Convenient features -> Manual heating and air conditioning for Your Hyundai I20 4 Door 2021-2026

Convenient features  
Manual heating and air conditioning  
The heating and cooling system can be controlled manually by pushing buttons other  
than the AUTO button. In this case, the system works sequentially according to the  
order of buttons selected. When pressing any button except the AUTO button whilst  
using automatic operation, the functions not selected will be controlled automatically.  
1. Start the engine.  
2. Set the mode to the desired position.  
To improve the effectiveness of heating and cooling, select the mode according to  
the following:  
- Heating :  
- Cooling :  
3. Set the temperature control to the desired position.  
4.Set the air intake control to fresh mode.  
5. Set the fan speed control to the desired speed.  
6.If air conditioning is desired, turn the air conditioning system on.  
7. Press the AUTO button in order to convert to full automatic control of the system.  
Mode selection  
OBC3050102R  
5-68  
05  
OBC3050113R  
OBC3050112R  
'HIURVWꢀ/HYHOꢁꢂ$ꢃꢁ'ꢄ  
Most of the air flow is directed to the  
windscreen with a small amount of air  
The mode selection button controls the  
direction of the air flow through the  
ventilation system.  
directed to the side window defrosters.  
)DFHꢀ/HYHOꢁꢂ%ꢃꢁ'ꢄ  
Air flow is directed toward the upper  
body and face. Additionally, each outlet  
can be controlled to direct the air  
discharged from the outlet.  
)ORRUꢀ/HYHOꢁꢂ$ꢃꢁ&ꢃꢁ'ꢄ  
OBC3N051101AU  
Most of the air flow is directed to the  
floor, with a small amount of the air  
being directed to the windscreen and  
side window defrosters.  
,QVWUXPHQWꢁSDQHOꢁYHQWVꢁ  
The instrument panel vent air flow can  
be directed up/down or left/right using  
the vent adjustment lever.  
To close the vent adjustment lever,  
rotate it to the outer side till the end. To  
open the vent, rotate it to the inner side.  
)ORRUꢁ ꢁ'HIURVWꢁꢂ$ꢃꢁ&ꢃꢁ'ꢄ  
Most of the air flow is directed to the  
floor and the windscreen with a small  
amount directed to the side window  
defrosters.  
5-69  
Convenient features  
Temperature control  
Air intake control  
OBC3050111R  
OBC3050114R  
The temperature will increase by  
pushing the switch to up.  
This is used to select the outside (fresh)  
air position or recirculated air position.  
The temperature will decrease by  
pushing the switch to down.  
To change the air intake control position,  
push the control button.  
The temperature will increase or  
decrease by 0.5°C (1°F) for each  
incremental location. When set to the  
lowest temperature setting, the air  
conditioning will operate continuously.  
5HFLUFXODWHGꢁDLUꢁSRVLWLRQ  
With the recirculated air  
position selected, air from  
the passenger  
compartment will be  
drawn through the heating  
system and heated or  
cooled according to the  
function selected.  
7HPSHUDWXUHꢁFRQYHUVLRQ  
If the battery has been discharged or  
disconnected, the temperature mode  
display will reset to Centigrade.  
To change the temperature unit from °C  
to °F or °F to °C :  
2XWVLGHꢁꢂIUHVKꢄꢁDLUꢁSRVLWLRQꢁꢁ  
- Automatic climate control system  
Press the AUTO button for 3 seconds  
whilst pressing the OFF button.  
- Instrument cluster  
Go to User Settings o Units o  
Temperature Unit.  
With the outside (fresh) air  
position selected, air  
enters the vehicle from  
outside and is heated or  
cooled according to the  
function selected.  
The temperature unit on both the cluster  
LCD display and the climate control  
screen will change.  
5-70  
05  
Fan speed control  
Information  
i
2SHUDWLQJꢁWKHꢁV\VWHPꢁSULPDULO\ꢁLQꢁ)UHVKꢁ  
PRGHꢁLVꢁUHFRPPHQGHGꢅꢁ8VHꢁ5HFLUFXODWLRQꢁ  
mode temporarily only when needed.  
Prolonged operation of the heater in  
5HFLUFXODWLRQꢁPRGHꢁDQGꢁZLWKRXWꢁWKHꢁ$ꢆ&ꢁ  
21ꢁFDQꢁFDXVHꢁIRJJLQJꢁRIꢁWKHꢁZLQGVFUHHQꢅ  
,QꢁDGGLWLRQꢃꢁSURORQJHGꢁXVHꢁRIꢁWKHꢁ$ꢆ&ꢁ  
21ꢁLQꢁ5HFLUFXODWLRQꢁPRGHꢁPD\ꢁUHVXOWꢁLQꢁ  
excessively dry, dehumidified air in the  
cabin and may promote formation of  
musty vent odor due to stagnant air.  
OBC3050115R  
Push the switch to up to increase the fan  
speed and airflow. Push the switch to  
down to decrease fan speed and airflow.  
WARNING  
śꢀ Continued use of the climate control  
system operation in Recirculation  
mode for a prolonged period of  
time may cause drowsiness to the  
occupants in the cabin. This may lead  
to loss of vehicle control which may  
lead to an accident.  
śꢀ Continued use of the climate control  
system operation in Recirculation  
PRGHꢀZLWKꢀWKHꢀ$ꢁ&ꢀ2))ꢀPD\ꢀDOORZꢀ  
humidity to increase inside the cabin.  
NOTICE  
Operating the fan speed when the  
ignition switch is in the ON position  
could cause the battery to discharge.  
Operate the fan speed when the engine  
is running.  
This may cause condensation to  
accumulate on the windscreen and  
obscure visibility.  
śꢀ Do not sleep in your vehicle or  
remain parked in your vehicle with  
the windows up and either the  
heater or the air conditioning ON for  
prolonged periods of time. Doing so  
may increase the levels of carbon  
dioxide in the cabin which may lead  
to serious injury or death.  
5-71