Convenient features -> High Beam Assist (HBA) for Your Hyundai I20 4 Door 2021-2026

05  
+,*+ꢀ%($0ꢀ$66,67ꢀǣ+%$Ǥꢀǣ,)ꢀ(48,33('Ǥ  
)XQFWLRQꢀVHWWLQJ  
The driver can activate HBA by placing  
the ignition switch to the ON position  
and by selecting: ‘User Settings  
Lights ꢀ+%$ꢀꢁ+LJKꢀ%HDPꢀ$VVLVWꢂŔꢃꢀ,Iꢀ\RXꢀ  
disable this setting, HBA will not work.  
The setting of HBA will be maintained, as  
selected, when the engine is re-started.  
OPDE046057  
Operating condition  
High Beam Assist is a system that  
automatically adjusts the headlight  
range (switches between high beam and  
low beam) according to the brightness  
of other vehicles and road conditions.  
1. Place the light switch in the AUTO  
position.  
2. Turn on the high beam by pushing the  
lever away from you.  
3. High Beam Assist ( ) indicator will  
illuminate.  
4.High Beam Assist will turn on when  
vehicle speed is above 25 mph (40  
km/h).  
Detecting sensor  
(Front view camera)  
OBC3070001  
[1] : Front view camera  
The front view camera is used as a  
detecting sensor to detect ambient light  
and brightness whilst driving.  
Refer to the picture above for the  
detailed location of the detecting sensor.  
NOTICE  
good condition to maintain optimal  
performance of High Beam Assist.  
)RUꢀPRUHꢀGHWDLOVꢀRQꢀWKHꢀSUHFDXWLRQVꢀ  
of the front view camera, refer to  
ŕ)RUZDUGꢀ&ROOLVLRQꢁ$YRLGDQFHꢀ$VVLVWꢀ  
ꢂ)&$ꢃŖꢀVHFWLRQꢀLQꢀFKDSWHUꢀꢄꢅꢀ  
5-49  
Convenient features  
- If the light switch is pushed away  
when High Beam Assist is operating,  
High Beam Assist will turn off.  
- If the light switch is pulled towards  
you when the high beam is off, the  
high beam will turn on. When you let  
go of the light switch, the lever will  
move to the middle and the high beam  
will turn off.  
System malfunction and  
limitations  
System malfunction  
- If the light switch is pulled towards  
you when the high beam is on by High  
Beam Assist, and High Beam Assist  
will turn off.  
- If the light switch is placed to the  
headlight position ( ), High Beam  
Assist will turn off and the low beam  
will be on continuously.  
OTM050218L  
When High Beam Assist is not working  
properly, the warning message will come  
on for a few seconds. After the message  
disappears, the master warning light  
When High Beam Assist is operating, the  
high beam switches to low beam in the  
following conditions.  
- When the headlight of an on-coming  
vehicle is detected.  
- When the tail light of a vehicle in front  
is detected.  
- When the headlight or tail light of a  
motorcycle or a bicycle is detected.  
- When the surrounding ambient light is  
bright enough that high beams are not  
required.  
- When streetlights or other lights are  
detected.  
- When the light switch is not in the  
AUTO position.  
- When High Beam Assist is off.  
(
) will illuminate.  
We recommend that you take your  
vehicle to a HYUNDAI authorised  
repairer and have the system checked.  
CAUTION  
The system may not operate normally if  
any of the following conditions should  
occur:  
1. When the illumination from an  
on-coming vehicle or a vehicle in  
front is dim. Such examples may  
include:  
śꢀ When the headlights of an oncoming  
vehicle or the tail lights of a vehicle  
in front is covered with dust, snow,  
or water  
śꢀ When the headlights on an  
RQꢁFRPLQJꢀYHKLFOHꢀDUHꢀ2))ꢆꢀEXWꢀWKHꢀ  
fog lights are ON)  
- When the vehicle speed is below 19  
mph (30 km/h).  
5-50  
05  
2. When the front view camera is  
adversely affected by an external  
condition. Such examples may  
include:  
śꢀ When the vehicle’s headlights have  
been damaged or not repaired  
properly  
śꢀ When the vehicle headlights are not  
aimed properly  
śꢀ When the vehicle is driven on a  
narrow curved road or rough road  
śꢀ When the vehicle is driven on an  
uphill road or downhill road  
śꢀ When only part of the vehicle in front  
is visible on a crossroad or curved  
road  
śꢀ When there is a traffic light,  
reflecting sign, flashing sign or mirror  
śꢀ When the road conditions are bad  
such as being wet or covered with  
snow  
WARNING  
śꢀ 7KHꢀIXQFWLRQꢀPD\ꢀQRWꢀZRUNꢀDURXQGꢀꢇꢈꢀ  
seconds after starting the vehicle or  
the initialization or rebooting of the  
front view camera.  
śꢀ 'RꢀQRWꢀDWWHPSWꢀWRꢀGLVDVVHPEOHꢀ  
the front view camera without the  
assistance of a HYUNDAI authorised  
repairer technician.  
If the front view camera is removed  
for any reason, the system may need  
to be re-calibrated. We recommend  
that the system be inspected by a  
HYUNDAI authorised repairer.  
śꢀ ,IꢀWKHꢀZLQGVFUHHQꢀRIꢀ\RXUꢀYHKLFOHꢀ  
is replaced, most likely the front  
view camera will need to be  
re-calibrated. If this occurs, have  
your vehicle inspected and have the  
system re-calibrated by a HYUNDAI  
authorised repairer.  
śꢀ %HꢀFDUHIXOꢀWKDWꢀZDWHUꢀGRHVQŔWꢀJHWꢀLQWRꢀ  
front view camera unit and do not  
remove or damage related parts of  
High Beam Assist system.  
śꢀ 'RꢀQRWꢀSODFHꢀREMHFWVꢀRQꢀWKHꢀFUDVKꢀ  
pad that reflect light such as mirrors,  
white paper, etc. The system may  
malfunction if sunlight is reflected.  
śꢀ $WꢀWLPHVꢆꢀ+LJKꢀ%HDPꢀ$VVLVWꢀPD\ꢀ  
not work properly. The system is  
for your convenience only. It is the  
responsibility of the driver for safe  
driving practices and always check  
the road conditions for your safety.  
śꢀ When a vehicle suddenly appears  
from a curve  
śꢀ When the vehicle is tilted from a flat  
tyre or being towed  
śꢀ :KHQꢀ/DQHꢀ.HHSLQJꢀ$VVLVWꢀV\VWHPꢀ  
warning light illuminates  
śꢀ When the light from the oncoming or  
front vehicle is not detected because  
of exhaust fume, smoke, fog, snow,  
etc.  
śꢀ When the front window is covered  
with foreign matters such as ice,  
dust, fog, or is damaged  
3. When the forward visibility is poor.  
Such examples may include:  
śꢀ When the headlights of an oncoming  
vehicle or a vehicle in front is not  
detected due to poor outside  
visibility (smog, smoke, dust, fog,  
heavy rain, snow, etc.)  
śꢀ :KHQꢀWKHꢀV\VWHPꢀGRHVꢀQRWꢀRSHUDWHꢀ  
normally, change the light position  
manually between the high beam and  
low beam.  
śꢀ When the windscreen visibility is  
poor  
5-51