2016-2023 Hyundai Ix35 SUV Convenient features of your vehicle -> Windshield Defrosting and Defogging User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Convenient features of your vehicle -> Windshield Defrosting and Defogging for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Convenient features of your vehicle  
WINDSHIELD DEFROSTING AND DEFOGGING  
• For maximum defrosting, set the  
Manual climate control system  
WARNING  
temperature control to the extreme  
right/hot position and the fan speed  
control to the highest speed.  
To defog inside windshield  
Type A  
Windshield heating  
Do not use the  
or  
posi-  
• If warm air to the floor is desired  
while defrosting or defogging, set  
the mode to the floor-defrost posi-  
tion.  
tion during cooling operation in  
extremely humid weather. The  
difference between the temper-  
ature of the outside air and the  
windshield could cause the  
outer surface of the windshield  
to fog up, causing loss of visi-  
bility. In this case, set the mode  
• Before driving, clear all snow and  
ice from the windshield, rear win-  
dow, outside rear view mirrors, and  
all side windows.  
• Clear all snow and ice from the  
hood and air inlet in the cowl grill to  
improve heater and defroster effi-  
ciency and to reduce the probabili-  
ty of fogging up the inside of the  
windshield.  
selection to the  
and fan speed control to the  
lower speed.  
position  
OLMB043133  
Type B  
OLMB043134  
3-126  
1. Set the fan speed to the desired  
position.  
1. Set the temperature to the  
extreme hot position.  
To defrost outside windshield  
Type A  
2. Select desired temperature.  
2. Set the fan speed to the highest  
position.  
3. Select the  
or  
position.  
3. Select the  
position.  
4. The outside (fresh) air will be  
selected automatically. If the  
position is selected, air condition-  
ing (if equipped) will also be  
selected automatically.  
4. The outside (fresh) air and air con-  
ditioning (if equipped) will be  
selected automatically.  
3
If the air conditioning (if equipped)  
and/or outside (fresh) air position are  
not selected automatically, press the  
corresponding button manually.  
OLMB043135  
Type B  
OLMB043136  
3-127  
Convenient features of your vehicle  
If the air conditioning and outside  
(fresh) air position are not selected  
automatically, adjust the correspon-  
To defrost outside windshield  
Automatic climate control sys-  
tem  
To defog inside windshield  
ding button manually. If the  
posi-  
tion is selected, lower fan speed is  
adjusted to a higher fan speed.  
OLMB043138  
1. Set the fan speed to the highest  
position.  
OLMB043137  
2. Set the temperature to the  
extreme hot (HI) position.  
1. Set the fan speed to the desired  
position.  
3. Press the defroster button (  
).  
2. Select desired temperature.  
4. The air conditioning will turn on  
according to the detected ambient  
temperature and outside (fresh)  
air position will be selected auto-  
matically.  
3. Press the defroster button (  
).  
4. The air conditioning will turn on  
according to the detected ambient  
temperature and outside (fresh)  
air position will be selected auto-  
matically.  
3-128  
1. Turn the ignition switch to the ON  
position.  
Manual climate control system  
Defogging logic  
To reduce the possibility of fogging  
up the inside of the windshield, the  
air intake or air conditioning (if  
equipped) are controlled automati-  
cally according to certain conditions  
Type A  
2. Turn the mode selection knob to  
the defrost position (  
).  
3. Press the air intake control button  
at least 5 times within 3 seconds.  
such as  
or  
position.To cancel  
The indicator light in the air intake  
control button will blink 3 times with  
0.5 second of interval. It indicates that  
the defogging logic is canceled or  
returned to the programmed status.  
3
or return to the defogging logic, do  
the following.  
OLMB043139  
If the battery has been discharged or  
disconnected, it resets to the defog  
logic status.  
Type B  
OLMB043140  
3-129  
Convenient features of your vehicle  
CLEAN AIR (IF EQUIPPED)  
If the battery has been discharged or  
disconnected, it resets to the defog  
logic status.  
Automatic climate control sys-  
tem  
OLM044353  
When the ignition switch is in the ON  
position, the clean air function turns  
on automatically.  
OLMB043141  
1. Turn the ignition switch to the ON  
position.  
Also, the clean air function turns off  
automatically, when the ignition  
switch turns to the OFF position.  
2. Select the defroster position press-  
ing the defroster button (  
).  
3. While pressing the air conditioning  
button (A/C), press the air intake  
control button (Recirculated air  
button) at least 5 times within 3  
seconds.  
The A/C display blinks 3 times with  
0.5 second of interval. It indicates that  
the defogging logic is canceled or  
returned to the programmed status.  
3-130  

Related Topics

Popular Owner Manuals