKLY!

Push the OK button to access/select the information

screens or submenu screens of a main menu item.

Push and hold the OK button for one second to reset

displayed/selected features that can be reset.

STOP SAFELY VEHICLE WILL SHUT OFF SOON

Instrument Cluster Display Control Buttons

1 — Up Arrow Button

2 — OK Button

3 — Right Arrow Button

4 — Left Arrow Button

5 — Down Arrow Button

Fire Danger! Pull Over Now!

Exit Quickly! Warning Message

A warning will appear on the instrument panel display

if the system detects the high voltage battery has

overheated. This can result in a vehicle fire, and the

release of toxic and/or flammable gases. To reduce

the risk of a larger fire, the vehicle’s high voltage

propulsion system will turn off within thirty seconds of

displaying this warning. At that time, the vehicle may

not accelerate. You can still steer and brake the vehicle.

This high priority message

● Left Arrow Button

Push and release the left arrow button to scroll

leftward through the main menu and submenus.

Stop Safely Vehicle Will

Shut Off Soon Warning Message

● Up Arrow Button

This warning will be displayed on the instrument panel

display when the vehicle has determined an operational

issue will occur shortly, which will cause the vehicle's

propulsion system to turn off. If this message appears

while driving, stop the vehicle in a safe location as

soon as possible. Have the vehicle transported to an

authorized dealer.

Push and release the up arrow button to access

the information screens or submenu screens of a

main menu item.

● Right Arrow Button

● displays continuously.

Push and release the right arrow button to scroll

rightward through the main menu and submenus.

● cannot be cleared with a button press.

● has a rapid and continuous chime.

● This is a high priority message

● This message will be displayed continuously

● Down Arrow Button

Push and release the down

information screens or submenu screens of a main

menu item.

button to access the

● Cannot be cleared with button press

● A single chime will sound

GETTING TO KNOW YOUR INSTRUMENT PANEL 59

Stop and park the vehicle in an open area. Have all

passengers exit the vehicle as soon as possible and

move to a safe distance away from the vehicle. After

all passengers safely exit the vehicle, call emergency

responders immediately. Even if you do not see flames,

a fire may start at any moment. Do not attempt to

reenter or start the vehicle.

This option features a large round bar graph

which displays a visualization of the current energy

management, similar to the Power/Eco/Charge

Gauge.

● Lane Control

● TSR (Traffic Sign Recognition)

● ISA (Intelligent Speed Assist)

● Co-Driver with Follow to Stop or Co-Driver with

Stop&Go

○ “POWER”: Represent the current amount of

battery power being applies to move the vehicle.

○ “ECO”: Eco Mode, indicates energy-saving driving.

Vehicle Info

INSTRUMENT CLUSTER DISPLAY MAIN MENU

The Main Menu is composed of several options that

can be selected by using the control buttons.

○ “CHARGE”: Charge mode, indicates when

regenerative braking is being used to both charge

the battery and slow the vehicle.

Push up or down arrow button to scroll through the

following information displays:

3

● Tire pressure

NOTE:

Trip

● The display mode of the menu items varies

depending on the type of display.

○ Indicates the inflation state of each tire.

○ Hold the OK button to perform reset procedure.

● Service (Scheduled Servicing)

This instrument cluster display menu item allows you to

view and select information about the "Trip Computer”:

● For some items, a submenu is provided.

● Trip A/Trip B

● If equipped with a Uconnect system, some customer

programmable features and menus will display in

the radio and not on the instrument cluster display.

Audio

○ View instant consumption (mi/kWh, km/kWh,

kWh/100km, kWh/mi, or MPGe).

This menu item allows you to view the instrument

cluster display and the information present on the

display of the Uconnect system.

page 57.

ð

○ View average consumption (mi/kWh, km/kWh,

kWh/100km, kWh/mi, or MPGe).

Home Screen

The information displayed is:

○ View Trip distance (miles or km).

○ View average speed (mph or km/h).

○ View travel time (hours/minutes/seconds).

○ Reset instructions.

The Home Screen has two view options to choose from.

● “Radio (AM or FM)”: view Radio Station Name (if

equipped), frequency, and graphical icon.

● Enhanced Speedometer

○ This option features an large enhanced bar graph

speedometer to visually represent current speed.

When a speed control system is active, the graph

also provides visual cues for the different states

of that particular speed control system.

● AUX: Title display or song number playing.

● USB: Title display or song number playing.

● Ipod: Display the song title and graphic element.

Driver Assist — If Equipped

This menu item shows messages, statuses, and visual

indications for the following driving aid systems:

● Bluetooth®: Displays the song title and a graphic

element.

● Power/Eco/Charge Indicator

● ACC (Adaptive Cruise Control)

● DAB: Title display or song number playing.

60 GETTING TO KNOW YOUR INSTRUMENT PANEL

● SAT/SXM (if equipped): displays the station name

and a graphic element.

Settings — If Equipped

● Map

○ Zoom in and out by pressing up/down arrows.

This menu item allows you to change the settings for

the following:

● APP: Displays strings and a graphic element.

Messages (Stored)

● CarPlay®/Android Auto®/Amazon Alexa®: displays

strings and a graphic element.

● Display

This menu item allows you to display the information

messages/malfunction stored.

● Units

● Clear Audio Infocode: Displays blank screen.

● MUTE: Displays a graphic element.

● Clock and Date

● Security

In case one or more new message are stored while user

is viewing an ambient different from Stored Messages,

in the menu bar a small badge should appear next to

Stored Message miniature with the number of recently

stored messages.

Phone

● Safety and Assistance

● Mirrors & Wipers

● Lights

This menu displays the current status of a phone

connected to the vehicle via Bluetooth®.

Tutorials

If no phone is connected, the menu will not function

when the OK button is pushed. Otherwise, if a phone is

connected, push the OK button to enter the menu. The

following items will display:

● Brakes

The tutorial function is available on the vehicle to

obtain essential information on some of its features.

● Doors and Locks

● Charging Schedule

● Start Pairing Process

● Engine OFF Procedure

Display

The tutorials also proved tips in the form of pop-ups

shown on the instrument panel display during the

journey.

● Recent calls: displays a short list of previous calls.

● SMS reader: displays a short list of previous text

messages and if they are read or unread.

Tutorial

● Favorite numbers: displays a maximum of 10 favorite

numbers.

● Display Tips

By selecting "Display", you can access the following

settings:

○ Electric Features

○ Safety and Assist

○ Other Features

Navigation

● Screen Setup: Allows you to configure the display

screen.

If activated, this menu item will display navigation

status and directions. User can choose two different

layouts with the contextual menu:

● EV Contents: Allows you to select “On” or “Off” for

READY popup, Power/Charge gauge, Key-on/Key-off

sounds and EV external sounds.

● Stored Tips

● Slideshow

● Pictograms

○ Distance to next maneuver.

○ Name of the street.

● Tutorial pages visualization: Allows you to select “On”

or “Off”.

○ Turn-by-turn indication.

GETTING TO KNOW YOUR INSTRUMENT PANEL 61

● Language: Allows you to select the language in which

to display the information/warnings.

● Set Time: Adjust hours/minutes.

● Traffic Sign Recognition: Allows you to select “On” or

“Off”.

● Set Format: Adjust the time format "12h" (12 hours)

or "24h" (24 hours).

● Instrument Cluster Backlight: Allows you to increase/

decrease the brightness from level 1 to 8.

● Traffic Sign Recognition Warning: A selection of the

type of information of the warning (Off, Visual or

Visual and Chime).

● Set Date: Adjust day/month/year.

Security

● Automatic Reset Trip B: Allows you to set the options

to reset the Trip B (never, always, every two hours or

every eight hours).

● New Speed Zone Detection: A selection of the type of

information of the detection (Off, Visual or Visual and

Chime).

By selecting the item “Security”, you can make the

following adjustments:

● Phone Repetition: Allows you to select “On” or

“Off”. The instrument cluster display can also

display the information concerning phone mode.

The information that can be displayed is the

connection status of the mobile phone (phone

connected or disconnected), the active telephone

calls/incoming/on hold, and the management of

double calls (first incoming second waiting, etc.).

● Autonomous Emergency Braking (AEB)/Forward

Collision Warning: A selection of the type of

information of the warning (Off, Only Warning or

Warning and Active Braking).

● Passenger Airbag: Activation/Deactivation of the

passenger airbag.

3

● Speed Warning: Set the vehicle speed limit (mph or

km/h), which the driver is notified through a visual

and acoustic signaling (display of a message and a

symbol on the display).

● AEB/Forward Collision Sensitivity: Increase or

decrease the sensitivity of the system by selecting

“Near”, “Medium”, or “Far”.

● Seat Belt Buzzer: This function is only viewable when

the Seat Belt Reminder (SBR) system is active.

● Navigation Repetition: Allows you to select “On” or

“Off” on the instrument cluster display, information

relating to the navigation mode.

● Park Assist: A selection of the type of information

provided by Park Assist.

Safety And Assistance

● Park Assist Vol.: A selection of the volume of

acoustic signals provided by Park Assist.

Units

By selecting the item "Safety & Assistance", you can

make the following adjustments:

By selecting the item "Units Of Measure”, you can

select the unit of measure used in the display.

● Attention Assist/Drowsy Driver Alert: Enabling/

Disabling the alert.

● Warning Buzzer Volume: Increase or decrease the

volume of the buzzer by selecting “Off”, “Low”,

“Medium”, or “High”.

Possible options are:

● Blind Spot Assist: Off, Lights, Lights and Chime.

Mirrors & Wipers

● US

● LaneSense Warning — If Equipped: A selection of the

"readiness" of intervention of LaneSense.

● Metric

By selecting the item "Mirrors & Wipers”, you can make

the following adjustments:

● Custom

Clock And Date

● LaneSense Strength — If Equipped: Increase or

decrease the lanesense strength by selecting “Low”,

“Medium”, or “High”.

● Rain Sensing Auto Wipers: Enabling/disabling the

automatic operation of wipers in the event of rain.

By selecting the item "clock and date", you can adjust

the clock.

● Intelligent Speed Assist: A selection of the type of

function provided by the system (confirmation or

automatic).

Possible options are:

62 GETTING TO KNOW YOUR INSTRUMENT PANEL

Lights

● Auto Unlock On Exit: Automatic unlocking of the

doors when exiting the vehicle.

WARNING LIGHTS AND MESSAGES

By selecting the item "Lights", you can make the

following adjustments:

The warning/indicator lights will illuminate in the

instrument panel together with a dedicated message

and/or acoustic signal when applicable. These

indications are indicative and precautionary and as

such must not be considered as exhaustive. Always

refer to the information in this chapter in the event of a

failure indication. All active telltales will display first if

applicable. The system check menu may appear

different based upon equipment options and current

vehicle status. Some telltales are optional and may not

appear.

● Flash Light With Lock: Activate the direction

indicators when closing the doors.

● Headlight Sensitivity: Adjust the sensitivity of

headlight brightness.

● Sound Horn With Lock: Activate/deactivate the horn

when pushing the lock button on the Remote

Keyless Entry. The options are "Off," "First Press,”

and "Second Press."

● Interior Ambient Lights: Increase or decrease the

brightness of the Interior Ambient Lights.

● Greeting Lights: Enable/disable the vehicle’s

Greeting Lights.

● Remote Door Unlock Without Passive Entry: Allows

you to choose whether to unlock all the doors or only

the driver’s side door on the first push of the unlock

button on the Remote Keyless Entry.

● Auto High Beam: Activate/deactivate the automatic

main beam headlights — If Equipped.

● Daytime Running Lights: Activate/deactivate the

daytime running lights.

● Passive Entry — If Equipped: Activate the automatic

locking of the doors.

RED WARNING LIGHTS

Air Bag Warning Light

● Cornering Lights: Activate/deactivate the cornering

lights — If Equipped.

Charging Schedule

This warning light will illuminate to indicate

a fault with the air bag, and will turn on

for four to eight seconds as a bulb check

By selecting the item "Charging Schedule", you can

make the following adjustments:

● Headlight Off Delay: Set the delay for headlight

shutoff after engine shutoff.

when the ignition is placed in the ON/RUN

position. This light will illuminate with a single chime

when a fault with the air bag has been detected, it will

stay on until the fault is cleared. If the light is either not

on during startup, stays on, or turns on while driving,

have the system inspected at an authorized dealer as

soon as possible.

Brakes

● Set Schedule: Set the charging schedule for

weekends or weekdays.

By selecting the item “Brakes”, you can make the

following adjustments:

● Activate Schedule: Activate/deactivate the charging

schedule.

● Hold’n Go: Allows you to select “On” or “Off”.

● Brake Service: Enables a special procedure.

● Set Power Level: Adjust the power level of the

charge.

Brake Warning Light

● Auto Park Brake: Enable/disable auto-insertion of

the Electric Parking Brake.

Start Pairing Process

Engine OFF Procedure

This warning light monitors various brake

functions, including brake fluid level and

parking brake application. If the brake light

turns on it may indicate that the parking

brake is applied, that the brake fluid level is low, or

that there is a problem with the Anti-Lock Brake

System reservoir.

Doors And Locks

Allows you to turn off the engine from the instrument

cluster in the event of an ignition switch failure.

Instructions for turning off the engine via the

instrument cluster display controls will display in the

instrument cluster.

By selecting the item "Doors & Locks", you can make

the following adjustments:

● Auto Door Lock: Activate/deactivate the automatic

locking of the doors with the vehicle moving.

GETTING TO KNOW YOUR INSTRUMENT PANEL 63

If the light remains on when the parking brake has been

disengaged, and the fluid level is at the full mark on the

master cylinder reservoir, it indicates a possible brake

hydraulic system malfunction or that a problem with the

Brake Booster has been detected by the Anti-Lock

Brake System (ABS) / Electronic Stability Control (ESC)

system. In this case, the light will remain on until the

condition has been corrected. If the problem is related

to the brake booster, the ABS pump will run when

applying the brake, and a brake pedal pulsation may be

felt during each stop.

Door Open Warning Light

WARNING!

It will take longer to stop the vehicle. You could have

a collision. Have the vehicle checked immediately.

This indicator will illuminate when the

respective door is ajar/open and not fully

closed.

Vehicles equipped with the Anti-Lock Brake System

(ABS) are also equipped with Electronic Brake Force

Distribution (EBD). In the event of an EBD failure, the

Brake Warning Light will turn on along with the ABS

Light. Immediate repair to the ABS system is required.

NOTE:

If the vehicle is moving, there will also be a single

chime.

Drowsiness Detected Warning Light

3

Operation of the Brake Warning Light can be checked

by turning the ignition switch from the OFF position to

the ON/RUN position. The light should illuminate for

approximately two seconds. The light should then turn

off unless the parking brake is applied or a brake fault

is detected. If the light does not illuminate, have the

light inspected by an authorized dealer.

Driver drowsiness detection helps to avoid

crashes caused by fatigue by advising

drivers to take a break in time. Once Drowsy

Driver is detected, A pop-up will display

continuously until the driver presses the OK button to

clear.

The dual brake system provides a reserve braking

capacity in the event of a failure to a portion of the

hydraulic system. A leak in either half of the dual brake

system is indicated by the Brake Warning Light, which

will turn on when the brake fluid level in the master

cylinder has dropped below a specified level.

Once the pop-up message is cleared, it is stored until

the condition is no longer true.

The light also will turn on when the parking brake is

applied with the ignition switch in the ON/RUN position.

The light will remain on until the cause is corrected.

NOTE:

E-Latch Fault Warning Light

The light may flash momentarily during sharp cornering

maneuvers, which change fluid level conditions. The

vehicle should have service performed, and the brake

fluid level checked.

This light shows only that the parking brake is applied.

It does not show the degree of brake application.

This indicator will illuminate to indicate

a failure of the respective door’s locking

system. Contact your authorized dealer to

have the system repaired.

Battery Charge Warning Light

If brake failure is indicated, immediate repair is

necessary.

This warning light will illuminate when the

12V battery is not charging properly. If it

stays on, there may be a malfunction with

the battery or charging system. Contact an

authorized dealer as soon as possible.

Electric Power Steering (EPS) Fault

Warning Light

WARNING!

This warning light will turn on when there's a

Driving a vehicle with the red brake light on is

dangerous. Part of the brake system may have failed.

fault with the EPS system

page 74.

ð

This indicates a possible problem with the electrical

system or a related component.

(Continued)

64 GETTING TO KNOW YOUR INSTRUMENT PANEL

WARNING!

● “Service Charging System” – If you see this

message, it is recommended to unplug and plug in

again, or try a different charging station. If an issue

continues, contact an authorized dealer to service

your high voltage charging system.

SOS Battery Fault Warning Light — If

Equipped

Continued operation with reduced assist could pose

a safety risk to yourself and others. Service should be

obtained as soon as possible.

This warning light will illuminate to signal

a fault with the SOS Battery system. If the

light stays on or comes on during driving, we

recommend you drive to the nearest service

center and have the vehicle serviced immediately.

● “Issue Detected Check External Charging Station” –

If you see this message, the charging station may be

powered off, having internal fault or being scheduled

to charge later. It is recommended to try a different

charging station. If an issue continues, then contact

an authorized dealer.

Service Electrical System Warning Light

This warning light will illuminate when

service to the electrical system is needed.

It will be accompanied by a message in the

cluster. If the telltale stays on or continues

to come on, contact an authorized dealer as soon as

possible.

SOS Fault Warning Light — If Equipped

The symbol appears to indicate a failure

in the EU eCall system. In this case, an

emergency call cannot be made. Contact

your authorized dealer as soon as possible

to have the system repaired.

NOTE:

● Older or non-compliant J1772 EVSE models may

not support charging of this vehicle. If this vehicle

does not charge, it may be connected to a non-

compliant Level 2 EVSE, and will flash indicators.

Please identify this failure to the site operator and/or

EVSE provider.

Hood Open Warning Light

Traction Battery Fault Warning Light

This warning light will illuminate when the

hood is left open and not fully closed.

This light alerts the driver that there is

a failure in the Traction Battery System.

Contact an authorized dealer if illumination

persists.

● Before this vehicle can be driven, the EVSE Charging

Cord must be disconnected from the vehicle.

Trunk Open Warning Light

This indicator will illuminate when the trunk

is open and not fully closed.

Low High-Voltage Battery State Of

Charge

Seat Belt Reminder Warning Light

When the ignition is first placed in the

ON/RUN position, if the driver’s seat belt is

unbuckled, a chime will sound and the light

will turn on. When driving, if the driver or

The symbol appears on the instrument

panel display in case of low state of charge

of the high-voltage battery, charge high-

voltage battery.

Plug Status Fault Warning Light

This warning light will illuminate when a

plug status fault is detected (when vehicle

not in motion). It will be accompanied by a

cluster message indicating the type of fault.

You may receive one of the following messages if a fault

is detected:

front passenger seat belt remains unbuckled, the Seat

Belt Reminder Light will flash or remain on continuously

and a chime will sound

page 143.

Transmission Fault Warning Light

ð

The warning light switches on when the

ignition device is brought to the ENGINE

position but it should switch off after a few

seconds.

GETTING TO KNOW YOUR INSTRUMENT PANEL 65

The warning light flashes, along with an acoustic

warning, to indicate a transmission failure.

If the ABS light does not turn on when the ignition is

placed in the ON/RUN position, have the brake system

inspected by an authorized dealer.

Electric Park Brake Failure Warning Light

This warning light will illuminate to indicate

the Electric Park Brake is not functioning

properly and service is required. Contact an

authorized dealer.

Torque Limited Warning Light

Adaptive Cruise Control (ACC) Fault

Warning Light — If Equipped

This warning light illuminates when vehicle

acceleration is limited due to a reduction

in battery or electric motor performance.

Contact your authorized dealer for service

if illumination persists.

Electronic Stability Control (ESC) OFF

Warning Light

This warning light will illuminate to indicate

a fault in the ACC system. Contact a local

authorized dealer for service

79.

page

ð

This warning light indicates the ESC is off.

Each time the ignition is switched to ON/

RUN, the ESC system will be on, even if it

was turned off previously.

3

YELLOW WARNING LIGHTS

Automatic High Beam Warning Light

Acoustic Vehicle Alerting System (AVAS)

Fault Warning Light

This warning light switches on to report

a failure of the automatic high beam

headlights. Contact an authorized dealer.

Electronic Stability Control (ESC) Active

Warning Light

This light alerts the driver that the AVAS

system is not functioning properly. If the

light stays on contact and authorized dealer

for service.

Blind Spot Detection System Failure

This warning light will indicate when the

ESC system is Active. The ESC Indicator

Light in the instrument cluster will come on

when the ignition is placed in the ON/RUN

This warning light switches on to report a

failure of the blind detection spot system.

Contact an authorized dealer.

Anti-Lock Brake System (ABS) Warning

Light

position, and when ESC is activated. It should turn

off within a few seconds. If the ESC Indicator Light

remains on in the RUN position, a malfunction has

been detected in the ESC system. If this warning light

remains on after several ignition cycles, and the vehicle

has been driven several miles (kilometers) at speeds

greater than 30 mph (48 km/h), see an authorized

dealer as soon as possible to have the problem

diagnosed and corrected.

Brake Failure

This warning light monitors the ABS. The

light will turn on when the ignition is placed

in the ON/RUN position and may stay on for

as long as four seconds.

This warning light illuminates together with

the same red warning light flashing in the

event of a brake system failure or low brake

fluid level. Contact an authorized dealer.

If the ABS light remains on or turns on while driving,

then the Anti-Lock portion of the brake system is not

functioning and service is required as soon as possible.

However, the conventional brake system will continue to

operate normally, assuming the Brake Warning Light is

not also on.

Drowsiness Detected Warning Light

This warning light switches on to report

a failure of the Drowsy Driver Detection

device. Contact an authorized dealer.

● The ESC OFF Indicator Light and the ESC Indicator

Light come on momentarily each time the ignition is

placed in the ON/RUN position.

66 GETTING TO KNOW YOUR INSTRUMENT PANEL

● The ESC system will make buzzing or clicking sounds

when it is active. This is normal; the sounds will stop

when ESC becomes inactive.

Low Washer Fluid Warning Light

Speed Limiter Failure

This warning light will illuminate when the

windshield washer fluid is low.

This warning light will illuminate to indicate

a fault in the Speed Limiter system. Contact

a local authorized dealer for service.

● This light will come on when the vehicle is in an ESC

event.

Park Sensors System Failure

Tire Pressure Monitoring System (TPMS)

Warning Light

Forward Collision Warning (FCW) Fault

Light/Camera Blinded

The telltale will illuminate when there is a

fault in the parking sensors.

Low tire pressure

This warning light will illuminate to indicate

a fault in the Forward Collision Warning

System or if a Camera is Blinded. Contact

an authorized dealer for service.

The warning light switches on constantly

to indicate that the tyre pressure is lower

than the recommended value, in order to

Rain Sensor Failure Light

The telltale will illuminate in the case of

failure of the automatic windshield wiper.

Contact an authorized dealer as soon as

possible.

guarantee long tire life and optical electrical energy

consumption, or to indicate a slow loss of pressure.

Immobilizer Fail / VPS Electrical Alarm

Warning Light

In this way the iTPMS warns the driver that one or more

tyres may be flat and probably punctured.

This telltale will illuminate when the vehicle

security system has detected an attempt to

break into the vehicle.

Service Lanesense Warning Light — If

Equipped

In this case it is advisable to restore the correct

pressure value. Once the normal operating conditions

of the car are restored, carry out the Tire reset

procedure.

This warning light will illuminate when the

Lanesense system is not operating and

requires service. Please see an authorized

dealer.

NOTE:

After cycling the ignition to the ON/RUN position, the

Vehicle Security Warning Light could illuminate if a

problem with the system is detected. This condition will

result in the engine being shut off after two seconds.

NOTE:

Do not continue driving with one or more flat tires as

handling of the car may be compromised. Stop the car,

avoiding sharp braking and steering.

Service Required/Call For Service

Warning Light

Keyless System Failure Indicator Light

iTPMS failure/iTPMS temporarily deactivated

The telltale will illuminate in the event of

keyless system failure.

This warning light will illuminate when

service is needed. A pop-up will appear in

the display to signal the need for service.

Contact an authorized dealer as soon as

possible.

The warning light flashes for about 75 seconds and

then stays on constantly to indicate that the system is

temporarily deactivated or faulty. The system goes back

to normal operation when the operating conditions

allow it. If this is not the case, carry out the Tyre

Contact an authorized dealer as soon as

possible.

GETTING TO KNOW YOUR INSTRUMENT PANEL 67

reset procedure after restoring the normal operating

conditions.

Traffic Sign Recognition (TSR) Fault

Warning Light

Lane Keeping Assist OFF — If Equipped

This light will illuminate when the Active

Lane Management system is switched OFF.

If the malfunction warning persists, contact a Fiat

Dealership as soon as possible.

This light will illuminate to indicate a TSR

fault. Contact an authorized dealer if the

light remains on after restarting vehicle.

WARNING!

Forward Collision Warning (FCW) OFF

Indicator Light — If Equipped

Traction Battery Cut-off Warning Light —

If Equipped

If the system signals a pressure drop on a specific

tire, it is recommended to check the pressure on

all four tires. The iTPMS does not relieve the driver

from the obligation to check the tire pressure every

month; it is not to be considered a system to replace

servicing or a safety system. Tire pressure must be

checked with tires cold. Should it become necessary

for whatever reason to check pressure with warm

tires, do not reduce pressure even though it is higher

than the prescribed value, but repeat the check when

tires are cold.

This indicator light illuminates to indicate

that Forward Collision Warning is off.

3

This telltale will turn on to indicate the

Traction Battery system is not functioning

properly. Contact an authorized dealer if

illumination persists.

Icy Road Condition Indicator Light

This light will illuminate during an icy road

condition.

Twilight Sensor Fault Warning Light

This light will illuminate to indicate a failure

of the Twilight sensor. Contact an authorized

dealer.

Press Brake Pedal Indicator Light

CAUTION!

This telltale will illuminate to indicate that

the brake pedal must be pressed to enable

starting.

YELLOW INDICATOR LIGHTS

The iTPMS cannot indicate sudden tire pressure

drops (for example when a tire bursts). In this case,

stop the car, braking with caution and avoiding

abrupt steering. The system only warns that the

tire pressure is low: it is not able to inflate them.

Insufficient tire inflation increases electrical energy

consumption, reduces the tread duration and may

affect your ability to drive safely.

Exterior Lights Failure Indicator Light

The telltale will illuminate to indicate a

failure on the following lights: Daytime

Running Lights (DRLs) / parking lights /

side lights / turn signal indicators / rear

fog light / reversing light / brake lights / license plate

lights.

Rear Fog Indicator Light

This indicator light will illuminate when the

rear fog lights are on.

Traffic Sign Recognition (TSR) OFF Light

The failure may be caused by a blown bulb, a blown

protection fuse, or an interruption of the electrical

connection. Replace the bulb or the relevant fuse.

Contact an authorized dealer.

This light will illuminate when the TSR

system is switched OFF.

68 GETTING TO KNOW YOUR INSTRUMENT PANEL

GREEN INDICATOR LIGHTS

signals can be activated when the multifunction lever is

moved down (left) or up (right).

Intelligent Speed System Assist — If

Equipped

Adaptive Cruise Control (ACC) — If

Equipped

NOTE:

This light will turn on when the Intelligent

Speed System Assist is ON.

● A continuous chime will sound if the vehicle is driven

more than 1 mile (1.6 km) with either turn signal on.

This light will turn on when the Adaptive

Cruise Control is ON.

page 79.

● Check for an inoperative outside light bulb if either

indicator flashes at a rapid rate.

ð

Park/Headlights On Indicator Light

This indicator light will illuminate when the

park lights or headlights are turned on.

Auto HOLD Indicator Light — If Equipped

WHITE INDICATOR LIGHTS

Auto HOLD keeps your vehicle at a complete

stop without you having to keep your

foot on the brake pedal. Once engaged a

green “HOLD” indicator will appear in the

Instrument Cluster Display.

Adaptive Cruise Control READY (ACC) — If

Equipped

Plugged In Indicator Light

This indicator will illuminate when the

vehicle is plugged in.

This light will turn on when the Adaptive

Cruise Control is READY.

page 79.

ð

Automatic High Beam Indicator Light — If

Equipped

Ready To Drive Indicator Light

Cruise Control READY Indicator Light

This indicator shows that the automatic high

This indicator light will illuminate to indicate

that the vehicle has enough power to be

driven, regardless of the speed of the

vehicle.

This light will turn on when the Cruise

Control has been turned on, but not set

page 78.

beam headlights are on

page 38.

ð

Cruise Control SET Indicator Light

Intelligent Adaptive Cruise Control READY

(ACC) — If Equipped

Speed Limiter ON— If Equipped

This indicator light will illuminate when the

Cruise Control system is ON

page 78.

This light will turn on when the Speed

Limiter is ON.

ð

This light will turn on when the Intelligent

Adaptive Cruise Control is READY.

79.

page

ð

Intelligent Adaptive Cruise Control (ACC)

— If Equipped

Turn Signal Indicator Lights

When the left or right turn signal is

This light will turn on when the Intelligent

activated, the turn signal indicator will

flash independently and the corresponding

exterior turn signal lamps will flash. Turn

Adaptive Cruise Control is ON.

page

ð

79.

GETTING TO KNOW YOUR INSTRUMENT PANEL 69

Intelligent Speed Assist READY— If

Equipped

The symbol appears when the Intelligent

Speed Assist is READY.

Speed Limiter Ready— If Equipped

The symbol appears to indicate that the

Speed Limiter is READY.

3

BLUE INDICATOR LIGHTS

High Beam Indicator Light

This indicator light will illuminate to indicate

that the high beam headlights are on.

With the low beams activated, push the

multifunction lever forward (toward the front

of the vehicle) to turn on the high beams. Pull the

multifunction lever rearward (toward the rear of the

vehicle) to turn off the high beams. If the high beams

are off, pull the lever toward you for a temporary high

beam on, "flash to pass" scenario.

Getting To Know Your Instrument Panel for Your Fiat 500 E 4 Door Second Generation (2020-2024)

Related Topics

Getting To Know Your Vehicle

Popular Owner Manuals

Latest Owner Manuals