Get Features of your vehicle -> Automatic climate control system (if equipped) Guide for Hyundai I30 4 Door Third Generation (2016-2026)

Features of your vehicle

AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

Type A

1. Fan speed control button

2. Air conditioning button

5. AUTO (automatic control) button

6. OFF button

9. Mode selection button

10. A/C display

3. Air intake control button

4. Front windshield defrost button

7. Temperature control knob

8. Rear window defrost button

OFD0471100

D240000AFD

4 73

Features of your vehicle

Type B

1. Fan speed control button

2. Air intake control button

4. OFF button

7. Air conditioning button

8. Mode selection button

9. A/C display

5. Temperature control knob

6. Front windshield defrost button

3. AUTO (automatic control) button

OFD0471101

4 74

Features of your vehicle

2. Turn the temperature control knob to

set the desired temperature.

If the temperature is set to the lowest

setting (Lo), the air conditioning sys-

tem will operate continuously.

3. To turn the automatic operation off,

press any button except temperature

control knob. If you press the mode

selection button, air-conditioning but-

ton*, defrost button, air intake control

button* or fan speed button, the select-

ed function will be controlled manually

while other functions operate automat-

ically. (* : type B only)

OFD047102

OUN026312

D240100AFD

✽

NOTICE

Automatic heating and air condi-

tioning

The automatic climate control system is

controlled by simply setting the desired

temperature.

The Full Automatic Temperature Control

(FATC) system automatically controls the

heating and cooling system as follows;

Never place anything over the sensor

located on the instrument panel to

ensure better control of the heating and

cooling system.

Regardless of the temperature setting,

when using automatic operation, the air

conditioning system can automatically

turn on to decrease the humidity inside

the vehicle, even if the temperature is set

to warm.

1. Push the AUTO button. It is indicated

by AUTO on the display. The modes,

fan speeds, air intake and air-condi-

tioning will be controlled automatically

by temperature setting.

4 75

Features of your vehicle

D240200AUN

Type A

Manual heating and air condition-

ing

Face-Level (B, D)

The heating and cooling system can be

controlled manually by pushing buttons

other than the AUTO button. In this case,

the system works sequentially according

to the order of buttons selected.

Air flow is directed toward the upper body

and face. Additionally, each outlet can be

controlled to direct the air discharged

from the outlet.

When pressing any button (or turning

any knob) except AUTO button while

automatic operation, the functions not

selected will be controlled automatically.

1. Start the engine.

2. Set the mode to the desired position.

3. Set the temperature control to the

desired position.

4. Set the air intake control to the outside

(fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn the

air conditioning system on.

Floor-Level (C, E, A, D)

Most of the air flow is directed to the

floor.

OFD047103

D240201AFD

Mode selection

Defrost-Level (A, D)

The mode selection button controls the

direction of the air flow through the venti-

lation system.

Refer to the illustration in the “Manual cli-

mate control system”.

Most of the air flow is directed to the

windshield.

Also you may select 2~3 modes at the

same time for desired air flow.

Type A :

- face (

- floor (

) + floor (

) mode

If you push the button once, the corre-

sponding switch will turn on, and if you

push the button again, the switch will turn

off.

Press the AUTO button in order to con-

vert to full automatic control of the sys-

tem.

) + defrost (

) + floor (

) mode

- face (

mode

) + defrost (

)

4 76

Features of your vehicle

Type B

Face-Level (B, D)

Air flow is directed toward the upper body

and face. Additionally, each outlet can be

controlled to direct the air discharged

from the outlet.

Bi-Level (B, D, C, E)

Air flow is discharged towards the face and

floor.

OFD047124

OFD047104

Maximum (MAX) defrost mode

Type B:

When you select the MAX defrost mode,

the following system settings will be

made automatically;

The air flow outlet port is converted as

follows:

Floor-Level (C, E, A, D)

• the air conditioning system will be

turned on.

• the outside(fresh) air position will be

selected.

• the fan speed will be set to the high

speed.

Most of the air flow is directed to the

floor, with a small amount of the air being

directed to the windshield and side win-

dow defroster.

To turn the MAX defrost mode off, press

Floor/Defrost-Level (A, C, E, D)

the mode button (

,

) or MAX

(

) defrost button again or AUTO but-

ton.

Most of the air flow is directed to the floor

and the windshield with a small amount

directed to the side window defrosters.

4 77

Features of your vehicle

OFD047105

OFD047079R

OFD047107

D240202AUN

Defrost-level (A, D)

Most of the air flow is directed to the

windshield with a small amount of air

directed to the side window defrosters.

Instrument panel vents

Temperature control

The outlet port can be opened or closed

separately using the horizontal thumb-

wheel. To close the vent, rotate it left to

the maximum position. To open the vent,

rotate it right to the desired position.

The temperature will increase to the

maximum (HI) by turning the knob to the

right extremely.

The temperature will decrease to the

minimum (Lo) by turning the knob to the

left extremely.

When turning the knob, the temperature

will increase or decrease by 0.5°C/1°F.

When set to the lowest temperature set-

ting, the air conditioning will operate con-

tinuously.

Also, you can adjust the direction of air

delivered from these vents using the vent

control lever as shown.

4 78

Features of your vehicle

Temperature conversion

If the battery has been discharged or dis-

connected, the temperature mode dis-

play will reset to Centigrade.

Recirculated air position

Type A

Type B

The indicator light on the

button illuminates when the

recirculated air position is

selected.

This is normal condition. You can switch

the

temperature

mode

between

With the recirculated air

position selected, air from

passenger compartment

will be drawn through the

heating system and heated

or cooled according to the

function selected.

Centigrade to Fahrenheit as follows;

While depressing the AUTO button,

depress the OFF button for 3 seconds or

more. The display will change from

Centigrade to Fahrenheit, or from

Fahrenheit to Centigrade.

OFD047108/OFD047109

D240203AFD

Outside (fresh) air position

Air intake control

This is used to select outside (fresh) air

position or recirculated air position.

To change the air intake control position,

push the control button.

The indicator light on the

button does not illuminate

when the outside (fresh) air

position is selected (type A).

With the outside (fresh) air

position selected, air enters

the vehicle from outside and

is heated or cooled accord-

ing to the function selected.

4 79

Features of your vehicle

✽

NOTICE

Type A

Type B

Type A

Type B

It should be noted that prolonged oper-

ation of the heating in recirculated air

position will cause fogging of the wind-

shield and side windows and the air

within the passenger compartment will

become stale.

In addition, prolonged use of the air con-

ditioning with the recirculated air posi-

tion selected, will result in excessively

dry air in the passenger compartment.

OFD047110/OFD047111

OFD047112/OFD047113

WARNING

D240205AUN

D240206AUN

• Continued use of the climate con-

trol system operation in the recir-

culated air position may allow

humidity to increase inside vehicle

which may fog the glass and

obscure visibility.

• Do not sleep in a vehicle with air

conditioning or heating system on.

It may cause serious harm or death

due to a drop in the oxygen level

and/or body temperature.

Fan speed control

Air conditioning

The fan speed can be set to the desired

speed by pressing the fan speed control

button.

The higher the fan speed is, the more air

is delivered.

Push the A/C button to turn the air condi-

tioning system on (indicator light will illu-

minate).

Push the button again to turn the air con-

ditioning system off.

Pressing the OFF button turns off the

fan.

• Continued use of the climate con-

trol system operation in the reciru-

clated air position can cause

drowsiness or sleepiness, and loss

of vehicle control. Set the air intake

control to the outside (fresh) air

position as much as possible while

driving.

4 80

Features of your vehicle -> Automatic climate control system (if equipped) for Your Hyundai I30 4 Door Third Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals