2016-2026 Hyundai I30 4 Door Features of your vehicle -> Audio system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Features of your vehicle -> Audio system for Your Hyundai I30 4 Door Third Generation (2016-2026)

Features of your vehicle  
AUDIO SYSTEM  
Type A  
✽
NOTICE  
CAUTION  
If you install an aftermarket HID head  
lamp, your vehicle’s audio and electron-  
ic device may malfunction.  
• Before entering a place with a low  
height clearance or a car wash,  
remove surely the antenna by  
rotating it counter-clockwise. If  
not, the antenna may be dam-  
aged.  
• When reinstalling your antenna, it  
is important that it is fully tight-  
ened to ensure proper reception.  
The antenna may be removed  
when parking the vehicle or when  
loading cargo on the roof rack.  
OED036069  
Type B  
• When cargo is loaded on the roof  
rack, do not place the cargo near  
the antenna pole to ensure proper  
reception.  
OFD047224  
Antenna  
D300102AFD-EA  
Roof antenna  
Your car uses a roof antenna to receive  
both AM and FM broadcast signals. This  
antenna is a removable type. To remove  
the antenna, turn it counterclockwise. To  
install the antenna, turn it clockwise.  
4 101  
Features of your vehicle  
If the SEEK button is pressed for less  
than 0.8 second, it will work as follows in  
each mode.  
VOL (▲/▼) (1)  
• Press the up button (▲) to increase  
volume.  
• Press the down button (▼) to decease  
volume.  
RADIO mode  
It will function as the PRESET STATION  
select buttons.  
MODE (2)  
Press the button to select Radio, Tape (if  
equipped) or CD (compact disc).  
CDP mode  
It will function as the TRACK UP/DOWN  
button.  
SEEK (▲/▼) (3)  
OFD047214  
If the SEEK button is pressed for 0.8 sec-  
ond or more, it will work as follows in  
each mode.  
CDC mode  
D300200AFD  
It will function as the TRACK UP/DOWN  
button.  
Audio remote control  
(if equipped)  
The steering wheel audio remote control  
button is installed to promote safe driv-  
ing.  
RADIO mode  
It will function as the AUTO SEEK select  
button.  
Detailed information for audio control  
buttons is described in the following  
pages in this section.  
CDP mode  
CAUTION  
Do not operate audio remote con-  
trol buttons simultaneously.  
It will function as the FF/REW button.  
CDC mode  
It will function as the DISC UP/DOWN  
button.  
4 102  
Features of your vehicle  
FM reception  
AM reception  
FM radio station  
JBM001  
JBM002  
JBM003  
D300800AFD-EA  
AM broadcasts can be received at  
greater distances than FM broadcasts.  
This is because AM radio waves are  
transmitted at low frequencies. These  
long, low frequency radio waves can fol-  
low the curvature of the earth rather than  
travelling straight out into the atmos-  
phere. In addition, they curve around  
obstructions so that they can provide bet-  
ter signal coverage.  
FM broadcasts are transmitted at high  
frequencies and do not bend to follow the  
earth's surface. Because of this, FM  
broadcasts generally begin to fade at  
short distances from the station. Also,  
FM signals are easily affected by build-  
ings, mountains, or other obstructions.  
These can result in certain listening con-  
ditions which might lead you to believe a  
problem exists with your radio. The fol-  
lowing conditions are normal and do not  
indicate radio trouble:  
How car audio works  
AM and FM radio signals are broadcast  
from transmitter towers located around  
your city. They are intercepted by the  
radio antenna on your car. This signal is  
then received by the radio and sent to  
your car speakers.  
When a strong radio signal has reached  
your vehicle, the precise engineering of  
your audio system ensures the best pos-  
sible quality reproduction. However, in  
some cases the signal coming to your  
vehicle may not be strong and clear. This  
can be due to factors such as the dis-  
tance from the radio station, closeness of  
other strong radio stations or the pres-  
ence of buildings, bridges or other large  
obstructions in the area.  
4 103  
Features of your vehicle  
Using a mobile phone or a two-  
way radio  
When a mobile phone is used inside the  
vehicle, noise may be produced from the  
audio equipment. This does not mean  
that something is wrong with the audio  
equipment. In such a case, use the  
mobile phone at a place as far as possi-  
ble from the audio equipment.  
CAUTION  
JBM004  
JBM005  
When using a communication sys-  
tem such a mobile phone or a radio  
set inside the vehicle, a separate  
external antenna must be fitted.  
When a mobile phone or a radio set  
is used with an internal antenna  
alone, it may interfere with the vehi-  
cle's electrical system and adverse-  
ly affect safe operation of the vehi-  
cle.  
• Fading - As your car moves away from  
the radio station, the signal will weaken  
and sound will begin to fade. When this  
occurs, we suggest that you select  
another stronger station.  
• Flutter/Static - Weak FM signals or  
large obstructions between the trans-  
mitter and your radio can disturb the  
signal causing static or fluttering nois-  
es to occur. Reducing the treble level  
may lessen this effect until the distur-  
bance clears.  
• Station Swapping - As a FM signal  
weakens, another more powerful sig-  
nal near the same frequency may  
begin to play. This is because your  
radio is designed to lock onto the clear-  
est signal. If this occurs, select anoth-  
er station with a stronger signal.  
• Multi-Path Cancellation - Radio signals  
being received from several directions  
can cause distortion or fluttering. This  
can be caused by a direct and reflect-  
ed signal from the same station, or by  
signals from two stations with close  
frequencies. If this occurs, select  
another station until the condition has  
passed.  
WARNING  
Don't use a mobile phone when you  
are driving.You must stop at a safe  
place to use a mobile phone.  
4 104  
Features of your vehicle  
• Depending on the type of CD-R/CD-  
RW CDs, certain CDs may not operate  
normally according to manufacturing  
companies or making and recording  
methods. In such circumstances, if you  
still continue to use those CDs, they  
may cause the malfunction of your car  
audio system.  
Care of cassette tapes  
(if equipped)  
Care of disc (if equipped)  
• If the temperature inside the car is too  
high, open the car windows for ventilation  
before using your car audio.  
• It is illegal to copy and use  
MP3/WMA/AAC/WAVE files without  
permission. Use CDs that are created  
only by lawful means.  
• Because the thickness of a cassette  
tape with the total playback time of  
over 60 minutes (C-60) are too thin, we  
suggest that you do not use any of  
them to avoid having tapes being tan-  
gled.  
• To achieve better sound quality, period-  
ically clean the tape head using a cot-  
ton stick with colourless alcohol (once  
per month).  
• Do not apply volatile agents such as  
benzene and thinner, normal cleaners  
and magnetic sprays made for ana-  
logue disc onto CDs.  
✽
NOTICE - Playing an  
Incompatible Copy-Protected  
Audio CD  
Some copy protected CDs, which do not  
comply with the international audio CD  
standards (Red Book), may not play on  
your car audio. Please note that if you  
try to play copy protected CDs and the  
CD player does not perform correctly  
the CDs maybe defective, not the CD  
player.  
• If a tape is too loose, fasten it to reel by  
winding with objects like a pencil.  
• Because dust or foreign objects on a  
cassette tape may damage the play-  
back head, always store tapes in their  
cases when not in use.  
• Make sure cassette tapes are kept  
away from magnetic devices (TV,  
stereo system, etc) in order to achieve  
better sound quality.  
• To prevent the disc surface from get-  
ting damaged. Hold and carry CDs by  
the edges or the edges of the centre  
hole only.  
• Clean the disc surface with a piece of  
soft cloth before playback (wipe it from  
the centre to the outside edge).  
• Do not damage the disc surface or  
attach pieces of sticky tape or paper  
onto it.  
• Make sure on undesirable matter other  
than CDs are inserted into the CD  
player (Do not insert more than one  
CD at a time).  
•
Be certain that no objects or substances  
other than cassette tapes are inserted  
into the cassette tape player.  
• Because tape media can be distorted  
when exposed to direct sunlight, do not  
leave cassette tapes on the seats,  
dashboard or near the back wind-  
shield.  
• Keep CDs in their cases after use to  
protect them from scratches or dirt.  
4 105  
Features of your vehicle  
RADIO, VOLUME CONTROL (SA710) (IF EQUIPPED)  
1. FM/AM Selection Button  
2. Power ON/OFF & VOLUME Control  
Button  
3. AUTO STORE Button  
4. Automatic Channel Selection Button  
5. TUNE/AUDIO Control Button  
6. Preset Button  
7. CD/AUX Selection Button  
A-100FD  
4 106  
Features of your vehicle  
Type B  
1. FM/AM Selection Button  
4. Automatic Channel Selection  
Button  
Turns to AUDIO CONTROL mode, and  
toggles in the order of BASS➟MIDDLE➟  
TREBLE➟FADER➟BALANCE➟AVC➟  
P.BASS➟BASS··· when the button is  
pressed each time.  
Turns to FM/AM mode and toggles FM1  
and FM2➟AM➟FM1··· when the button is  
pressed each time.  
• When the [SEEK  
] button is pressed,  
it reduces the band frequency by 5kHz  
to automatically select channel. Stops  
at the previous frequency if no channel  
is found.  
2. Power ON/OFF & Volume  
Control Button  
Turns on/off the set when the IGNITION  
SWITCH is on ACC or ON.  
If the button is turned to the right, it  
increases the volume and left, decreases  
the volume.  
• When the [SEEK  
] button is pressed,  
6. Preset Button  
Push [1]~[6]button less than 0.8 second  
to play the channel saved in each button.  
Push preset button for 0.8 second or  
longer to save current channel to the  
respective button with a beep.  
it increases the band frequency by  
5kHz to automatically select channel.  
Stops at the previous frequency if no  
channel is found.  
5. TUNE/AUDIO Control Button  
3. AUTO STORE Button  
Turn this button clockwise by one notch  
to increase frequency by 0.05MHz from  
current frequency.  
Turn this button counterclockwise by one  
notch to decrease frequency by 0.05MHz  
from current frequency.  
7. CD/AUX Selection Button  
When the button is pressed, it automati-  
cally selects and saves channels with  
high reception rate to PRESET but-  
tons(1~6) and plays the channel saved in  
PRESET1.  
If no channel is saved after AST, it will  
play the previous channel.  
If there is a CD in the CDP DECK it turns  
to CD mode, and if a device is connected  
to AUX then it toggles.  
CD➟AUX➟CD··· when the button is  
pressed each time.(It will not turn to AUX  
if the auxiliary device is not connected.)  
Type A  
Turns to AUDIO CONTROL mode, and  
toggles in the order of BASS➟MIDDLE  
➟TREBLE➟FADER➟BALANCE➟AVC  
ON➟···BASS··· when the button is  
pressed each time.  
4 107  
Features of your vehicle  
CD (SA710) (IF EQUIPPED)  
1. CD loading slot  
2. CD Eject Button  
3. AUX Selection Button  
4. SCAN Play Button  
5. Automatic Track Selection Button  
6. CD Indicator  
7. REPEAT Button  
8. RANDOM Play Button  
A-100FD  
4 108  
Features of your vehicle  
1. CD loading slot  
4. SCAN Play Button  
6. CD Indicator  
Please face printed side upward and  
gently push in.  
When the ignition switch is on ACC or  
ON and power is OFF, power is automat-  
ically turned on if the CD is loaded.  
Play first 10 seconds of each song in the  
DISC.  
To cancel the mode, press the key once  
again.  
When car ignition switch is ACC or ON  
and if the CD is loaded, this indicator is  
lighted.  
If the CD is ejected the light is turned off.  
This CDP supports both 8cm and 12cm  
CDs. But if VCD, Data CD, MP3 CD are  
loaded, "Disc-Err" message will appear  
and CD will be ejected.  
5. Automatic Track Selection  
Button  
7. REPEAT Button  
Repeats current song when the button is  
pressed for less than 0.8 second.  
Repeats the entire DISC when the button  
is pressed for 0.8 second or longer.  
• Push [SEEK  
] button for less than  
0.8 second to play from the beginning  
of current song.  
2. CD Eject Button  
• Push [SEEK  
] button for less than  
Push  
button to eject the CD during  
0.8 second and press again within 1  
second to play the previous song.  
8. RANDOM Play Button  
CD playback.  
This button is enabled when ignition  
switch is off.  
Turns ON/OFF the randomization of the  
play list of files in the currently played  
DISC.  
To cancel the mode, press the key once  
again.  
• Push [SEEK  
] button for 0.8 second  
or longer to initiate reverse direction  
high speed sound search of current  
song.  
3. AUX Selection Button  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
• Push [SEEK  
0.8 second to play the next song.  
• Push [SEEK ] button for less than  
] button for less than  
If no Disc and auxiliary device is con-  
nected, it displays "NO Media" for 5 sec-  
onds and returns to the previous mode.  
0.8 second or longer to initiate high  
speed sound search of current song.  
4 109  
Features of your vehicle  
RADIO, SET UP, VOLUME CONTROL (PA710) (IF EQUIPPED)  
1. FM Selection Button  
2. AM Selection Button  
3. CD Selection Button  
4. AUX Selection Button  
5. Automatic Channel Selection Button  
6. Power ON/OFF & VOLUME Control Button  
7. AUTO STORE Button  
8. Screen ON/ OFF Button  
9. Information Display Button  
10. SET UP Button  
11. TUNE/ENTER Button  
12. Preset Button  
A-200FDD  
4 110  
Features of your vehicle  
1. FM Selection Button  
5. Automatic Channel Selection  
Button  
7. AUTO STORE Button  
Turns to FM mode and toggles FM1 and  
FM2 when the button is pressed each  
time.  
When the button is pressed, it automati-  
cally selects and saves channels with  
high reception rate to PRESET buttons  
(1~6) and plays the channel saved in  
PRESET1.  
If no channel is saved after AST, it will  
play the previous channel.  
• When the [SEEK  
]button is pressed,  
it reduces the band frequency by  
100khz to automatically select chan-  
nel. Stops at the previous frequency if  
no channel is found.  
2. AM Selection Button  
Turns to AM mode, and toggles in the  
order of AM1➟AM2➟AM1··· when the  
button is pressed each time.  
• When the [SEEK  
]button is pressed,  
it increases the band frequency by  
100khz to automatically select channel.  
Stops at the previous frequency if no  
channel is found.  
8. Screen ON/ OFF Button  
Turns off/on the displayed data and light  
on LCD.  
The screen and light will be turned on by  
pressing any button except DARK button  
when the screen is turned off.  
3. CD Selection Button  
If there is a cd in the CDP DECK it plays  
the CD.  
Press CD button to automatically insert  
CD when the disc is ejected from the  
deck by pressing CD EJECT.  
6. Power ON/OFF & Volume  
Control Button  
• Turns on/off the set when the IGNI-  
TION SWITCH is on ACC or ON. If the  
button is turned to the right, it increas-  
es the volume and left, decreases the  
volume.  
• In AUX mode, the volume and tone  
(BASS, MID, TRE) are adjusted in a  
separate way.  
If you pull out AUX from a jack and  
insert it again, then only volume goes  
back to step 10.  
9. Information Display Button  
Type A  
Displays the information of the channel  
currently played by RDS.  
4. AUX Selection Button  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
If no Disc and auxiliary device is connected,  
it displays “NO Media” for 5 seconds and  
returns to the previous mode.  
Type B  
Displays the information of the channel  
currently played.  
4 111  
Features of your vehicle  
10. SET UP Button  
11. TUNE/ENTER Button  
Press this button to turn to the SOUND,  
clock setting, time display, SCROLL,  
SDVC, temperature display and adjust-  
ment mode.  
If no action is taken for 5 seconds after  
pressing the button, it will return to the  
play mode.(After entering SET UP mode,  
move between items using the left, right  
and PUSH functions of the TUNE button.)  
Turn this button clockwise by one notch  
to increase frequency by 0.05Mhz from  
current frequency.  
Turn this button counterclockwise by one  
notch to decrease frequency by 0.05Mhz  
from current frequency.  
Press this button while holding SET UP  
button to activate / inactivate the item to.  
Select SET UP item using left and right  
function of the Tune button.  
Type A  
The set up item changes from SOUND  
➟CLOCK➟TIME➟SCROLL➟SDVC➟TE  
MP➟SOUND...  
12. Preset Button  
Push [1]~[6] buttons less than 0.8 second  
to play the channel saved in each button.  
Push preset button for 0.8 second or  
longer to save current channel to the  
respective button with a beep.  
Type B  
The set up item changes from AUDIO➟  
CLOCK➟TIME➟SCROLL➟SDVC➟TEMP  
➟P.BASS➟AUDIO  
4 112  
Features of your vehicle  
CD (PA710) (IF EQUIPPED)  
1. CD loading slot  
2. CD indicator  
3. CD Eject Button  
4. AUX Selection Button  
5. Automatic Track Selection Button  
6. INFO Button  
7. TUNE/ENTER Button  
8. REPEAT Button  
9. RANDOM Play Button  
10. SCAN Play Button  
11. FOLDER Moving Button  
A-200FDD  
4 113  
Features of your vehicle  
1. CD loading slot  
5. Automatic Track Selection  
Button  
7. TUNE/ENTER Button  
Turn this button clockwise to display  
songs after current song.  
Also, turn this button counterclockwise to  
display songs before current song.  
To listen to the displayed song, press the  
button to skip to the song and play.  
Please face printed side upward and  
gently push in. When the ignition switch  
is on ACC or ON and power is off, power  
is automatically turned on if the CD is  
loaded.This CDP supports both 8cm and  
12 cm CDs. But if VCD, Data CD, MP3  
CD are loaded, "Er-6" message will  
appear and CD will be ejected.  
• Push [SEEK  
] button for less than  
0.8 second to play from the beginning  
of current song.  
• Push [SEEK  
] button for less than  
0.8 second and press again within 1  
second to play the previous song.  
8. REPEAT Button  
Repeats current song when the button is  
pressed for less than 0.8 second.  
Repeats the entire DISC when the button  
is pressed for 0.8 second or longer.  
• Push [SEEK  
] button for 0.8 second  
or longer to initiate reverse direction  
high speed sound search of current  
song.  
2. CD Indicator  
When car ignition switch is ACC or ON  
and if the CD is loaded, this indicator is  
lighted. If the CD is ejected the light is  
turned off.  
• Push [SEEK  
0.8 second to play the next song.  
• Push [SEEK ] button for 0.8 second  
] button for less than  
9. RANDOM Play Button  
Turns on/off the randomization of the  
play list of files in the currently played  
DISC.  
To cancel the mode, press the key once  
again.  
or longer to initiate high speed sound  
search of current song.  
3. CD eject Button  
Push  
button to eject the CD during CD  
playback. This button is enabled when  
ignition switch is off.  
6. INFO Button  
Displays the information of the current  
CD TRACK in the order of DISC  
TITLE➟DISC ARTIST➟TRACK TITLE➟  
TRACK ARTIST➟TOTAL TRACK➟ Play  
Screen➟DISC TITLE➟···.(not displayed if  
the information is not available on the  
DISC.)  
(If MP3 is displayed FILE NAME ➟TITLE  
➟ARTIST➟ALBUM➟FOLDER➟TOTAL  
FILE➟FILE NAME➟···)  
10. SCAN Play Button  
Plays first 10 seconds of each song in  
the DISC.  
To cancel the mode, press the key once  
again.  
4. AUX Selection Button  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
If no Disc and auxiliary device is connected,  
it displays "NO Media" for 5 seconds and  
returns to the previous mode.  
4 114  
Features of your vehicle  
11. FOLDER Moving Button  
• Moves [FLDR  
] button child folder of  
the current folder and displays the first  
song in the folder. Press TUNE/ENTER  
button to move to the folder displayed.  
It will play the first song in the folder.  
• Moves [FLDR  
] button parent folder  
and displays the first song in the folder.  
Press TUNE/ENTER button to move to  
the folder displayed. It will play the first  
song in the folder.  
4 115  
Features of your vehicle  
USING USB (PA710) (IF EQUIPPED)  
1. AUX Selection Button  
2. Track moving Button  
3. INFO Selection Button  
4. Folder moving Button  
5. TUNE/ENTER Button  
6. RANDOM Playback Button  
7. REPEAT Selection Button  
8. SCAN Selection Button  
A-200FDD  
4 116  
Features of your vehicle  
In case USB is connected to the multi  
media jack inside the console on the left  
hand side of the driver’s seat. When USB  
is connected, the ‘USB’ icon will be dis-  
played on the top right corner of the dis-  
play screen.  
3. INFO Button  
6. RANDOM Playback Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟  
TOTAL FILE➟FILE NAME➟… (Displays  
no information if the file has no song  
information.)  
Press the button for less than 0.8 second  
to start or stop the random playback of  
the songs in the current folder.  
Press the button for more than 0.8 sec-  
ond to randomly play the entire songs in  
the USB device.  
1. AUX Selection Button  
Press the button again to cancel the mode.  
If USB is not connected, it switches to the  
USB mode from the Radio and CD mode  
to play the song files stored in the USB.  
4. Folder moving Button  
7. REPEAT Button  
Press the button for less than 0.8 second  
to repeat the song currently played.  
Press the button for more than 0.8 sec-  
ond to repeat the entire songs in the USB  
device.  
• Moves [FLDR  
] button child folder of  
the current folder and displays the first  
song in the folder. Press TUNE/ENTER  
button to move to the folder displayed.  
It will play the first song in the folder.  
If AUX is not connected, it is invalid key.  
2. Track Moving Button  
• Moves [FLDR  
] button parent folder  
• Press the [SEEK  
] button for less  
and displays the first song in the folder.  
Press TUNE/ENTER button to move to  
the folder displayed. It will play the first  
song in the folder.  
than 0.8 second to play from the begin-  
ning of the song currently played.  
Press the button for less than 0.8 sec-  
ond and press it again within 1 second  
to move to and play the previous track.  
8. SCAN Button  
Plays 10 seconds of each song in the USB  
device.  
Press the button once again to cancel  
scanning.  
Press the button for 0.8 second or 5. TUNE/ENTER Button  
longer to play the song in reverse  
direction in fast speed.  
Turn this button clockwise to display the  
songs next to the currently played song.  
• Press the [SEEK  
than 0.8 second to move to the next  
track.  
] button for less  
Turn the button counterclockwise to dis-  
play the songs before the currently  
played song.  
Press the button to skip to and play the  
selected song.  
Press the button for 0.8 second or  
longer to play the song in forward  
direction in fast speed.  
4 117  
Features of your vehicle  
(Continued)  
(Continued)  
CAUTION IN USING  
USB DEVICE  
• To use the external USB device,  
make sure the device is not  
mounted when starting up the  
vehicle and mount the device  
after starting up.  
• If you start the vehicle when the  
USB device is mounted, it may  
damage the USB device. (USB is  
not ESA)  
• If the vehicle is started up or  
turned off while the external USB  
device is connected, the external  
USB device may not work.  
• It may not play inauthentic MP3 or  
WMA files.  
1) It can only play MP3 files with  
the compression rate between  
8Kbps~320Kbps.  
2) It can only play WMA music  
files with the compression rate  
between 8Kbps~320Kbps.  
• Take cautions for static electricity  
when mounting or dismounting  
the external USB device.  
• Depending on the condition of  
the external USB device, the con-  
nected external USB device can  
be unrecognizable.  
• When the VHAPTTL byte/sector  
setting of External USB devices is  
not either 512BYTE or 2048BYTE,  
then the device will not be recog-  
nized.  
• Use only the USB device format-  
ted to FAT 12/16/32.  
• USB device without USB I/F  
authentication may not be recog-  
nizable.  
• Make sure the USB connection  
terminal does not come in contact  
with human body or any object.  
• If you repeat mounting or dis-  
mounting USB device in a short  
period of time, it may break the  
device.  
• You might hear strange noise  
when mounting or dismounting a  
USB device.  
• If you dismount the external USB  
device during playback in USB  
mode, the external USB device can  
be damaged or malfunction.  
