Get Convenient features of your vehicle -> Mirrors Guide for Hyundai Ix35 SUV Second Generation (2016-2023)

MIRRORS

Inside rearview mirror

Day/night rearview mirror

(if equipped)

WARNING

Adjust the rearview mirror so that the

center view through the rear window

is seen. Make this adjustment before

you start driving.

Do not adjust the rearview mir-

ror while the vehicle is moving.

This could result in loss of con-

trol, and an accident which

could cause death, serious

injury or property damage.

WARNING

3

Night

Rear visibility

Do not place objects in the rear

seat or cargo area which would

interfere with your vision out

the rear window.

WARNING

Do not modify the inside mirror

and do not install a wide mirror.

It could result in injury, during

an accident or deployment of

the air bag.

Day

OLMB043233

Make this adjustment before you

start driving and while the day/night

lever is in the day position.

Pull the day/night lever toward you to

reduce glare from the headlights of

vehicles behind you during night

driving.

Remember that you lose some

rearview clarity in the night position.

3-43

Convenient features of your vehicle

■ Type A

• Press the on/off button (1) to turn

the automatic dimming function on.

The mirror indicator light will illumi-

nate.

Electric chromic mirror (ECM)

(if equipped)

The electric rearview mirror automati-

cally controls the glare from the head-

lights of the car behind you in night-

time or low light driving conditions.The

sensor mounted in the mirror senses

the light level around the vehicle, and

automatically controls the headlight

glare from vehicles behind you.

Press the on/off button to turn the

automatic dimming function off.The

mirror indicator light will turn off.

• The mirror defaults to the ON posi-

tion whenever the ignition switch is

turned on.

Indicator

OLMB043008

When the engine is running, the glare

is automatically controlled by the sen-

sor mounted in the rearview mirror.

■ Type B

Rearview display

Whenever the shift lever is shifted

into R (Reverse), the mirror will auto-

matically go to the brightest setting in

order to improve the drivers view

behind the vehicle.

Indicator

Sensor

CAUTION

OLMB043301

To operate the electric rearview

mirror:

When cleaning the mirror, use a

paper towel or similar material

dampened with glass cleaner.

Do not spray glass cleaner

directly on the mirror as that

may cause the liquid cleaner to

enter the mirror housing.

3-44

1. To operate Compass feature

2. Calibration procedure

Electric chromic mirror (ECM)

with compass

Press and release the compass but- Press and hold the button for more

ton, then the vehicle's directional than 6 but less than 9 seconds.When

heading will be displayed. Pressing the compass memory is cleared a "C"

and releasing the button again will will appear in the display.

turn off the display.

- Driving the vehicle in a circle at

less than 8km/h 2 times or until the

compass heading appears.

3

Heading display

- E : East

- Driving in a circle in right-handed

direction and opposite direction are

possible, and if the calibration is

completed, the compass heading

will appear.

- W : West

- S : South

- N : North

OLMB043302

ex) NE : North East

1. Feature Control Button

2. Status Indicator LED

3. Rear Light Sensor

4. Display Window

- Keep driving in a circle until a com-

pass heading appears.

Automatic dimming rear view mirror

controls automatically the glare of

headlights of the vehicle behind you

when it turned on by pressing and

holding the button for more than 3

but less than 6 seconds. It is turned

off by pressing and holding the but-

ton for same time once more.

3-45

Convenient features of your vehicle

3. Setting the compass zone

Asia

3. Press the button until the new zone

number appears in the display.

After you stop pressing the button

in, the display will show a compass

direction within a few seconds.

1. Find your current location and

variance zone number on the

zone map.

Europe

4. Changing Mirror Angle setting

(if equipped):

Due to mirror positions being angled

towards the driver, the compass mir-

ror can also compensate for drivers

seated on the Left Hand side of the

vehicle (steering wheel on the LH

side of the vehicle) or Right Hand

side of the vehicle (steering wheel on

the RH side of the vehicle).

B520C03JM

South America

B520C01JM

Africa

To adjust the Left Hand, “L” or Right

Hand, “R”, setting:

1. Press and hold the button for more

than 9 seconds.

