Get Convenient features of your vehicle -> Lighting Guide for Hyundai Ix35 SUV Second Generation (2016-2023)

Convenient features of your vehicle

LIGHTING

Battery saver function

Headlight (Headlamp) escort

function (if equipped)

CAUTION

• The purpose of this feature is to

prevent the battery from being dis-

charged. The system automatically

turns off the parking lights when

the driver removes the ignition key

and opens the driver- side door.

The headlights (and/or taillights)

remain on for approximately 5 min-

utes after the ignition key is removed

or turned to the ACC or LOCK posi-

tion. However, if the driver’s door is

opened and closed, the headlights

are turned off after 15 seconds.

If the driver gets out of the vehi-

cle through other doors (except

driver’s door), the battery saver

function does not operate.

Therefore, it causes the battery

to be discharged. In this case,

make sure to turn off the lamp

before getting out of the vehicle.

• With this feature, the parking lights

will be turned off automatically if

the driver parks on the side of road

at night.

The headlights can be turned off by

pressing the lock button on the trans-

mitter or smart key twice or turning

off the light switch from the headlight

or Auto light position.

If necessary, to keep the lights on

when the ignition key is removed,

perform the following :

1) Open the driver-side door.

2) Turn the parking lights OFF and

ON again using the light switch

on the steering column.

3-88

Lighting control

Parking light position (

)

Headlight position ( )

3

OLMB043257

OLMB043258

OLMB043259

The light switch has a Headlight and When the light switch is in the park-

When the light switch is in the head-

light position the head, tail, position,

license and instrument panel lights

are ON.

a Parking light position.

ing light position, the tail, position,

license and instrument panel lights

are ON.

To operate the lights, turn the knob at

the end of the control lever to one of

the following positions:

(1) OFF position

✽

NOTICE

The ignition switch must be in the ON

position to turn on the headlights.

(2) Parking light position

(3) Headlight position

(4) Auto light position (if equipped)

3-89

Convenient features of your vehicle

Auto light position (if equipped)

High - beam operation

CAUTION

• Never place anything over the

sensor (1) located on the

instrument panel, this will

ensure better auto-light system

control.

• Don’t clean the sensor using a

window cleaner, the cleaner

may leave a light film which

could interfere with sensor

operation.

OLMB043260

OLMB043262

• If your vehicle has window tint

or other types of coating on

the front windshield, the Auto

light system may not work

properly.

When the light switch is in the AUTO

light position, the taillights and head-

lights will be turned ON or OFF auto-

matically depending on the amount

of light outside the vehicle.

1. Turn the light switch to the head-

light position.

2. Push the lever away from you.

✽

NOTICE

•

The high-beam indicator will light

when the headlight high beams are

switched on.

To prevent the battery from being

discharged, do not leave the lights

on for a prolonged time while the

engine is not running.

3-90

Flashing headlights

Turn signals and lane change

signals

WARNING

Do not use high beam when

there are other vehicles. Using

high beam could obstruct the

other driver's vision.

3

OLMB043261

OLMB043263

Pull the lever towards you. It will

return to the normal position when

released. The headlight switch does

not need to be on to use this flashing

feature.

The ignition switch must be on for the

turn signals to function. To turn on

the turn signals, move the lever up or

down (A). Green arrow indicators on

the instrument panel indicate which

turn signal is operating.

They will self-cancel after a turn is

completed. If the indicator continues

to flash after a turn, manually return

the lever to the OFF position.

To signal a lane change, move the

turn signal lever slightly and hold it in

position (B). The lever will return to

the OFF position when released.

3-91

Convenient features of your vehicle

If an indicator stays on and does not

flash or if it flashes abnormally, one of

the turn signal bulbs may be burned

out and will require replacement.

Front fog light (if equipped)

CAUTION

When in operation, the fog lights

consume large amounts of vehi-

cle electrical power. Only use the

fog lights when visibility is poor.

One-touch lane change function

(if equipped)

To activate an one-touch lane

change function, move the turn sig-

nal lever slightly and then release it.

The lane change signals will blink 3

times.

OLMB043264

✽

Fog lights are used to provide

improved visibility when visibility is

poor due to fog, rain or snow, etc.

NOTICE

If an indicator flash is abnormally

quick or slow, bulb may be burned

out or have a poor electrical connec-

tion in the circuit.

1. Turn on the park light.

2. Turn the light switch (1) to the front

fog light position.

3. To turn off the front fog light, turn

the light switch to the front fog light

position again or turn off the park

light.

3-92

• Position the light switch in the

headlight position and then turn

the light switch (1) to the rear fog

light position.

Rear fog light (if equipped)

Daytime running light

(if equipped)

■ Type A

Daytime Running Lights (DRL) can

make it easier for others to see the

front of your vehicle during the day.

DRL can be helpful in many different

driving conditions, and it is especially

helpful after dawn and before sunset.

• Position the light switch in the park

light, turn the light switch to the

front fog light (if equipped) position,

and then turn the light switch (1) to

the rear fog light position.

3

The DRL system will turn off the ded-

icated lamp when:

To turn the rear fog lights off, do one

of the following:

1. The front fog light or headlight (low

beam) switch is ON.

OLMB043303

■ Type B

• Turn off the headlight switch.

2. The engine is OFF.

• Turn the light switch to the rear fog

light position again.

• When the light switch in the park

light, if you turn off the front fog light,

the rear fog light will also turn off.

OLMB043304

To turn on the rear fog lights, do one

of the following:

3-93

Convenient features of your vehicle

To adjust the headlight beam level

according to the number of the pas-

sengers and the loading weight in

the luggage area, turn the beam lev-

eling switch.

Headlight leveling device

(if equipped)

Manual type

■ Left-Hand drive type

The higher the number of the switch

is positioned, the lower the headlight

beam level. Always keep the head-

light beam at the proper leveling

position, or headlights may dazzle

other road users.

Listed below are the examples of prop-

er switch settings. For loading condi-

tions other than those listed below,

adjust the switch position so that the

beam level may be the nearest as the

condition obtained according to the list.

OLMB043305

■ Right-Hand drive type

Loading condition

Driver only

Switch position

0

Driver + Front passenger

Full passengers

(including driver)

1

2

3

Full passengers (including

driver) + Maximum permis-

sible loading

OLMB043305R

Driver + Maximum permis-

sible loading

3-94

Convenient features of your vehicle -> Lighting for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals