Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
D250000AUN-EA
WARNING - Windshield
heating
or
Do not use the
position
during cooling operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
OFD047114
OFD040115
D240208AUN
Manual climate control system
or button to the
position and
OFF mode
D250101AFD
fan speed control knob or button to
a lower speed.
Push the OFF button to turn off the air cli-
mate control system. However you can
still operate the mode and air intake but-
tons as long as the ignition switch is in
the position ON.
To defog inside windshield
1. Select any fan speed except “0” posi-
tion.
• For maximum defrosting, set the temper-
ature control to the extreme right/hot posi-
tion and the fan speed control to the high-
est speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode to
the floor-defrost position.
• Before driving, clear all snow and ice from
the windshield, rear window, outside rear
view mirrors, and all side windows.
2. Select desired temperature.
3. Select the
or
position.
4. The outside (fresh) air and air condi-
tioning will be selected automatically.
If the air-conditioning and outside (fresh)
air position are not selected automatical-
ly, press the corresponding button manu-
ally.
• Clear all snow and ice from the bonnet
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up inside
of the windshield.
4 81