Therefore, mount the external USB  
device when the engine is turned  
off or in another mode.  
• Depending on the type and capac-  
ity of the external USB device or  
the type of the files stored in the  
device, there is a difference in the  
time taken for recognition of the  
device, but this is not a trouble  
and you only have to wait.  
• Do not use the USB device for other  
purposes than playing music files.  
• Use of USB accessories such as  
the recharger or heater using  
USB I/F may lower the perform-  
ance or cause trouble.  
• If you use devices such as the  
USB hub you purchased sepa-  
rately, the vehicle’s audio system  
may not recognize the USB  
device. Connect the USB device  
directly to the multimedia termi-  
nal of the vehicle.  
(Continued)  
• An encoded MP3 player is not  
recognizable.  
(Continued)  
(Continued)  
4 118  
Features of your vehicle  
(Continued)  
(Continued)  
• If USB device is divided by logical  
drives, only the music files on the  
highest-priority drive are recog-  
nized by car audio.  
• Devices such as MP3 Player/  
Cellular phone/Digital camera  
those are not recognizable by  
standard USB I/F can be unrecog-  
nizable.  
• Please avoid using USB memory  
products which can be used as  
key chains or cellular phone  
accessories as they could cause  
damage to the USB jack. Please  
make certain only to use plug type  
connector products as shown  
below.  
• USB devices other than standard-  
ized goods (METAL COVER TYPE  
USB) can be unrecognizable.  
• USB flash memory reader (such  
as CF, SD, microSD, etc.) or exter-  
nal-HDD type devices can be  
unrecognizable.  
• Music files protected by DRM  
(DIGITAL RIGHTS MANAGEMENT)  
are not recognizalbe.  
• The data in the USB memory may  
be lost while using this AUDIO. It  
is recommeded to back up impor-  
tant data on a personal storage  
device.  
(Continued)  
4 119  
Features of your vehicle  
RUNNING iPod (PA710) (IF EQUIPPED)  
1. iPod Selection Button  
2. Track moving Button  
3. INFO Selection Button  
4. Category Selection Button  
5. TUNE/ENTER Button  
6. RANDOM Playback Button  
7. REPEAT Selection Button  
* iPod is a trademark of Apple Inc.  
A-200FDD  
4 120  
Features of your vehicle  
In case the iPod exclusive cable is con-  
nected to the multimedia jack inside the  
console on the left hand side of the dri-  
ver’s seat. When the iPod is connected,  
the ‘iPod’ icon will be displayed on the top  
right corner of the display screen.  
If you want to listen to the song displayed  
in the song category, press the button,  
then it will skip to the selected song and  
play.  
3. INFO Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟ TITLE➟ ARTIST➟ ALBUM➟ FILE  
NAME➟…  
(Displays no information if the file has no  
song information.)  
6. RANDOM Playback Button  
Press the button for less than 0.8 second  
to activate or deactivate the random play-  
back of the songs within the current cat-  
egory.  
Press the button for longer than 0.8 sec-  
ond to randomly play all songs in the  
entire album of the iPod.  
1. iPod Selection Button  
If iPod is connected, it switches to the  
iPod mode from the Radio and CD mode  
to play the song files stored in the iPod.  
If there are no CD and AUX, it displays  
'NO MEDIA'.  
4. Category Selection Button  
Moves to the upper category from cur-  
rently played category of the iPod.  
You will be able to search through the  
lower category of the selected category.  
The order of iPod's category is SONG,  
ALBUMS, ARTISTS, GENRES, and  
iPod. (Refer to the iPod user's manual for  
more information)  
Press the button once again to cancel the  
mode.  
2. Track Moving Button  
• Press the [SEEK  
] button for less  
7. REPEAT Button  
Repeats the song currently played.  
than 0.8 second to play from the begin-  
ning of the song currently played.  
Press the button for less than 0.8 sec- 5. TUNE/ENTER Button  
ond and press it again within 1 second  
to move to and play the previous track.  
Press the button for 0.8 second or  
longer to play the song in reverse  
direction in fast speed.  
When you turn the button clockwise, it  
will display the songs (category) next to  
the song currently played (category in  
the same level).  
Also, when you turn the button counter-  
clockwise, it will display the songs (cate-  
gory) before the song currently played  
(category in the same level).  
• Press the [SEEK  
] button for less  
than 0.8 second to move to the next  
track.  
Press the button for 0.8 second or  
longer to play the song in forward  
direction in fast speed.  
4 121  
Features of your vehicle  
✽
NOTICE FOR USING iPod  
DEVICE  
(Continued)  
CAUTION IN USING  
iPod DEVICE  
• When the iPod cable is connected,  
the system can be switched to the  
AUX mode even without the iPod  
device and can cause noise.  
Disconnect iPod cable when you  
are not using the iPod device.  
• When the iPod is not used for the  
audio system, the iPod cable has  
to be separate from iPod devices.  
Original display of iPod may not be  
displayed.  
• Some iPod models might not support  
the communication protocol and the  
files will not be played. (iPod models  
supported: Mini, 4G, Photo, Nano,  
5G)  
• You need the power cable exclu-  
sive for iPod (purchased sepa-  
rately) in order to operate iPod  
with the buttons on the audio sys-  
tem. The PC cable provided by  
Apple may cause malfunction and  
do not use it for vehicle use.  
• When connecting the device with  
an iPod cable, push in the jack  
fully not to interfere with commu-  
nication.  
• When adjusting the sound effects  
of iPod and the audio system, the  
sound effects of both devices will  
overlap each and might cause  
reduce or distort the quality of the  
sound.  
• The order of search or playback of  
songs in the iPod can be different  
from the order searched in the audio  
system.  
• If the iPod crashes due to its own trou-  
ble, reset iPod. (Reset: Refer to iPod  
manual)  
• An iPod may not operate normally on  
low battery.  
• Deactivate (turn off) the equalizer  
function of iPod when adjusting  
the audio system’s volume, and  
turn off the equalizer of the audio  
system when using the equalizer  
of iPod.  
(Continued)  
4 122  
Features of your vehicle  
RADIO, SET UP, VOLUME CONTROL (PA760) (IF EQUIPPED)  
1. FM Selection Button  
2. AM Selection Button  
3. CD Selection Button  
4. AUX Selection Button  
5. Automatic Channel Selection Button  
6. Power ON/OFF & VOLUME Control  
Button  
7. AUTO STORE Button  
8. Screen ON/ OFF Button  
9. Information Display Button  
10. SET UP Button  
11. TUNE/ENTER Button  
12. Preset Button  
A-300FDD  
4 123  
Features of your vehicle  
1. FM Selection Button  
5. Automatic Channel Selection  
Button  
7. AUTO STORE Button  
Turns to FM mode and toggles FM1 and  
FM2 when the button is pressed each  
time.  
When the button is pressed, it automati-  
cally selects and saves channels with  
high reception rate to PRESET buttons  
(1~6) and plays the channel saved in  
PRESET1.  
If no channel is saved after AST, it will  
play the previous channel.  
• When the [SEEK  
]button is pressed,  
it reduces the band frequency by  
100khz to automatically select channel.  
Stops at the previous frequency if no  
channel is found.  
2. AM Selection Button  
Turns to AM mode, and toggles in the  
order of AM1➟AM2➟AM1··· when the  
button is pressed each time.  
• When the [SEEK  
]button is pressed,  
it increases the band frequency by  
100khz to automatically select channel.  
Stops at the previous frequency if no  
channel is found.  
8. Screen ON/ OFF Button  
Turns off/on the displayed data and light  
on LCD.  
The screen and light will be turned on by  
pressing any button except DARK button  
when the screen is turned off.  
3. CD Selection Button  
If there is a cd in the CDP DECK it plays  
the CD.  
Press CD button to automatically insert  
CD when the disc is ejected from the  
deck by pressing CD EJECT.  
6. Power ON/OFF & Volume  
Control Button  
• Turns on/off the set when the IGNI-  
TION SWITCH is on ACC or ON. If the  
button is turned to the right, it increas-  
es the volume and left, decreases the  
volume.  
• In AUX mode, the volume and tone  
(BASS, MID, TRE) are adjusted in a  
separate way.  
If you pull out AUX from a jack and  
insert it again, then only volume goes  
back to step 10.  
9. Information Display Button  
Type A  
Displays the information of the channel  
currently played by RDS.  
4. AUX Selection Button  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
If no Disc and auxiliary device is connected,  
it displays “NO Media” for 5 seconds and  
returns to the previous mode.  
Type B  
Displays the information of the channel  
currently played.  
4 124  
Features of your vehicle  
10. SET UP Button  
11. TUNE/ENTER Button  
Press this button to turn to the SOUND,  
clock setting, time display, SCROLL,  
SDVC, temperature display and adjust-  
ment mode.  
If no action is taken for 5 seconds after  
pressing the button, it will return to the  
play mode.(After entering SET UP mode,  
move between items using the left, right  
and PUSH functions of the TUNE button.)  
Turn this button clockwise by one notch  
to increase frequency by 0.05Mhz from  
current frequency.  
Turn this button counterclockwise by one  
notch to decrease frequency by 0.05Mhz  
from current frequency.  
Press this button while holding SET UP  
button to activate / inactivate the item to.  
Select SET UP item using left and right  
function of the Tune button.  
Type A  
The set up item changes from SOUND  
➟CLOCK➟TIME➟SCROLL➟SDVC➟TE  
MP➟SOUND...  
12. Preset Button  
Push [1]~[6] buttons less than 0.8 second  
to play the channel saved in each button.  
Push preset button for 0.8 second or  
longer to save current channel to the  
respective button with a beep.  
Type B  
The set up item changes from AUDIO➟  
CLOCK➟TIME➟SCROLL➟SDVC➟TEMP  
➟AUDIO...  
4 125  
Features of your vehicle  
CD (PA760) (IF EQUIPPED)  
1. CD loading slot  
2. CD indicator  
3. CD Eject Button  
4. LOAD Button  
5. AUX Selection Button  
6. Automatic Track Selection Button  
7. INFO Button  
8. TUNE/ENTER Button  
9. REPEAT Button  
10. RANDOM Play Button  
11. DISC selection Button  
12. SCAN Play Button  
13. FOLDER Moving Button  
A-300FDD  
4 126  
Features of your vehicle  
1. CD loading slot  
5. AUX Selection Button  
7. INFO Button  
Please face printed side upward and  
gently push in. When the ignition switch  
is on ACC or ON and power is off, power  
is automatically turned on if the CD is  
loaded.This CDP supports both 8cm and  
12 cm CDs. But if VCD, Data CD are  
loaded, "Er-6" message will appear and  
CD will be ejected.  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
If no auxiliary device is connected, it dis-  
plays "NO CONNECT" for 3 seconds and  
returns to the previous mode.  
Displays the information of the current  
CD TRACK in the order of DISC  
TITLE➟DISC ARTIST➟TRACK TITLE➟  
TRACK ARTIST➟TOTAL TRACK➟ Play  
Screen➟DISC TITLE➟···.(not displayed if  
the information is not available on the  
DISC.)  
(If MP3 is displayed FILE NAME ➟TITLE  
➟ARTIST➟ALBUM➟FOLDER➟TOTAL  
FILE➟FILE NAME➟···)  
6. Automatic Track Selection  
Button  
2. CD Indicator  
CD is loaded, this slot icon is displayed,  
If the CD is ejected the slot icon is display  
off.  
• Push [SEEK  
] button for less than  
0.8 second to play from the beginning  
of current song.  
8. TUNE/ENTER Button  
Turn this button clockwise to display  
songs after current song.  
Also, turn this button counterclockwise to  
display songs before current song.  
To listen to the displayed song, press the  
button to skip to the song and play.  
• Push [SEEK  
] button for less than  
0.8 second and press again within 3  
seconds to play the previous song.  
3. CD eject Button  
• Pressing the button for less than 0.8  
second will eject 1 disc while pressing  
for 0.8 second ~ 3 seconds will eject all  
discs.  
• Pressing the button for over 5 seconds  
will eject all discs by force. (EMER-  
GENCY EJECT)  
• Push [SEEK  
] button for 0.8 second  
or longer to initiate reverse direction  
high speed sound search of current  
song.  
9. REPEAT Button  
Repeats current song when the button is  
pressed for less than 0.8 second.  
Repeats the entire DISC when the button  
is pressed for 0.8 second or longer.  
• Push [SEEK  
0.8 second to play the next song.  
• Push [SEEK ] button for 0.8 second  
] button for less than  
or longer to initiate high speed sound  
search of current song.  
4. CD LOAD Button  
Push [LOAD] button to load CDs to avail-  
able CDC deck (from 1~6). Push [LOAD]  
button for more than 2 seconds to load  
into all available decks.  
The last CD will play. 10 seconds idle sta-  
tus will disable loading process.  
10. RANDOM Play Button  
Turns on/off the randomization of the play  
list of files in the currently played DISC.  
To cancel the mode, press the key once  
again.  
4 127  
Features of your vehicle  
11. DISC Selection Button  
• [DISC  
] Change Button  
Changes disc to the previous disc.  
• [DISC  
] Change Button  
Changes disc to the next disc.  
12. SCAN Play Button  
Plays first 10 seconds of each song in the  
DISC.  
To cancel the mode, press the key once  
again.  
13. FOLDER Moving Button  
• Moves [FLDR  
] button child folder of  
the current folder and displays the first  
song in the folder. Press TUNE/ENTER  
button to move to the folder displayed.  
It will play the first song in the folder.  
• Moves [FLDR  
] button parent folder  
and displays the first song in the folder.  
Press TUNE/ENTER button to move to  
the folder displayed. It will play the first  
song in the folder.  
4 128  
Features of your vehicle  
USING USB (PA760) (IF EQUIPPED)  
1. AUX Selection Button  
2. Track moving Button  
3. INFO Selection Button  
4. Folder moving Button  
5. TUNE/ENTER Button  
6. RANDOM Playback Button  
7. REPEAT Selection Button  
8. SCAN Selection Button  
A-300FDD  
4 129  
Features of your vehicle  
In case USB is connected to the multi  
media jack inside the console on the left  
hand side of the driver’s seat. When USB  
is connected, the ‘USB’ icon will be dis-  
played on the top right corner of the dis-  
play screen.  
3. INFO Button  
6. RANDOM Playback Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟  
TOTAL FILE➟FILE NAME➟… (Displays  
no information if the file has no song  
information.)  
Press the button for less than 0.8 second  
to start or stop the random playback of  
the songs in the current folder.  
Press the button for more than 0.8 sec-  
ond to randomly play the entire songs in  
the USB device.  
1.AUX Selection Button  
Press the button again to cancel the mode.  
If USB is not connected, it switches to the  
USB mode from the Radio and CD mode  
to play the song files stored in the USB.  
4. Folder moving Button  
7. REPEAT Button  
Press the button for less than 0.8 second  
to repeat the song currently played.  
Press the button for more than 0.8 sec-  
ond to repeat the entire songs in the USB  
device.  
• Moves [FLDR  
] button child folder of  
the current folder and displays the first  
song in the folder. Press TUNE/ENTER  
button to move to the folder displayed.  
It will play the first song in the folder.  
If AUX is not connected, it is invalid key.  
2. Track Moving Button  
• Moves [FLDR  
] button parent folder  
• Press the [SEEK  
] button for less  
and displays the first song in the folder.  
Press TUNE/ENTER button to move to  
the folder displayed. It will play the first  
song in the folder.  
than 0.8 second to play from the begin-  
ning of the song currently played.  
Press the button for less than 0.8 sec-  
ond and press it again within 1 second  
to move to and play the previous track.  
8. SCAN Button  
Plays 10 seconds of each song in the USB  
device.  
Press the button once again to cancel  
scanning.  
Press the button for 0.8 second or 5. TUNE/ENTER Button  
longer to play the song in reverse  
direction in fast speed.  
Turn this button clockwise to display the  
songs next to the currently played song.  
• Press the [SEEK  
than 0.8 second to move to the next  
track.  
] button for less  
Turn the button counterclockwise to dis-  
play the songs before the currently  
played song.  
Press the button to skip to and play the  
selected song.  
Press the button for 0.8 second or  
longer to play the song in forward  
direction in fast speed.  
4 130  
Features of your vehicle  
(Continued)  
(Continued)  
CAUTION IN USING  
USB DEVICE  
• To use the external USB device,  
make sure the device is not  
mounted when starting up the  
vehicle and mount the device  
after starting up.  
• If you start the vehicle when the  
USB device is mounted, it may  
damage the USB device. (USB is  
not ESA)  
• If the vehicle is started up or  
turned off while the external USB  
device is connected, the external  
USB device may not work.  
• It may not play inauthentic MP3 or  
WMA files.  
1) It can only play MP3 files with  
the compression rate between  
8Kbps~320Kbps.  
2) It can only play WMA music  
files with the compression rate  
between 8Kbps~320Kbps.  
• Take cautions for static electricity  
when mounting or dismounting  
the external USB device.  
• Depending on the condition of  
the external USB device, the con-  
nected external USB device can  
be unrecognizable.  
• When the VHAPTTL byte/sector  
setting of External USB devices is  
not either 512BYTE or 2048BYTE,  
then the device will not be recog-  
nized.  
• Use only the USB device format-  
ted to FAT 12/16/32.  
• USB device without USB I/F  
authentication may not be recog-  
nizable.  
• Make sure the USB connection  
terminal does not come in contact  
with human body or any object.  
• If you repeat mounting or dis-  
mounting USB device in a short  
period of time, it may break the  
device.  
• You might hear strange noise  
when mounting or dismounting a  
USB device.  
• If you dismount the external USB  
device during playback in USB  
mode, the external USB device can  
be damaged or malfunction.  
Therefore, mount the external USB  
device when the engine is turned  
off or in another mode.  
• Depending on the type and capac-  
ity of the external USB device or  
the type of the files stored in the  
device, there is a difference in the  
time taken for recognition of the  
device, but this is not a trouble  
and you only have to wait.  
• Do not use the USB device for other  
purposes than playing music files.  
• Use of USB accessories such as  
the recharger or heater using  
USB I/F may lower the perform-  
ance or cause trouble.  
• If you use devices such as the  
USB hub you purchased sepa-  
rately, the vehicle’s audio system  
may not recognize the USB  
device. Connect the USB device  
directly to the multimedia termi-  
nal of the vehicle.  
(Continued)  
• An encoded MP3 player is not  
recognizable.  
(Continued)  
(Continued)  
4 131  
Features of your vehicle  
(Continued)  
(Continued)  
• If USB device is divided by logical  
drives, only the music files on the  
highest-priority drive are recog-  
nized by car audio.  
• Devices such as MP3 Player/  
Cellular phone/Digital camera  
those are not recognizable by  
standard USB I/F can be unrecog-  
nizable.  
• Please avoid using USB memory  
products which can be used as  
key chains or cellular phone  
accessories as they could cause  
damage to the USB jack. Please  
make certain only to use plug type  
connector products as shown  
below.  
• USB devices other than standard-  
ized goods (METAL COVER TYPE  
USB) can be unrecognizable.  
• USB flash memory reader (such  
as CF, SD, microSD, etc.) or exter-  
nal-HDD type devices can be  
unrecognizable.  
• Music files protected by DRM  
(DIGITAL RIGHTS MANAGEMENT)  
are not recognizalbe.  
• The data in the USB memory may  
be lost while using this AUDIO. It  
is recommeded to back up impor-  
tant data on a personal storage  
device.  
(Continued)  
4 132  
Features of your vehicle  
RUNNING iPod (PA760) (IF EQUIPPED)  
1. iPod Selection Button  
2. Track moving Button  
3. INFO Selection Button  
4. Category Selection Button  
5. TUNE/ENTER Button  
6. RANDOM Playback Button  
7. REPEAT Selection Button  
* iPod is a trademark of Apple Inc.  
A-300FDD  
4 133  
Features of your vehicle  
In case the iPod exclusive cable is con-  
nected to the multimedia jack inside the  
console on the left hand side of the dri-  
ver’s seat. When the iPod is connected,  
the ‘iPod’ icon will be displayed on the top  
right corner of the display screen.  
If you want to listen to the song displayed  
in the song category, press the button,  
then it will skip to the selected song and  
play.  
3. INFO Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟ TITLE➟ ARTIST➟ ALBUM➟ FILE  
NAME➟…  
(Displays no information if the file has no  
song information.)  
6. RANDOM Playback Button  
Press the button for less than 0.8 second  
to activate or deactivate the random play-  
back of the songs within the current cat-  
egory.  
Press the button for longer than 0.8 sec-  
ond to randomly play all songs in the  
entire album of the iPod.  
1. iPod Selection Button  
If iPod is connected, it switches to the  
iPod mode from the Radio and CD mode  
to play the song files stored in the iPod.  
If there are no CD and AUX, it displays  
'NO MEDIA'.  
4. Category Selection Button  
Moves to the upper category from cur-  
rently played category of the iPod.  
You will be able to search through the  
lower category of the selected category.  
The order of iPod's category is SONG,  
ALBUMS, ARTISTS, GENRES, and  
iPod. (Refer to the iPod user's manual for  
more information)  
Press the button once again to cancel the  
mode.  
2. Track Moving Button  
• Press the [SEEK  
] button for less  
7. REPEAT Button  
Repeats the song currently played.  
than 0.8 second to play from the begin-  
ning of the song currently played.  
Press the button for less than 0.8 sec- 5. TUNE/ENTER Button  
ond and press it again within 1 second  
to move to and play the previous track.  
Press the button for 0.8 second or  
longer to play the song in reverse  
direction in fast speed.  
When you turn the button clockwise, it  
will display the songs (category) next to  
the song currently played (category in  
the same level).  
Also, when you turn the button counter-  
clockwise, it will display the songs (cate-  
gory) before the song currently played  
(category in the same level).  
• Press the [SEEK  
] button for less  
than 0.8 second to move to the next  
track.  
Press the button for 0.8 second or  
longer to play the song in forward  
direction in fast speed.  
4 134  
Features of your vehicle  
✽
NOTICE FOR USING iPod  
DEVICE  
(Continued)  
CAUTION IN USING  
iPod DEVICE  
• When the iPod cable is connected,  
the system can be switched to the  
AUX mode even without the iPod  
device and can cause noise.  
Disconnect iPod cable when you  
are not using the iPod device.  
• When the iPod is not used for the  
audio system, the iPod cable has  
to be separate from iPod devices.  
Original display of iPod may not be  
displayed.  
• Some iPod models might not support  
the communication protocol and the  
files will not be played. (iPod models  
supported: Mini, 4G, Photo, Nano,  
5G)  
• You need the power cable exclu-  
sive for iPod (purchased sepa-  
rately) in order to operate iPod  
with the buttons on the audio sys-  
tem. The PC cable provided by  
Apple may cause malfunction and  
do not use it for vehicle use.  
• When connecting the device with  
an iPod cable, push in the jack  
fully not to interfere with commu-  
nication.  
• When adjusting the sound effects  
of iPod and the audio system, the  
sound effects of both devices will  
overlap each and might cause  
reduce or distort the quality of the  
sound.  
• The order of search or playback of  
songs in the iPod can be different  
from the order searched in the audio  
system.  
• If the iPod crashes due to its own trou-  
ble, reset iPod. (Reset: Refer to iPod  
manual)  
• An iPod may not operate normally on  
low battery.  
• Deactivate (turn off) the equalizer  
function of iPod when adjusting  
the audio system’s volume, and  
turn off the equalizer of the audio  
system when using the equalizer  
of iPod.  
(Continued)  
4 135  

Related Topics

Features of your vehicle
Keys Remote keyless entry (if equipped) Theft-alarm system (if equipped) Door locks Tailgate Windows Bonnet Fuel filler lid Sunroof (if equipped) Steering wheel Mirrors Instrument cluster Hazard warning flasher Lighting Wipers and washers Interior light Defroster Manual climate control system (if equipped) Automatic climate control system (if equipped) Windshield defrosting and defogging Storage compartment Interior features Exterior features

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot