Get KNOWING THE INSTRUMENT PANEL -> TRIP COMPUTER Guide for Fiat Doblo Van 2010-2022

Average consumption B

Average speed B

Trip time B (driving time)

Trip B reset

Distance travelled

TRIP COMPUTER

This value shows the distance travelled

from the start of the new journey.

IN BRIEF

Average consumption (for versions/

markets, where provided)

The Trip computer is used to display

information on vehicle operation

when the ignition key is turned to

MAR. This function allows you to

define two separate trips, called "Trip

A" and "Trip B", for monitoring the

"complete mission" (journey) of

the vehicle in a reciprocally

11)

This value shows the approximate

average fuel consumption from the start

of the new journey.

Values displayed

External temperature

Indicates the temperature outside the

vehicle passenger compartment.

Instant consumption (for versions/

markets where provided)

Range (for versions/markets, where

provided)

This value shows the fuel consumption.

The value is constantly updated. The

display will show "- - - -" if the vehicle is

parked with the engine running.

independent manner. Both functions

can be reset (reset means start of

a new journey).

This indicates the distance that can still

be travelled with the fuel in the tank,

assuming that driving style remains

unvaried. The display will show the

reading "- - - -" when the following

events take place:

Average speed

"Trip A" can be used to display the

values relating to:

This value shows the vehicle's average

speed based on the overall time

elapsed since the start of the new

journey.

External temperature

Range

range is lower than 50 km (or

corresponding figure in mi)

vehicle is left parked with the engine

running for a long time

Distance travelled A

Average consumption A

Instant consumption

Average speed A

IMPORTANT The range can be affected

by several factors: driving style (see

paragraph “Driving style” in the

“Starting and driving” section), type of

route (motorway, towns and cities,

mountain roads, etc…), usage

Trip time A (driving time)

Reset Trip A

"Trip B", available on multifunction

display only, is used to display

the values relating to:

conditions (load, tyre pressures, etc…).

Trip planning must therefore take the

above into account.

Distance travelled B

80

Trip time

Start of journey procedure

Time elapsed since the start of the new

journey.

With the ignition key in the MAR

position, reset by pressing the TRIP

button and keeping it pressed for more

than 2 seconds.

IMPORTANT If there is no information,

the Trip computer displays "----" in

place of the value. When normal

operating conditions are restored, the

counting of the various values is

resumed, without either zeroing the

values displayed prior to the problem,

or starting a new mission.

Exit Trip

You can automatically exit the TRIP

function once all the values have been

displayed or by holding the MENU

button (*) down for more than 1

second.

F0V0010

118

“automatic” resetting, when the

distance travelled reaches 3,999.9 km

or 9,999.9 km (depending on the type

of display) or when the travel time

reaches 99.59 (99 hours and 59

minutes);

(*) For versions/markets where

provided.

TRIP control button

The TRIP button is located at the end of

the right stalk fig. 118. With the ignition

key turned to MAR, this button allows

you to view the previously described

values and also zero them to begin

a new journey:

WARNING

after disconnection/reconnection of

the battery.

11) The “Trip B” function may be disabled

(see paragraph “Activating Trip B”).

"Range" and "Instantaneous fuel

IMPORTANT The reset operation when

“Trip A” details are being displayed

only resets the information associated

with this function.

brief press to access the various

values displays;

consumption" parameters cannot be reset.

long press to reset and then start a

new mission.

New mission

IMPORTANT The reset operation when

“Trip B” details are being displayed

resets only the information associated

with this function.

This begins after a reset:

"manual" resetting by the user, by

pressing the relevant button;

81

EOBD SYSTEM

47)

WARNING

The EOBD system (European On Board

Diagnosis) allows continuous diagnosis

of emission-related components on

the vehicle to be made. It also alerts the

driver, by turning on warning light

in the instrument panel (together

with the relevant message in the display

on some versions), when these

components are no longer in peak

condition (see "Warning lights and

messages" section).

47) If, when the ignition key is turned to

MAR, the

switch on, switches on constantly or

flashes when driving (on certain versions

together with the message on the display),

contact a Fiat Dealership as soon as

warning light does not

possible. The operation of

warning

light may be checked by the traffic police

using specific devices. Always comply with

the traffic regulations in force in the

country where you are driving.

The goal of the system is to:

monitor the efficiency of the system;

indicate an increase in emissions

due to vehicle malfunction;

indicate the need to replace

components which have deteriorated.

The system also has a connector

that can be interfaced with appropriate

equipment, which makes it possible

to read the error codes stored in the

control unit together with a series

of specific parameters for engine

operation and diagnosis.

This check can also be carried out by

traffic control authorities.

IMPORTANT After eliminating the

failure, to check the system completely,

Fiat Dealerships run a bench test and,

if necessary, road tests which may

also call for a long journey.

82

WARNING LIGHTS AND MESSAGES

The warning light switches on together with (where the instrument panel permits) a specific message and/or acoustic signal.

These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the

information contained in the Owner Handbook, which you are advised to read carefully in all cases. Always refer to the

information in this chapter in the event of a failure indication.

IMPORTANT Failure indications displayed are divided into two categories: serious and less serious failures. Serious faults are

indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning "cycle" with a shorter

duration. The display cycle of both categories can be interrupted. The instrument panel warning light will stay on until the cause

of the malfunction is eliminated.

Warning lights on

panel

What it means

What to do

LOW BRAKE FLUID/HANDBRAKE ENGAGED

The warning light switches on when the key is turned to

MAR, but it should switch off after a few seconds.

Restore the brake fluid level, then check that the

warning light has switched off.

Low brake fluid level

The warning light switches on when the brake fluid in

the reservoir falls below the minimum level, possibly due

to a leak in the circuit.

If the warning light turns on when travelling (on certain

versions together with the message on the display) stop

the vehicle immediately and contact a Fiat Dealership.

red

Handbrake engaged

Release the handbrake, then check that the warning

light has switched off.

The warning light switches on when the handbrake is

engaged.

If the warning light stays on, contact a Fiat Dealership.

83

Warning lights on

panel

What it means

What to do

EBD FAILURE

The simultaneous switching on of the

(amber) and (amber) warning lights (for

(red),

red

versions/markets, where provided), with the engine on,

indicates either a failure of the EBD system or that the

system is not available. In this case, the rear wheels

may suddenly lock and the vehicle may swerve when

braking sharply.

Drive very carefully to the nearest Fiat Dealership to

have the system inspected immediately.

amber

The display shows the dedicated message.

AIRBAG FAILURE

When the key is turned to MAR, the warning light

switches on but it should switch off after a few seconds.

The warning light stays on constantly if there is a fault in

the airbag system.

48) 49)

red

On some versions, the display shows the dedicated

message.

84

Warning lights on

panel

What it means

SEAT BELTS NOT FASTENED

What to do

(for versions/markets, where provided)

The warning light switches on constantly with the

vehicle stationary and the driver's side or passenger

side seat belt (in versions where provided) not fastened.

The warning light flashes and a buzzer will sound if the

vehicle is in motion and the driver’s seat belt is not

correctly fastened.

For permanent deactivation of the SBR (Seat Belt

Reminder) system buzzer, contact a Fiat Dealership.

The system can be reactivated using the Setup Menu.

red

Warning lights on

panel

What it means

What to do

When driving normally: stop the vehicle, switch off the engine

and check that the water level in the reservoir is not below the

MIN mark. If it is, wait for the engine to cool down then slowly

and carefully open the cap, top up with coolant and check that

the level is between the MIN and MAX marks on the reservoir.

Also check visually for any fluid leaks. If, when restarting, the

ENGINE COOLANT TEMPERATURE TOO HIGH

When the key is turned to MAR, the warning light warning light switches on again, contact a Fiat Dealership.

switches on but it should switch off after a few

seconds. The warning light turns on when the

engine is overheated.

If the vehicle is used under demanding conditions (e.g. in

high-performance driving): slow down and, if the warning light

stays on, stop the vehicle. Wait for 2 or 3 minutes with the

engine running and slightly accelerated to further favour the

coolant circulation. Then stop the engine. Check that the

coolant level is correct as described above.

The display shows the dedicated message.

IMPORTANT Over demanding routes, it is advisable to keep

the engine on and slightly accelerated for a few minutes before

switching it off.

85

Warning lights on

panel

What it means

What to do

LOW BATTERY CHARGE

The warning light comes on when the ignition key

is turned to MAR, but it should go out as soon as If the warning light stays on, contact a Fiat Dealership

the engine has started (with the engine running at immediately.

idle speed a brief delay before going out is

red

acceptable).

86

Warning lights on

panel

What it means

What to do

LOW ENGINE OIL PRESSURE

When the key is turned to MAR, the digital warning light switches on, but it should

switch off as soon as the engine is started.

12)

The warning light switches on constantly together with the message in the display

when the system detects that the engine oil pressure is insufficient.

Contact a Fiat Dealership as

soon as possible.

50) 51)

ENGINE OIL DETERIORATED

Remember that the

(MultiJet versions with DPF only)

deterioration of the engine oil

is accelerated by:

The warning light starts to flash together with a message on the display (for

versions/markets, where provided) when the system detects that the engine oil

has deteriorated.

– mainly town use of the

vehicle which makes the DPF

regeneration process more

frequent

red

If the warning light flashes, this does not mean that the vehicle is faulty, but simply

informs the driver that it is now necessary to change the engine oil as a result of

regular vehicle use. If the oil is not changed, when a second deterioration

– use of the vehicle for short

trips, preventing the engine

from reaching operating

temperature

threshold is reached, the

warning light also switches on in the instrument

panel and the engine operation is limited to 3000 rpm.

If the oil is still not changed, when a third deterioration threshold is reached, the

engine is limited to 1500 rpm to avoid damage.

– repeated interruption of the

regeneration process,

signalled by the DPF warning

light coming on.

LOW ENGINE OIL LEVEL

When turning the ignition key to MAR, the warning light turns on but it should go

off after a few seconds.

Restore the correct engine oil

level (see “Checking fluid

levels” in the "Servicing and

maintenance" section).

This warning light appears on the panel when the engine oil level falls below the

minimum recommended value.

red

On certain versions a dedicated message is displayed.

87

Warning lights on

panel

What it means

What to do

INCOMPLETE DOOR LOCKING

On certain versions, the warning light turns on when one or more doors or the

boot are not properly closed.

A buzzer will sound when doors/tailgate are open and the vehicle is moving.

red

WARNING

48) If the

warning light does not switch on when the key is turned to MAR or if it stays on when driving (together with the message on the

display), there may be a fault in the restraint systems; in this case, the airbags or pretensioners may not deploy in the event of an accident

or, in a lower number of cases, they could deploy erroneously. Before continuing, contact a Fiat Dealership to have the system checked

immediately.

49) Failure of the

the restraint systems. Before continuing, contact a Fiat Dealership to have the system checked immediately.

warning light is indicated by the

warning light coming on. In this case, the

warning light may not indicate a fault in

50) Deteriorated engine oil must be replaced as soon as possible after the

warning light comes on, and never more than 500 km after it

first switches on. Failure to observe the above indications may result in severe damage to the engine and invalidate the warranty. Remember

that when this warning light comes on, it does not mean that the level of engine oil is low, so if it flashes you do not need to top up the engine

oil.

51) If the

warning light flashes when driving, contact a Fiat Dealership.

88

WARNING

12) If the

warning light switches on when driving, stop the engine immediately and contact a Fiat Dealership.

Warning lights on

panel

What it means

What to do

INJECTION/EOBD SYSTEM FAILURE

In normal conditions, when the ignition key is turned to MAR the

warning light switches on, but it should switch off as soon as the

engine is started.

13)

The operation of

warning light may be checked by the

traffic police using specific devices. Comply with the laws and

regulations of the country where you are driving.

If the warning light stays on or switches on when driving, it

means that the injection system is not working properly; in

particular, if the warning light comes on constantly, this indicates

a malfunction in the supply/ignition system that could cause

excessive exhaust emissions, a possible loss of performance,

poor driveability and high fuel consumption.

Under these conditions, you may continue

travelling at a moderate speed without

demanding excessive effort from the engine.

Prolonged use of the vehicle with the warning

light on constantly may cause damage.

Contact a Fiat Dealership as soon as possible.

amber

On some versions, the display shows the dedicated message.

The warning light switches off if the malfunction disappears, but

it is still stored by the system.

In this case, it is necessary to release the

accelerator pedal to lower the speed of the

engine until the warning light stops flashing.

Continue the journey at moderate speed, trying

to avoid driving conditions that may cause

further flashing and contact a Fiat Dealership as

soon as possible.

NOTE (for petrol engine only)

If the warning light flashes, it means that the catalytic converter

may be damaged.

89

Warning lights on

panel

What it means

What to do

ABS FAILURE

When the key is turned to MAR, the warning light switches on

but it should switch off after a few seconds.

Drive carefully and contact a Fiat Dealership as

soon as possible.

The warning light switches on to indicate a system fault. In this

case the braking system will work as normal, but without the

extra performance offered by the ABS.

amber

The display shows the dedicated message.

FUEL RESERVE

When the key is turned to MAR, the warning light switches on

but it should switch off after a few seconds. The warning light

switches on when about 9 litres of fuel are left in the tank.

IMPORTANT The warning light will blink to indicate a system

fault. If this is the case, go to a Fiat Dealership to have the

system checked.

The triangle on the left side of the

of the vehicle with the fuel filler.

symbol indicates the side

amber

90

Warning lights on

panel

What it means

What to do

GLOW PLUG PREHEATING/GLOW PLUG PREHEATING

FAILURE

Glow plug preheating

This warning light switches on when the key is turned to

MAR. It will switch off as soon as the glow plugs have

reached a preset temperature.

Start the engine as soon as the warning light switches

off.

IMPORTANT At high ambient temperatures the warning

light may stay on for an extremely short time.

amber

Glow plug preheating failure

The warning light flashes if there is a fault in the

preheating system.

Contact a Fiat Dealership as soon as possible.

On some versions, the display shows the dedicated

message.

Warning lights on

panel

What it means

What to do

WATER IN DIESEL FILTER

When the key is turned to MAR, the warning light

switches on but it should switch off after a few seconds.

The

warning light switches on when there is water in

14)

the diesel filter.

amber

On some versions, the display shows the dedicated

message.

91

Warning lights on

panel

What it means

What to do

VEHICLE PROTECTION SYSTEM FAILURE - FIAT CODE

When the key is turned to MAR the warning light will flash

only once and then switch off.

If, with the ignition key at MAR, the warning light stays on

permanently, this indicates a possible failure (see “Fiat

Code system” in the “Know your vehicle” chapter);

Contact a Fiat Dealership to have all the keys stored in

the memory.

amber

If, with the engine running, the

warning light flashes,

it means that the vehicle is not protected by the engine

immobiliser device.

REAR FOG LIGHTS

The warning light comes on when the rear fog lights are

turned on.

amber

Warning lights on

panel

What it means

What to do

GENERIC FAILURE INDICATION

The warning light turns on in the following circumstances:

Engine oil pressure sensor failure

amber

The failure relating to these lights could be: one or

more blown bulbs, a blown protection fuse or a break

in the electrical connection.

Lights failure (rear fog, direction indicator, reverse,

number plate, side, daytime running)

92

Warning lights on

panel

What it means

Fuel cut-off system failure

What to do

Contact a Fiat Dealership as soon as possible to have

the fault fixed.

Park sensor failure.

Start&Stop system failure

The warning light turns on and flashes to indicate a failure

Before continuing, contact a Fiat Dealership to have

the system checked immediately.

of the

warning light. In this case, the

warning light

may not indicate a fault in the restraint systems.

Warning lights on

panel

What it means

What to do

The warning light does not come on during every DPF

regeneration, but only when driving conditions require

that the driver is notified. The warning light will switch

off if the vehicle remains in motion until regeneration

has been completed. On average, the process lasts

15 minutes.

DPF (PARTICULATE FILTER) CLEANING UNDERWAY

(for versions/markets, where provided)

When the key is turned to MAR, the warning light

switches on but it should switch off after a few seconds.

The warning light switches on constantly to inform the

driver that the DPF system needs to eliminate the trapped

pollutants (particulate) through the regeneration process.

A dedicated message will appear on the display when the

warning light switches on (for versions/markets, where

provided).

The best conditions to complete the regeneration

process are reached by driving the vehicle constantly

at 60 km/h with engine speed above 2000 rpm. When

this warning light comes on, it does not indicate a

vehicle failure and it should not therefore be taken to a

workshop.

amber

15)

52)

93

Warning lights on

panel

What it means

What to do

ESC system failure

On certain versions a dedicated message is displayed.

Flashing of the warning light while driving indicates the

intervention of the ESC system.

If the warning light does not switch off, or stays on

when travelling, contact a Fiat Dealership.

Hill Holder system failure

The warning light will turn on when the Hill Holder system

is faulty.

In this case, contact a Fiat Dealership as soon as

possible.

amber

On certain versions a dedicated message is displayed.

WORN BRAKE PADS

The warning light switches on if the front or rear brake

pads are worn.

Have them replaced as soon as possible.

On certain versions a dedicated message is displayed.

amber

Warning lights on

panel

What it means

What to do

ASR SYSTEM DEACTIVATED

The ASR system can be turned off by pressing the button

ASR OFF.

The warning light switches on to warn the driver that the

system is off.

If the ASR OFF button is pressed again, the warning light

will switch off to inform the driver that the system is on

again.

amber

94

Warning lights on

panel

What it means

What to do

TRACTION PLUS SYSTEM ACTIVATION

The warning light switches on when the Traction Plus

system is activated by pressing the T+ button on the

dashboard.

The LED on the button turns on.

Traction Plus system failure

The warning light switches on together with the LED on

amber

the button and the

Plus system failure.

warning light to indicate a Traction

Contact a Fiat Dealership.

The display will show a specific message.

Warning lights on

panel

What it means

What to do

TPMS

TPMS failure

In this case, contact a Fiat Dealership as soon as

The warning light flashes for about 75 seconds then stays possible.

on constantly when a fault is detected in the TPMS.

Tyre pressure low

The warning light switches on to indicate that the tyre

pressure is lower than the recommended value and/or

that slow pressure loss is occurring. In these

circumstances, optimal tyre duration and fuel

consumption may not be guaranteed.

amber

95

Warning lights on

panel

What it means

PARKING SENSOR FAILURE

What to do

(for versions/markets, where provided)

The warning light turns on when failure is detected in the

parking sensors.

On certain versions the

warning light comes on

amber

instead. In this case, contact a Fiat Dealership.

On certain versions a dedicated message is displayed.

START&STOP SYSTEM FAILURE

(for versions/markets, where provided)

The warning light comes on when a fault is detected in

the Start&Stop system.

On certain versions the

warning light comes on

amber

instead. In this case, contact a Fiat Dealership.

On certain versions a dedicated message is displayed.

WARNING

13) If, when the ignition key is turned to MAR, the warning light does not switch on or if it stays on steadily or flashing when travelling (on

certain versions together with the message on the display), contact a Fiat Dealership as soon as possible.

14) The presence of water in the supply circuit may cause severe damage to the injection system and irregular engine operation. If the

warning light switches on (on some versions together with the dedicated message on the display), contact a Fiat Dealership as soon as

possible to have the system bled. If the above indication occurs immediately after refuelling, water may have entered the tank: turn the engine

off immediately and contact a Fiat Dealership.

15) During regeneration, the fan may be activated.

96

WARNING

52) Always drive at a speed appropriate to the traffic conditions, the weather and traffic regulations. The engine may be stopped if the DPF

light is on; however, repeated interruption of the regeneration process may result in premature deterioration of the engine oil. For this reason,

always wait until the warning light switches off before stopping the engine as described above. It is not advisable to complete DPF

regeneration with the vehicle stationary.

Warning lights on

panel

What it means

DIPPED BEAM HEADLIGHTS

What to do

The warning light switches on when the dipped beam

headlights are turned on.

FOLLOW ME HOME

The warning light switches on (together with a message

shown on the display) when this device is in use (see

"Follow me home device" paragraph in "Exterior lights"

in the "Knowing your vehicle" chapter).

green

LEFT-HAND DIRECTION INDICATOR

The warning light switches on when the direction

indicator control stalk is moved downwards or, together

with the right indicator, when the hazard warning light

button is pressed.

green

RIGHT-HAND DIRECTION INDICATOR

The warning light switches on when the direction

indicator control stalk is moved upwards or, together

with the left indicator, when the hazard warning light

button is pressed.

97

Warning lights on

panel

What it means

What to do

FOG LIGHTS

The warning light comes on when the front fog lights are

turned on.

green

CRUISE CONTROL

(for versions/markets, where provided)

The digital warning light switches on in the display when

the ignition key is turned to MAR, but it should switch

off after a few seconds, if the Cruise Control is

deactivated.

The warning light is lit up on the display by rotating the

green

Cruise Control ring nut to ON or

, depending on the

version. On certain versions a dedicated message is

displayed.

Warning lights on

panel

What it means

What to do

MAIN BEAM HEADLIGHTS

The warning light switches on when the main beam

headlights are turned on.

blue

98

Download User Manual App

KNOWING THE INSTRUMENT PANEL -> TRIP COMPUTER for Your Fiat Doblo Van 2010-2022

Related Topics

KNOWING YOUR CAR

KNOWING THE INSTRUMENT PANEL

Popular Owner Manuals

Latest Owner Manuals