Driving your vehicle
Using the clutch (if equipped)
The clutch pedal should be depressed all
the way to the floor before:
- Starting the engine
The engine will not start without
depressing the clutch pedal.
Downshifting
Downshift when you must slow down in
heavy traffic or drive up a steep hill to
prevent engine load.
Also, downshifting reduces the chance
of stalling and can accelerate when you
need to increase your speed again.
When the vehicle is going downhill,
downshifting helps maintain safe speed
by providing brake power from the
engine and enables less wear on the
brakes.
- Shifting
To start your vehicle, slowly release
the clutch pedal and depress the
accelerator.
When releasing the clutch pedal, release
it slowly. The clutch pedal should always
be released whilst driving.
NOTICE
To prevent damage to the engine,
clutch and transmission:
NOTICE
To prevent unnecessary wear or
damage to the clutch:
śꢀ Do not rest your foot on the clutch
pedal whilst driving.
śꢀ Do not hold the vehicle with the
clutch on an incline, whilst waiting
for the traffic light, etc.
śꢀ Always depress the clutch pedal
down fully to prevent noise or
damage.
śꢀ Do not start with the 2nd (second)
gear engaged except when you start
on a slippery road.
śꢀ When downshifting the 5th gear
to the 4th gear, be careful not to
inadvertently push the shift lever
sideways engaging the 2nd gear.
A drastic downshift may cause the
engine speed to increase to the point
the tachometer will enter the red-
zone.
śꢀ Do not downshift more than two
gear at a time or downshift the gear
when the engine is running at high
speed (5,000 RPM or higher). Such
a downshifting may damage the
engine, clutch and the transmission.
śꢀ Depress the clutch pedal all the way
and be careful not to depress the
pedal again before returning to the
upright position after you release
the pedal. If you depress the pedal
before returning to the original
position repeatedly, it may cause the
clutch system failure.
6-14
English 