2. Release then press the button to

toggle between “L” and “R”.

B520C04JM

2. Press and hold the button for more

than 3 but less than 6 seconds.

The current zone number will

appear in the display.

B520C05JM

3-46

✽

NOTICE

This procedure also causes the com-

pass to be de-calibrated.

(Continued)

CAUTION

4. When cleaning the mirror,

use a paper towel or similar

material dampened with

glass cleaner. Do not spray

glass cleaner directly on the

mirror as that may cause the

liquid cleaner to enter the

mirror housing.

1. Do not install the ski rack,

antenna, etc. which are

attached to the vehicle by

means of a magnet.They affect

the operation of the compass.

3. To re-calibrate the compass, drive

the vehicle in 2 complete circles at

less than 8km/h (5mph).

3

2. If the compass deviates from

the correct indication soon

after repeated adjustment, we

recommend that you have the

compass checked at an

authorized HYUNDAI dealer.

3. The compass may not indi-

cate the correct compass

point in tunnels or while driv-

ing up or down a steep hill.

(The compass returns to the

correct compass point when

the vehicle moves to an area

where the geomagnetism is

stabilized.)

(Continued)

3-47

Convenient features of your vehicle

Outside rearview mirror

WARNING

CAUTION

Be sure to adjust mirror angles

before driving.

Do not scrape ice off the mirror

face; this may damage the sur-

face of the glass. If ice should

restrict movement of the mirror,

do not force the mirror for

adjustment. To remove ice, use

a deicer spray, or a sponge or

soft cloth with very warm water.

Do not adjust or fold the outside

rearview mirrors while the vehi-

cle is moving.This could result in

loss of control, and an accident

which could cause death, seri-

ous injury or property damage.

Your vehicle is equipped with both

left-hand and right-hand outside

rearview mirrors. The mirrors can be

adjusted remotely with the remote

switch. The mirror heads can be fold-

ed back to prevent damage during an

automatic car wash or when passing

in a narrow street.

CAUTION

WARNING

If the mirror is jammed with ice,

do not adjust the mirror by force.

Use an approved spray de-icer

(not radiator antifreeze) to

release the frozen mechanism or

move the vehicle to a warm

place and allow the ice to melt.

Rearview mirrors

• The outside rearview mirror is

convex. Objects seen in the

mirror are closer than they

appear.

• Use your interior rearview

mirror or direct observation to

determine the actual distance

of following vehicles when

changing lanes.

3-48

Folding the outside rearview

mirror

Remote control

CAUTION

• The mirrors stop moving

when they reach the maxi-

mum adjusting angles, but the

motor continues to operate

while the switch is pressed.

Do not press the switch

longer than necessary, the

motor may be damaged.

3

• Do not attempt to adjust the

outside rearview mirror by

hand. Doing so may damage

the parts.

OLMB043236

OLMB043237

Electric type

Manual type

The electric remote control mirror

switch allows you to adjust the posi-

tion of the left and right outside

rearview mirrors. To adjust the posi-

tion of either mirror, move the lever

(1) to R (Right) or L (Left) to select

the right side mirror or the left side

mirror, then press a corresponding

point on the mirror adjustment con-

trol to position the selected mirror up,

down, left or right.

To fold outside rearview mirror, grasp

the housing of mirror and then fold it

toward the rear of the vehicle.

After adjustment, put the lever into

neutral (center) position to prevent

inadvertent adjustment.

3-49

Convenient features of your vehicle

CAUTION

The electric type outside

rearview mirror operates even

though the ignition switch is in

the OFF position. However, to

prevent unnecessary battery

discharge, do not adjust the

mirrors longer than necessary

while the engine is not running.

OLMB043238

Electric type

CAUTION

To fold the outside rearview mirror,

depress the button.

In case it is an electric type out-

side rearview mirror, don’t fold

it by hand. It could cause motor

failure.

To unfold it, depress the button again.

3-50

Convenient features of your vehicle -> Mirrors for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals