Get Convenient features of your vehicle -> Automatic Climate Control System Guide for Hyundai Ix35 SUV Second Generation (2016-2023)

Convenient features of your vehicle

AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

■ Type A

1. AUTO (automatic control) button

2. Driver's temperature control knob

3. A/C display

4. Passenger's temperature control knob

5. Dual temperature control selection button

6. OFF button

7. Front windshield defroster button

8. Air conditioning button (if equipped)

9. Fan speed control switch

10. Air intake control button

11. Mode selection button

■ Type B

CAUTION

Operating the blower when the

ignition switch is in the ON

position could cause the bat-

tery to discharge. Operate the

blower when the engine is run-

ning.

OLMB043126/OLMB043126R

3-114

Automatic heating and air con-

ditioning

✽

NOTICE

•

To turn the automatic operation

off, select any button or switch of

the following:

- Mode selection button

- Air conditioning button

- Front windshield defroster button

- Air intake control button

- Fan speed control switch

The selected function will be con-

trolled manually while other func-

tions operate automatically.

3

OLMB043122

•

For

your

convenience

and

to

2. Set the Driver’s temperature con-

trol switch to the desired tempera-

ture.

improve the effectiveness of the

climate control, use the AUTO

button and set the temperature to

23°C/73°F.

OLMB043121

1. Press the AUTO button.

The modes, fan speeds, air intake

and air-conditioning will be controlled

automatically by setting the tempera-

ture.

3-115

Convenient features of your vehicle

Mode selection

Manual heating and air condi-

tioning

The heating and cooling system can

be controlled manually by pressing

buttons or turning knob(s) other than

the AUTO button. In this case, the

system works sequentially according

to the order of buttons or knob(s)

selected.

1. Start the engine.

2. Set the mode to the desired posi-

tion.

OLMB043123

✽

NOTICE

OLMB043124

For improving the effectiveness of

heating and cooling;

Never place anything over the sen-

sor located on the instrument panel

to ensure better control of the heat-

ing and cooling system.

The mode selection button controls

the direction of the air flow through

the ventilation system.

- Heating:

- Cooling:

The air flow outlet port is converted

as follows:

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air position.

5. Set the fan speed control to the

desired speed.

Refer to the illustration in the

“Manual climate control system”.

6. If air conditioning is desired, turn

the air conditioning system on.

Press the AUTO button in order to

convert to full automatic control of

the system.

3-116

Face-Level

Floor-Level

Air flow is directed toward the upper Most of the air flow is directed to the

body and face. Additionally, each floor, with a small amount of the air

outlet can be controlled to direct the being directed to the windshield and

air discharged from the outlet.

side window defrosters.

3

Bi-Level

Floor/Defrost-Level

OLMB043125

Defrost-Level

Air flow is directed towards the face Most of the air flow is directed to the

Most of the air flow is directed to the

windshield with a small amount of air

directed to the side window defrosters.

and the floor.

floor and the windshield with a small

amount directed to the side window

defrosters.

3-117

Convenient features of your vehicle

When turning the knob, the tempera-

ture will increase or decrease by

0.5°C/1°F.

Temperature control

■ Type A

OLMB043109

OLMB043126

■ Type B

Instrument panel vents

The outlet vents can be opened or

closed separately using the thumb-

wheel.

Also, you can adjust the direction of

air delivery from these vents using

the vent control lever as shown.

OLMB043126R

The temperature will increase to the

maximum (HI) by turning the knob to

the right extremely.

The temperature will decrease to the

minimum (Lo) by turning the knob to

the left extremely.

3-118

When the driver side temperature is

set to the highest (HIGH) or lowest

(LOW) temperature, the DUAL mode

deactivates for maximum heating or

cooling.

Adjusting the driver and passenger

side temperature equally

1. Press the DUAL button again to

deactivate DUAL mode. The pas-

senger side temperature will be

set to the same temperature as

the driver side.

3

2. Operate the driver side tempera-

ture control button. The driver and

passenger side temperature will

be adjusted equally.

OLMB043127

Adjusting the driver and passenger

side temperature individually

Temperature conversion

You can switch the temperature

mode between Centigrade to

Fahrenheit as follows:

1. Press the DUAL button to operate

the driver and passenger side

temperature individually. Also, if

the passenger side temperature

control button is operated, it will

automatically change to the DUAL

mode as well.

While pressing the OFF button,

press the AUTO button for 3 seconds

or more.

The display will change from

Centigrade to Fahrenheit, or from

Fahrenheit to Centigrade.

2. Operate the driver side temperature

control to adjust the driver side tem-

perature. Operate the passenger

side temperature control to adjust

the passenger side temperature.

3-119

Convenient features of your vehicle

Recirculated air position

Air intake control

Outside thermometer

With the recirculated air

position selected, air

from the passenger

compartment will be

drawn through the heat-

ing system and heated

or cooled according to

the function selected.

Outside (fresh) air position

With the outside (fresh)

air position selected, air

enters the vehicle from

outside and is heated or

cooled according to the

function selected.

OLMB043128

OLMB043129

The air intake control is used to

select the outside (fresh) air position

or recirculated air position.

The current outside temperature is

displayed in 1°C (1°F) increments.

The temperature range is between

-40°C ~ 60°C (-40°F ~ 140°F).

To change the air intake control posi-

tion, press the control button.

• The outside temperature on the

display may not change immedi-

ately like a general thermometer to

prevent the driver from being inat-

tentive.

3-120

Fan speed control

✽

NOTICE

WARNING

Prolonged operation of the heater in

the recirculated air position (with-

out air conditioning selected) may

cause fogging of the windshield and

side windows and the air within the

• Continue using the climate

control system in the recircu-

lated air position may allow

humidity to increase inside

the vehicle which may fog the

glass and obscure visibility.

passenger

become stale.

compartment

may

3

In addition, prolonged use of the air

conditioning with the recirculated

air position selected will result in

excessively dry air in the passenger

compartment.

• Do not sleep in a vehicle with

the air conditioning or heating

system on. It may cause seri-

ous harm or death due to a

drop in the oxygen level

and/or body temperature.

OLMB043130

The fan speed can be set to the

desired speed by operating the fan

speed control switch.

• Continue using the climate

control system in the recircu-

lated air position can cause

drowsiness or sleepiness, and

loss of vehicle control. Set the

air intake control to the outside

(fresh) air position as much as

possible while driving.

To change the fan speed, press (

the switch for higher speed, or push

) the switch for lower speed. To

ꢀ)

(ꢁ

turn the fan speed control off, press

the front blower OFF button.

3-121

Convenient features of your vehicle

Air conditioning

OFF mode

System operation

Ventilation

1. Set the mode to the

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

OLMB043131

OLMB043132

1. Set the mode to the

position.

Press the A/C button to turn the air Press the front blower OFF button to

conditioning system on (indicator turn off the front air climate control

2. Set the air intake control to the

outside (fresh) air position.

light will illuminate).

system. However, you can still oper-

ate the mode and air intake buttons

as long as the ignition switch is in the

ON position.

3. Set the temperature control to the

desired position.

Press the button again to turn the air

conditioning system off.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system (if

equipped) on.

• If the windshield fogs up, set the

mode to the

or

position.

3-122

Operation Tips

Air conditioning (if equipped)

✽

NOTICE

• To keep dust or unpleasant fumes

from entering the vehicle through

the ventilation system, temporarily

set the air intake control to the

recirculated air position. Be sure to

return the control to the fresh air

position when the irritation has

passed to keep fresh air in the

vehicle.This will help keep the driv-

er alert and comfortable.

HYUNDAI Air Conditioning Systems

are filled with environmentally friendly

R-134a refrigerant.

•

When using the air conditioning

system, monitor the temperature

gauge closely while driving up

hills or in heavy traffic when out-

side temperatures are high. Air

1. Start the engine. Push the air con-

ditioning button.

conditioning

system

operation

2. Set the mode to the

position.

may cause engine overheating.

Continue to use the blower fan but

turn the air conditioning system

off if the temperature gauge indi-

cates engine overheating.

When opening the windows in

humid weather air conditioning

may create water droplets inside

the vehicle. Since excessive water

droplets may cause damage to

electrical equipment, air condi-

tioning should only be used with

the windows closed.

3

3. Set the air intake control to the out-

side air or recirculated air position.

4. Adjust the fan speed control and

temperature control to maintain

maximum comfort.

• Air for the heating/cooling system

is drawn in through the grilles just

ahead of the windshield. Care

should be taken that these are not

blocked by leaves, snow, ice or

other obstructions.

•

• To prevent interior fog on the wind-

shield, set the air intake control to

the fresh air position and fan speed

to the desired position, turn on the

air conditioning system, and adjust

the temperature control to desired

temperature.

3-123

Convenient features of your vehicle

Air conditioning system operation

tips

• When using the air conditioning

system, you may notice clear water

dripping (or even puddling) on the

ground under the passenger side

of the vehicle. This is a normal sys-

tem operation characteristic.

Climate control air filter

• If the vehicle has been parked in

direct sunlight during hot weather,

open the windows for a short time

to let the hot air inside the vehicle

escape.

Outside air

Recirculated

air

• Operating the air conditioning sys-

tem in the recirculated air position

provides maximum cooling, how-

ever, continual operation in this

mode may cause the air inside the

vehicle to become stale.

• Use air conditioning to reduce

humidity and moisture inside the

vehicle on rainy or humid days.

Blower

• During air conditioning system

operation, you may occasionally

notice a slight change in engine

speed as the air conditioning com-

pressor cycles. This is a normal

system operation characteristic.

Heater core

Climate control

air filter

Evaporator

core

• During cooling operation, you may

occasionally notice a misty air flow

because of rapid cooling and

humid air intake. This is a normal

system operation characteristic.

1LDA5047

The climate control air filter installed

behind the glove box filters the dust

or other pollutants that come into the

vehicle from the outside through the

heating and air conditioning system.

If dust or other pollutants accumulate

in the filter over a period of time, the

air flow from the air vents may

decrease, resulting in moisture accu-

mulation on the inside of the wind-

shield even when the outside (fresh)

air position is selected. If this hap-

pens, we recommend that the cli-

mate control air filter be replaced by

an authorized HYUNDAI dealer.

• Use the air conditioning system

every month only for a few minutes

to ensure maximum system per-

formance.

3-124

Checking the amount of air

conditioner refrigerant and

compressor lubricant

✽

NOTICE

Replace the filter according to the

Maintenance Schedule.

If the car is being driven in severe

conditions such as dusty, rough

roads, more frequent climate con-

WARNING

•

Vehicles equipped with R-134a

When the amount of refrigerant is

low, the performance of the air con-

ditioning is reduced. Overfilling also

has a bad influence on the air condi-

tioning system.

Because the refriger-

ant is at very high

pressure, the air con-

trol

air

filter

inspections

and

ditioning

system

changes are required.

3

should only be serv-

iced by trained and certified

technicians. It is important that

the correct type and amount of

oil and refrigerant is used.

•

When the air flow rate suddenly

decreases, we recommend that the

system be checked by an author-

ized HYUNDAI dealer.

Therefore, if abnormal operation is

found, we recommend that the sys-

tem be inspected by an authorized

HYUNDAI dealer.

Otherwise, it may cause damage

to the vehicle and personal injury.

3-125

Convenient features of your vehicle -> Automatic Climate Control System for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals