INTERNAL AIR
RECIRCULATION
ACTIVATION
CLIMATE CONTROL
SYSTEM (cooling)
ADDITIONAL HEATER
(for versions/markets, where provided)
Proceed as follows:
This device warms up the passenger
compartment more quickly when it
is very cold and the engine coolant
temperature is low.
Press button E: when the function is
on, the button LED lights up.
turn knob A to the blue section;
turn knob B to the required speed;
It is advisable to switch the internal air
recirculation on while standing in
queues or in tunnels to prevent the
introduction of polluted air. Do not use
the function for a long time, particularly
if there are many passengers on board,
to prevent the windows from misting
up.
turn knob C to
press the and E buttons (button
LEDs on).
;
The additional heater comes on
automatically when the engine is
started, if knob A is turned to the last
red sector and the fan (knob B) is at
least at the first speed level.
Adjusting cooling
Proceed as follows:
The additional heater turns off
automatically after reaching the required
comfort conditions.
turn off internal air recirculation by
pressing button E (button LED off);
IMPORTANT The air recirculation
system makes it possible to reach the
required heating or cooling conditions
faster, depending on the selected
mode. It is not advisable to switch the
internal air recirculation on when it is
rainy/cold or the windows might steam
up, especially if the climate control
system is not turned on.
turn knob A rightwards to increase
the temperature;
IMPORTANT The heater will not turn on
if the battery voltage is too low.
turn knob B leftwards to reduce the
fan speed.
SYSTEM SERVICING
In winter, the climate control system
must be turned on at least once a
month for about 10 minutes. Have the
system inspected at a Fiat Dealership
before the summer.
46
English 