Get Features of your vehicle -> AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED) Guide for Hyundai Ix35 SUV First Generation (2009-2015)

Features of your vehicle

AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

1. AUTO (automatic control) button

2. Driver’s temperature control knob

3. A/C display

4. Passenger’s temperature control knob

5. Dual temperature control selection button

6. OFF button

7. Front windshield defrost button

8. Air conditioning button

9. Fan speed control button

10. Air intake control button

11. Mode selection button

OLM049121L

4 70

Features of your vehicle

2. Set the temperature switch to the

desired temperature.

If the temperature is set to the lowest

setting (Lo), the air conditioning sys-

tem will operate continuously.

3. To turn the automatic operation off,

select any button or switch of the fol-

lowing:

• Mode selection button

• Air conditioning button

• Front windshield defroster button

• Air intake control button

• Fan speed control switch

OLM049122L

OLM049154

Automatic heating and air condi-

tioning

The automatic climate control system is

controlled by simply setting the desired

temperature.

The Full Automatic Temperature Control

(FATC) system automatically controls the

heating and cooling system as follows;

✽

NOTICE

The selected function will be controlled

manually while other functions operate

automatically.

Never place anything over the sensor

located on the instrument panel to

ensure better control of the heating and

cooling system.

For your convenience and to improve the

effectiveness of the climate control, use

the AUTO button and set the temperature

to 73°F (23°C).

1. Push the AUTO button. It is indicated

by AUTO on the display. The modes,

fan speeds, air intake and air-condi-

tioning will be controlled automatically

by temperature setting.

4 71

Features of your vehicle

Manual heating and air conditioing

The heating and cooling system can be

controlled manually by pushing buttons

or turning knob(s) other than the AUTO

button. In this case, the system works

sequentially according to the order of

buttons or knob(s) selected.

Face-Level (B, D)

Air flow is directed toward the upper body

and face. Additionally, each outlet can be

controlled to direct the air discharged

from the outlet.

✽

NOTICE

When pressing any button (or turning

any knob) except the AUTO button

while using automatic operation, the

functions not selected will continue to be

controlled automatically.

Bi-Level (B, D, E, C)

Air flow is directed towards the face and

the floor.

OLM049123

Mode selection

The mode selection button controls the

direction of the air flow through the venti-

lation system.

1. Start the engine.

2. Set the mode to the desired position.

Floor-Level (C, A, D, E)

The air flow outlet port is converted as

follows:

For improving the effectiveness of

heating and cooling;

Most of the air flow is directed to the

floor, with a small amount of the air being

directed to the windshield and side win-

dow defrosters.

- Heating:

- Cooling:

3. Set the temperature control to the

desired position.

Refer to the illustration in the “Manual cli-

mate control system”.

4. Set the air intake control to the outside

(fresh) air position.

Floor/Defrost-Level (A, C, D, E)

Most of the air flow is directed to the floor

and the windshield with a small amount

directed to the side window defrosters.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn the

air conditioning system on.

Press the AUTO button in order to convert

to full automatic control of the system.

4 72

Features of your vehicle

OLM049124L

OLM049114

OLM049125L

Defrost-Level (A, D)

Instrument panel vents

Temperature control

Most of the air flow is directed to the

windshield with a small amount of air

directed to the side window defrosters.

The outlet vents can be opened or closed

separately using the horizontal thumb-

wheel. To close the vent, rotate it left to

the maximum position. To open the vent,

rotate it right to the desired position.

The temperature will increase to the

maximum (HI) by turning the knob to the

right extremely.

The temperature will decrease to the min-

imum (Lo) by turning the knob to the left

extremely.

Also, you can adjust the direction of air

delivery from these vents using the vent

control lever as shown.

When turning the knob, the temperature

will increase or decrease by 1°F/0.5°C.

When set to the lowest temperature set-

ting, the air conditioning will operate con-

tinuously.

4 73

Features of your vehicle

Adjusting the driver and passenger side

temperature equally

1. Press the DUAL button again to deac-

tivate DUAL mode. The passenger

side temperature will be set to the

same temperature as the driver side.

2. Operate the driver side temperature

control switch. The driver and passen-

ger side temperature will be adjusted

equally.

Temperature conversion

OLM049126

OLM049127N

You can switch the temperature mode

between Fahrenheit to Centigrade as fol-

lows:

Adjusting the driver and passenger side

temperature individually

Outside thermometer

The current outside temperature is dis-

played in 1°F (1°C) increments. The tem-

perature range is between -40°F ~ 140°F

(-40°C ~ 60°C).

• The outside temperature on the display

may not change immediately.

1. Press the DUAL button to operate the

driver and passenger side temperature

individually. Also, if the passenger side

temperature control switch is operat-

ed, it will automatically change to the

DUAL mode as well.

While pressing the OFF button, press the

AUTO button for 3 seconds or more.

The display will change from Fahrenheit

to Centigrade, or from Centigrade to

Fahrenheit.

If the battery has been discharged or dis-

connected, the temperature mode dis-

play will reset to Fahrenheit.

2. Operate the left temperature control to

adjust the driver side temperature.

Operate the right temperature control

to adjust the passenger side tempera-

ture.

When the driver side temperature is set

to the highest (HI) or lowest (Lo) temper-

ature setting, the DUAL mode is deacti-

vated for maximum heating or cooling.

4 74

Features of your vehicle

Recirculated air position

With the recirculated air

WARNING

position selected, air from

the passenger compart-

ment will be drawn through

the heating system and

heated or cooled according

to the function selected.

• Continued use of the climate con-

trol system operation in the recir-

culated air position may allow

humidity to increase inside the

vehicle which may fog the glass

and obscure visibility.

• Do not sleep in a vehicle with the

air conditioning or heating system

on. It may cause serious harm or

death due to a drop in the oxygen

level and/or body temperature.

Outside (fresh) air position

With the outside (fresh) air

position selected, air enters

the vehicle from outside

and is heated or cooled

according to the function

selected.

OLM049128L

Air intake control

This is used to select the outside (fresh)

air position or recirculated air position.

• Continued use of the climate con-

trol system operation in the recir-

culated air position can cause

drowsiness or sleepiness, and loss

of vehicle control. Set the air intake

control to the outside (fresh) air

position as much as possible while

driving.

To change the air intake control position,

push the control button.

✽

NOTICE

Prolonged operation of the heater in the

recirculated air position (without air

conditioning selected) may cause fog-

ging of the windshield and side windows

and the air within the passenger com-

partment may become stale.

In addition, prolonged use of the air con-

ditioning with the recirculated air posi-

tion selected will result in excessively dry

air in the passenger compartment.

4 75

Features of your vehicle

OLM049129L

OLM049130L

OLM049131

Fan speed control

Air conditioning

OFF mode

The fan speed can be set to the desired

speed by operating the fan speed control

switch.

Press the A/C button to turn the air con-

ditioning system on (indicator light will

illuminate).

Press the OFF button to turn off the air

climate control system. However, you can

still operate the mode and air intake but-

tons as long as the ignition switch is in

the ON position.

To change the fan speed, press ( ꢀ)

the switch for higher speed, or press

(⊳ ) the switch for lower speed. To

turn the fan speed control off, press the

front blower OFF button.

Press the button again to turn the air

conditioning system off.

4 76

Features of your vehicle -> AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED) for Your Hyundai Ix35 SUV First Generation (2009-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals