Get GETTING TO KNOW YOUR CAR -> External Lights Guide for Fiat Panda SUV Fourth Generation (2024-2026)

DOOR MIRRORS

EXTERNAL LIGHTS

17)

The left stalk fig. 20 or fig. 21 (where

provided) controls the operation of the

headlights, side lights, dipped beam

headlights, parking lights, main beam

headlights, direction indicators, and

"Follow me home" device.

Manual adjustment

From the inside of the car, operate

lever (A) fig. 18 to adjust the mirror.

F1D0016

WARNING When the heated rear

window is activated, door mirror

defrosting is activated (for versions/

markets, where provided).

F1D0015

F1D1090

Manual folding

When required, fold the mirrors toward

the car interior.

Electric adjustment

(for versions/markets, where provided)

The mirrors can only be adjusted with

the ignition key at MAR.

WARNING While driving , the mirrors

must always be open.

To carry out the adjustment, proceed

as follows:

select the desired mirror (left or right)

using selector (A) fig. 19;

move selector (A) to position (B) and

manipulate it to adjust the left door

mirror;

move selector (A) to position (D)

and manipulate it to adjust the right

door mirror. Once you have finished

the adjustment, return selector (A) to

intermediate locking position (C).

WARNING

17) As the driver's door mirror is curved,

it may slightly alter the perception of

distance.

F1D1091

The exterior lights can only be switched

on when the ignition key is at MAR.

The instrument panel and the various

dashboard controls will come on with

the external lights.

If the sensor is activated but is

malfunctioning, the side lights and

dipped beam headlights are switched

on irrespective of the outside light

level and the sensor failure is indicated

on the display. It is also possible to

deactivate the sensor and switch

on the side lights and dipped beam

headlights.

switch on. The warning light

switches on in the instrument panel.

PARKING LIGHTS

AUTOMATIC LIGHT

CONTROL (AUTOLIGHT)

(Dusk sensor)

The side lights, license plate lights and

parking lights can only be switched on

with ignition key at STOP or removed,

by moving ring (A) to position fig. 20

(for versions/markets, where provided)

This infrared LED sensor, combined

with the rain sensor and located on

the windscreen, detects the variations

in outside brightness depending on

the light sensitivity set with the Setup

Menu: the greater the sensitivity, the

less external light is required to activate

the exterior lights.

fig. 21 (where provided) and then

. The warning light on

the instrument panel turns on.

to position

WARNING The sensor cannot detect

the presence of fog. These lights must

therefore be switched on manually in

these circumstances.

To switch off the parking lights, turn

the ring from the position

to the

position . The warning light on the

instrument panel turns on.

DAYTIME RUNNING

LIGHTS (DRL)

MAIN BEAM HEADLIGHTS

To activate the main beam headlights,

with the ring (A) fig. 20 or fig. 21

Activation

The dusk sensor activates when ring

"Daytime Running Lights"

(for versions/markets, where provided)

18) 19)

(A) is turned to

fig. 21 (where

(where provided) to position

and

provided). In this way the side lights

and dipped beam headlights are

activated automatically according to

the external light level.

the ignition device in the MAR position,

pull the stalk towards the steering

wheel beyond the end of travel click.

With the ignition key in the MAR

position and the ring (A) turned to

The

warning light switches on

fig. 20 or

fig. 21 (where provided),

When the lights are turned on

in the instrument panel. When the

stalk is pulled towards the steering

wheel again, beyond the end of travel

position, the main beam headlights

deactivate, the dipped headlights

the daytime running lights are activated

during the day.

by the sensor, the fog lights (for

versions/markets, where provided)

and the rear fog lights may be turned

on. When the lights are automatically

switched off, the front and rear fog

lights (if activated) are also switched off.

The next time the lights are switched

on automatically, the fog lights must be

reactivated manually (if required).

SIDE LIGHTS / DIPPED

BEAM HEADLIGHTS

With the ignition key turned to MAR,

turn the ring (A) fig. 20 or fig. 21 (where

reactivate and the

switches off.

warning light

provided) to position

. If dipped

beam headlights are activated, the

daytime running lights switch off and

the side lights and dipped headlights

minutes from when the engine is turned

off.

FLASHING THE

HEADLIGHTS

FOG LIGHTS / REAR FOG

LIGHTS

To do this, pull the stalk towards the

steering wheel (unstable position),

regardless of the position of ring (A)

fig. 20 or fig. 21 (where provided). The

warning light switches on in the

instrument panel.

(for versions/markets, where provided)

The fog lights can be activated only

when the dipped beam headlights are

on.

Each time the stalk is moved, the lights

stay on for an extra 30 seconds up to

a maximum of 210 seconds; then the

lights are switched off automatically.

Each time the stalk is operated, the

warning light on the instrument panel

switches on.

To switch on the rear/front fog lights,

press the button (A) fig. 22 with the

ignition device in the MAR position as

follows:

DIRECTION INDICATORS

Bring the stalk to the (stable) position:

upwards: activates the right

direction indicator;

The

warning light comes on when

the stalk is first moved and stays on

until the function is automatically

deactivated. Each time the stalk is

activated it increases the time that the

lights remain on.

first pressing: front fog lights on;

second press: rear fog lights on;

third pressing: front/rear fog lights

off.

downwards: activates the left

direction indicator. Warning light

With front fog lights on, the

warning

will blink on the instrument panel.

The direction indicators switch off

automatically when the steering wheel

is straightened.

Deactivation: keep the stalk pulled

towards the steering wheel for more

than two seconds.

light on the instrument panel will come

on at the same time.

With rear fog lights on, the

warning

light on the instrument panel will come

on at the same time.

REAR FOG LIGHTS

To switch on the rear fog lights, press

"Lane Change" function

If you wish to signal a lane change,

place the left stalk in the unstable

position for less than half a second.

The direction indicator on the side

selected will be activated for 5 flashes

and then go out automatically.

To switch off the front/rear fog lights,

switch off the dipped beam headlights

or turn the ignition device to the STOP

position.

the button with the ignition device in

the MAR position.

The rear fog lights can only be

switched on when the dipped beam

headlights are on.

With rear fog lights on, the

light on the instrument panel will come

on at the same time. To switch off the

warning

"FOLLOW ME HOME"

DEVICE

This allows the space in front of the car

to be lit for a set time.

rear fog lights, press the button

switch off the dipped beam headlights

or turn the ignition device to the STOP

position.

Activation: with the ignition key at

STOP or removed, pull the stalk

towards the steering wheel within 2

GETTING TO KNOW YOUR CAR -> External Lights for Your Fiat Panda SUV Fourth Generation (2024-2026)

Related Topics

GETTING TO KNOW YOUR CAR

Popular Owner Manuals

Latest Owner Manuals