Get Features of your vehicle -> Manual climate control system (if equipped) Guide for Hyundai I30 4 Door Third Generation (2016-2026)

Features of your vehicle

MANUAL CLIMATE CONTROL SYSTEM (IF EQUIPPED)

1. Temperature control knob

2. Fan speed control knob

3. Mode buttons

4. Air conditioning button (if equipped)

5. Air intake control buttons

6. Front window defroster button

7. Rear window defroster button

OFD040074

D230000AFD

4 64

Features of your vehicle

D230100AUN

Heating and air conditioning

1. Start the engine.

2. Set the mode to the desired position.

3. Set the temperature control to the

desired position.

4. Set the air intake control to the outside

(fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn the

air conditioning system (if equipped)

on.

OFD047076R

4 65

Features of your vehicle

Face-Level (B,D)

Floor-Level (C, E, A, D)

Most of the air flow is directed to the

floor, with a small amount of the air being

directed to the windshield and side win-

dow defroster.

Air flow is directed toward the upper body

and face. Additionally, each outlet can be

controlled to direct the air discharged

from the outlet.

Floor/Defrost-Level (A, C, E, D)

Bi-Level (B, D, C, E)

Most of the air flow is directed to the floor

and the windshield with a small amount

directed to the side window defrosters.

Air flow is discharged towards the face and

floor.

OFD040077

D230101AFD

Mode selection

The mode buttons control the direction of

the air flow through the ventilation sys-

tem.

Defrost-Level (A, D)

Air can be directed to the floor, dashboard

outlets, or windshield. Five symbols are

used to represent Face, Bi-Level, Floor,

Floor-Defrost and Defrost air position.

Most of the air flow is directed to the

windshield with a small amount of air

directed to the side window defrosters.

4 66

Features of your vehicle

OFD047079R

OFD047078

OFD040080

D230102AFD

D230103AFD

Instrument panel vents

Temperature control

Air intake control

This is used to select outside (fresh) air

position or recirculated air position.

To change the air intake control position,

push the control button.

The outlet port can be opened or closed

separately using the horizontal thumb-

wheel. To close the vent, rotate it left to

the maximum position. To open the vent,

rotate it right to the desired position.

The temperature control knob allows you

to control the temperature of the air flow-

ing from the ventilation system. To

change the air temperature in the pas-

senger compartment, turn the knob to

the right position for warm air or left posi-

tion for cooler air.

Also, you can adjust the direction of air

delivery from these vents using the vent

control lever as shown.

4 67

Features of your vehicle

Recirculated air position

✽

NOTICE

The indicator light on the

WARNING

Prolonged operation of the heater in the

recirculated air position (without air

conditioning selected) may cause fog-

ging of the windshield and side windows

and the air within the passenger com-

partment may become stale.

button is illuminated when

the recirculated air position

is selected.

With the recirculated air

position selected, air from

passenger compartment

will be drawn through the

heating system and heated

or cooled according to the

function selected.

• Continued use of the climate con-

trol system operation in the recir-

culated air position may allow

humidity to increase inside the

vehicle which may fog the glass

and obscure visibility.

In addition, prolonged use of the air

conditioning with the recirculated air

position selected will result in excessive-

ly dry air in the passenger compart-

ment.

• Do not sleep in a vehicle with the

air conditioning or heating sys-

tem on. It may cause serious

harm or death due to a drop in the

oxygen level and/or body temper-

ature.

Outside (fresh) air position

• Continued use of the climate con-

trol system operation in the recir-

culated air position can cause

drowsiness or sleepiness, and

loss of vehicle control. Set the air

intake control to the outside

(fresh) air position as much as

possible while driving.

The indicator light on the

button is illuminated when

the outside (fresh) air posi-

tion is selected.

With the outside (fresh) air

position selected, air enters

the vehicle from outside and

is heated or cooled accord-

ing to the function selected.

4 68

Features of your vehicle

System operation

D230501AUN

Ventilation

1. Set the mode to the

position.

2. Set the air intake control to the outside

(fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

OFD047081

OFD047082

D230502AUN

D230104AUN

D230105AUN

Heating

Fan speed control

Air conditioning (if equipped)

1. Set the mode to the

position.

The ignition switch must be in the ON

position for fan operation.

The fan speed control knob allows you to

control the fan speed of the air flowing

from the ventilation system. To change

the fan speed, turn the knob to the right

for higher speed or left for lower speed.

Push the A/C button to turn the air condi-

tioning system on (indicator light will illu-

minate). Push the button again to turn the

air conditioning system off.

2. Set the air intake control to the outside

(fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired, turn

the air conditioning system (if

equipped) on.

Setting the fan speed control knob to the

“0” position turns off the fan.

• If the windshield fogs up, set the mode

to the

,

position.

4 69

Features of your vehicle

D230503AFD

Operation Tips

✽

NOTICE

Air conditioning (if equipped)

• To keep dust or unpleasant fumes from

entering the car through the ventilation

system, temporarily set the air intake

control to the recirculated air position.

Be sure to return the control to the

fresh air position when the irritation

has passed to keep fresh air in the

vehicle. This will help keep the driver

alert and comfortable.

• When using the air conditioning sys-

tem, monitor the temperature gauge

closely while driving up hills or in

heavy traffic when outside tempera-

tures are high. Air conditioning sys-

tem operation may cause engine over-

heating. Continue to use the blower

fan but turn the air conditioning sys-

tem off if the temperature gauge indi-

cates engine overheating.

All HYUNDAI Air Conditioning Systems

are filled with environmentally friendly

R-134a refrigerant which does not dam-

age to the ozone layer.

1. Start the engine. Push the air condi-

tioning button.

2. Set the mode to the

3. Set the air intake control to the outside

air or recirculated air position.

4. Adjust the fan speed control and tem-

perature control to maintain maximum

comfort.

• When maximum cooling is desired, set

the temperature control to the extreme

left position then set the fan speed

control to the highest speed.

position.

• Air for the heating/cooling system is

drawn in through the grilles just ahead

of the windshield. Care should be

taken that these are not blocked by

leaves, snow, ice or other obstructions.

• To prevent interior fog on the wind-

shield, set the air intake control to the

fresh air position and fan speed to the

desired position, turn on the air condi-

tioning system, and adjust temperature

control to desired temperature.

• When opening the windows in humid

weather air conditioning may create

water droplets inside the vehicle.

Since excessive water droplets may

cause damage to electrical equipment,

air conditioning should only be run

with the windows closed.

4 70

Features of your vehicle

Air conditioning system operation tips

✽

NOTICE

• If the vehicle has been parked in direct

sunlight during hot weather, open the

windows for a short time to let the hot

air inside the vehicle escape.

Outside air

• Replace the filter according to the

Maintenance Schedule.

If the car is being driven in severe

conditions such as dusty, rough roads,

more frequent climate control air fil-

ter inspections and changes are

required.

Recirculated

air

• To help reduce moisture inside of win-

dows on rainy or humid days, decrease

the humidity inside the vehicle by oper-

ating the air conditioning system.

• During air conditioning system opera-

tion, you may occasionally notice a

slight change in engine speed as the

air conditioning compressor cycles.

This is a normal system operation

characteristic.

• Use the air conditioning system every

month if only for a few minutes to

ensure maximum system performance.

• When using the air conditioning sys-

tem, you may notice clear water drip-

ping (or even puddling) on the ground

under the passenger side of the vehi-

cle. This is a normal system operation

characteristic.

• Operating the air conditioning system

in the recirculated air position provides

maximum cooling, however, continual

operation in this mode may cause the

air inside the vehicle to become stale.

• During cooling operation, you may

occasionally notice a misty air flow

because of rapid cooling and humid air

intake. This is a normal system opera-

tion characteristic.

• When the air flow rate is suddenly

decreased, the system should be

checked at an authorised HYUNDAI

dealer.

Blower

Heater core

Climate control

Evaporator

core

air filter

1LDA5047

D230300AFD-EA

Climate control air filter

(if equipped)

The climate control air filter installed

behind the glove box filters the dust or

other pollutants that come into the vehi-

cle from the outside through the heating

and air conditioning system. If dust or

other pollutants accumulate in the filter

over a period of time, the air flow from the

air vents may decrease, resulting in

moisture accumulation on the inside of

the windshield even when the outside

(fresh) air position is selected. If this hap-

pens, have the climate control air filter

replaced by an authorised HYUNDAI

dealer.

4 71

Features of your vehicle

D230400AFD-EA

Checking the amount of air con-

ditioner refrigerant and compres-

sor lubricant

When the amount of refrigerant is low,

the performance of the air conditioning is

reduced. Overfilling also has a bad influ-

ence on the air conditioning system.

Therefore, if abnormal operation is

found, have the system inspected by an

authorised HYUNDAI dealer.

✽

NOTICE

It is important when servicing the air

conditioning system that the correct

type and amount of oil and refrigerant is

used. Otherwise, damage to the com-

pressor and abnormal system operation

may occur.

WARNING

The air conditioning system should

be serviced by an authorised

HYUNDAI dealer. Improper service

may cause serious injury to the

person performing the service.

4 72

Features of your vehicle -> Manual climate control system (if equipped) for Your Hyundai I30 4 Door Third Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals