Get Convenient features of your vehicle -> Manual Climate Control System Guide for Hyundai Ix35 SUV Second Generation (2016-2023)

Convenient features of your vehicle

MANUAL CLIMATE CONTROL SYSTEM (IF EQUIPPED)

■ Type A

1. Fan speed control knob

2. Front windshield defroster button

3. MAX A/C selection button (if equipped)

4. Temperature control knob

5. Air conditioning button (if equipped)

6. Mode selection button

7. Air intake control button

■ Type B

CAUTION

Operating the blower when the

ignition switch is in the ON

position could cause the bat-

tery to discharge. Operate the

blower when the engine is run-

ning.

OLMB043104/OLMB043105

3-104

Heating and air conditioning

1. Start the engine.

2. Set the mode to the desired position.

For improving the effectiveness of

heating and cooling;

- Heating:

- Cooling:

3

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system (if

equipped) on.

OLMB043106

3-105

Convenient features of your vehicle

Floor/Defrost-Level

(A, C, D, E)

Mode selection

Face-Level (B, D)

Most of the air flow is directed to the

floor and the windshield with a small

amount directed to the side window

defrosters.

Air flow is directed toward the upper

body and face. Additionally, each

outlet can be controlled to direct the

air discharged from the outlet.

Defrost-Level (A, D)

Bi-Level (B, C, D, E)

OLMB043107

Most of the air flow is directed to the

windshield with a small amount of air

directed to the side window

defrosters.

Air flow is directed towards the face

and the floor.

The mode buttons control the direc-

tion of the air flow through the venti-

lation system.

Air can be directed to the floor, dash-

board outlets, or windshield. Five

symbols are used to represent Face,

Bi-Level, Floor, Floor-Defrost and

Defrost air position.

Floor-Level (A, C, E, D)

Most of the air flow is directed to the

floor, with a small amount of the air

being directed to the windshield and

side window defrosters.

3-106

Temperature control

■ Type A

3

OLMB043110

OLMB043108

OLMB043109

■ Type B

MAX A/C-Level (if equipped)

Instrument panel vents

To select the MAX A/C, turn the fan The outlet vents can be opened or

speed control knob to the right then closed separately using the thumb-

press the MAX A/C button.

wheel.

Air flow is directed toward the upper Also, you can adjust the direction of

body and face.

air delivery from these vents using

the vent control lever as shown.

In this mode, the air conditioning and

the recirculated air position will be

selected automatically.

OLMB043111

The temperature control knob allows

you to control the temperature of the

air flowing from the ventilation system.

To change the air temperature in the

passenger compartment, turn the

knob to the right position for warm and

hot air or left position for cooler air.

3-107

Convenient features of your vehicle

Recirculated air position

Air intake control

✽

NOTICE

■ Type A

With the recirculated air

Prolonged operation of the heater in

the recirculated air position (with-

out air conditioning selected) may

cause fogging of the windshield and

side windows and the air within the

■ Type A

position selected, air

from the passenger

compartment will be

drawn through the heat-

ing system and heated

or cooled according to

the function selected.

■ Type B

passenger

compartment

may

become stale. In addition, prolonged

use of the air conditioning with the

recirculated air position selected will

result in excessively dry air in the

passenger compartment.

OLMB043112

Outside (fresh) air position

■ Type B

■ Type A

With the outside (fresh)

air position selected, air

enters the vehicle from

outside and is heated or

cooled according to the

function selected.

■ Type B

OLMB043113

The air intake control is used to

select the outside (fresh) air position

or recirculated air position.

To change the air intake control posi-

tion, press the control button.

3-108

The fan speed control knob allows

you to control the fan speed of the air

flowing from the ventilation system.

To change the fan speed, turn the

knob to the right for higher speed or

left for lower speed.

Fan speed control

WARNING

■ Type A

• Continue using the climate

control system in the recircu-

lated air position may allow

humidity to increase inside

the vehicle which may fog the

glass and obscure visibility.

Setting the fan speed control knob to

the “0” position turns off the fan.

3

• Do not sleep in a vehicle with

the air conditioning or heating

system on. It may cause seri-

ous harm or death due to a

drop in the oxygen level

and/or body temperature.

OLMB043114

■ Type B

• Continue using the climate

control system in the recircu-

lated air position can cause

drowsiness or sleepiness, and

loss of vehicle control. Set the

air intake control to the outside

(fresh) air position as much as

possible while driving.

OLMB043115

The ignition switch must be in the ON

position for fan operation.

3-109

Convenient features of your vehicle

To turn off the blowers

Air conditioning (if equipped)

System operation

Ventilation

■ Type A

1. Set the mode to the

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

OLMB043116

Heating

■ Type B

OLMB043118

1. Set the mode to the

position.

Press the A/C button to turn the air

conditioning system on (indicator light

will illuminate). Press the button again

to turn the air conditioning system off.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system (if

equipped) on.

OLMB043117

To turn off the blowers, turn the fan

speed control knob to the "0" position.

• If the windshield fogs up, set the

mode to the

or

position.

3-110

Operation Tips

Air conditioning (if equipped)

✽

NOTICE

• To keep dust or unpleasant fumes

from entering the vehicle through

the ventilation system, temporarily

set the air intake control to the

recirculated air position. Be sure to

return the control to the fresh air

position when the irritation has

passed to keep fresh air in the

vehicle.This will help keep the driv-

er alert and comfortable.

HYUNDAI Air Conditioning Systems

are filled with environmentally friendly

R-134a refrigerant.

•

When using the air conditioning

system, monitor the temperature

gauge closely while driving up

hills or in heavy traffic when out-

side temperatures are high. Air

1. Start the engine. Push the air con-

ditioning button.

conditioning

system

operation

2. Set the mode to the

position.

may cause engine overheating.

Continue to use the blower fan but

turn the air conditioning system

off if the temperature gauge indi-

cates engine overheating.

When opening the windows in

humid weather air conditioning

may create water droplets inside

the vehicle. Since excessive water

droplets may cause damage to

electrical equipment, air condi-

tioning should only be used with

the windows closed.

3

3. Set the air intake control to the out-

side air or recirculated air position.

4. Adjust the fan speed control and

temperature control to maintain

maximum comfort.

• Air for the heating/cooling system

is drawn in through the grilles just

ahead of the windshield. Care

should be taken that these are not

blocked by leaves, snow, ice or

other obstructions.

•

• To prevent interior fog on the wind-

shield, set the air intake control to

the fresh air position and fan speed

to the desired position, turn on the

air conditioning system, and adjust

the temperature control to desired

temperature.

3-111

Convenient features of your vehicle

Air conditioning system operation

tips

• When using the air conditioning

system, you may notice clear water

dripping (or even puddling) on the

ground under the passenger side

of the vehicle. This is a normal sys-

tem operation characteristic.

Climate control air filter

• If the vehicle has been parked in

direct sunlight during hot weather,

open the windows for a short time

to let the hot air inside the vehicle

escape.

Outside air

Recirculated

air

• Operating the air conditioning sys-

tem in the recirculated air position

provides maximum cooling, how-

ever, continual operation in this

mode may cause the air inside the

vehicle to become stale.

• Use air conditioning to reduce

humidity and moisture inside the

vehicle on rainy or humid days.

Blower

• During air conditioning system

operation, you may occasionally

notice a slight change in engine

speed as the air conditioning com-

pressor cycles. This is a normal

system operation characteristic.

Heater core

Climate control

air filter

Evaporator

core

• During cooling operation, you may

occasionally notice a misty air flow

because of rapid cooling and

humid air intake. This is a normal

system operation characteristic.

1LDA5047

The climate control air filter installed

behind the glove box filters the dust

or other pollutants that come into the

vehicle from the outside through the

heating and air conditioning system.

If dust or other pollutants accumulate

in the filter over a period of time, the

air flow from the air vents may

decrease, resulting in moisture accu-

mulation on the inside of the wind-

shield even when the outside (fresh)

air position is selected. If this hap-

pens, we recommend that the cli-

mate control air filter be replaced by

an authorized HYUNDAI dealer.

• Use the air conditioning system

every month only for a few minutes

to ensure maximum system per-

formance.

3-112

Checking the amount of air

conditioner refrigerant and

compressor lubricant

✽

NOTICE

Replace the filter according to the

Maintenance Schedule.

If the car is being driven in severe

conditions such as dusty, rough

roads, more frequent climate con-

WARNING

•

Vehicles equipped with R-134a

When the amount of refrigerant is

low, the performance of the air con-

ditioning is reduced. Overfilling also

has a bad influence on the air condi-

tioning system.

Because the refriger-

ant is at very high

pressure, the air con-

trol

air

filter

inspections

and

ditioning

system

changes are required.

3

should only be serv-

iced by trained and certified

technicians. It is important that

the correct type and amount of

oil and refrigerant is used.

•

When the air flow rate suddenly

decreases, we recommend that the

system be checked by an author-

ized HYUNDAI dealer.

Therefore, if abnormal operation is

found, we recommend that the sys-

tem be inspected by an authorized

HYUNDAI dealer.

Otherwise, it may cause damage

to the vehicle and personal injury.

3-113

Convenient features of your vehicle -> Manual Climate Control System for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals