Get Features of your vehicle -> LIGHTING Guide for Hyundai Ix35 SUV First Generation (2009-2015)

Features of your vehicle

LIGHTING

Battery saver function

Headlight escort function

(if equipped)

CAUTION

• The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the parking lights when the

driver removes the ignition key and

opens the driver-side door (in that

order).

• With this feature, the parking lights will

be turned off automatically if the driver

parks on the side of road at night.

If the driver gets out of the vehicle

through other doors (except dri-

ver’s door), the battery saver func-

tion does not operate and the head-

light escort function does not turn

off automatically.Therefore, It caus-

es the battery to be discharged. In

this case, make sure to turn off the

lamp before getting out of the vehi-

cle.

The headlights (and/or taillights) remain

on for approximately 20 minutes after the

ignition key is removed or turned to the

ACC or LOCK position. However, if the

driver’s door is opened and closed, the

headlights are turned off after 30 sec-

onds.

The headlights can be turned off by

pressing the lock button on the transmit-

ter twice or turning off the light switch

from the headlight or Auto light position.

If necessary, to keep the lights on

when the ignition key is removed, per-

form the following:

1) Open the driver-side door.

2) Turn the parking lights OFF and ON

again using the light switch on the

steering column.

4 49

Features of your vehicle

Headlight welcome function

When the headlight switch is in the ON

position or in the AUTO position and all

doors (and tailgate) are closed and

locked, if you press the door unlock but-

ton on the transmitter, the headlight will

come on for about 15 seconds.

If the headlight switch is in the AUTO

position, the function can only operate at

night.

To turn off the headlight immediately, do

one of the following:

• Press the door lock button.

OXM049110

OAM049041

Lighting control

Parking light position (

)

• Press the unlock button twice within 4

seconds.

When the light switch is in the parking

light position (1st position), the tail, posi-

tion, license and instrument panel lights

will turn ON.

The light switch has a Headlight and a

Parking light position.

• Press the unlock button once more

after 4 seconds.

To operate the lights, turn the knob at the

end of the control lever to one of the fol-

lowing positions:

(1) OFF position

(2) Parking light position

(3) Headlight position

(4) Auto light position (if equipped)

4 50

Features of your vehicle

CAUTION

• Never place anything over sensor

(1) located on the instrument

panel. This will ensure better

auto-light system control.

• Don’t clean the sensor using a

window cleaner. The cleaner may

leave a light film which could

interfere with sensor operation.

• If your vehicle has window tint or

other types of metallic coating on

the front windshield, the Auto

light system may not work prop-

erly.

OAM049042

OLM049328

Auto light position (if equipped)

Headlight position (

)

When the light switch is in the AUTO light

position, the taillights and headlights will

be turn ON or OFF automatically

depending on the amount of light outside

the vehicle.

When the light switch is in the headlight

position (2nd position), the head, tail,

position, license and instrument panel

lights will turn ON.

✽

NOTICE

The ignition switch must be in the ON

position to turn on the headlights.

4 51

Features of your vehicle

OAM049044

OAM049043

OAM049045

To flash the headlights, pull the lever

towards you. It will return to the normal

(low beam) position when released. The

headlight switch does not need to be on

to use this flashing feature.

High beam operation

Turn signals and lane change sig-

nals

To turn on the high beam headlights,

push the lever away from you. Pull it back

for low beams.

The ignition switch must be on for the

turn signals to function. To turn on the

turn signals, move the lever up or down

(A). The green arrow indicators on the

instrument panel indicate which turn sig-

nal is operating. They will self-cancel

after a turn is completed. If the indicator

continues to flash after a turn, manually

return the lever to the OFF position.

The high beam indicator will light when

the headlight high beams are switched

on.

To prevent the battery from being dis-

charged, do not leave the lights on for a

prolonged time while the engine is not

running.

4 52

Features of your vehicle

To signal a lane change, move the turn

signal lever slightly and hold it in position

(B). The lever will return to the OFF posi-

tion when released.

If an indicator stays on and does not

flash or if it flashes abnormally, one of the

turn signal bulbs may be burned out and

will require replacement.

One-touch lane change function

(if equipped)

To activate an one-touch lane change

function, move the turn signal lever

slightly for less than 0.5 second and then

release it. The lane change signals will

blink 3 times.

OAM049046

Front fog light (if equipped)

Fog lights are used to provide improved

visibility when visibility is poor due to fog,

rain or snow, etc. The fog lights will turn

on when fog light switch (1) is turned to

ON after the headlights (low beam) are

turned on.

✽

NOTICE

If an indicator flash is abnormally quick

or slow, a bulb may be burned out or

have a poor electrical connection in the

circuit.

To turn off the fog lights, turn the switch

to OFF.

CAUTION

When in operation, the fog lights

consume large amounts of vehicle

electrical power. Only use the fog

lights when visibility is poor.

4 53

Features of your vehicle -> LIGHTING for Your Hyundai Ix35 SUV First Generation (2009-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals