2016-2019 Hyundai Tucson SUV Driving your vehicle -> Manual transaxle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Manual transaxle for Your Hyundai Tucson SUV Third Generation (2016-2019)

Driving your vehicle  
MANUAL TRRANSAXLE (IF EQQUIPPEDD)  
To shift to R (Reverse), make sure  
the vehicle has completely stopped,  
and then move the shift lever to neu-  
tral before moving into R (Reverse).  
Manual transaxle operation  
The manual transaxle has 6 forward  
gears. The transaxle is fully synchro-  
nized in all forward gears so shifting  
to either a higher or a lower gear is  
easily accomplished.  
When you've come to a complete  
stop and it's hard to shift into 1st gear  
or R (Reverse):  
WARNING  
1. Put the shift lever in neutral and  
release the clutch pedal.  
Before leaving the driver’s seat,  
always make sure the shift lever  
is in 1st gear when the vehicle  
is parked on a uphill and in R  
(Reverse) on a downhill, set the  
parking brake, and place the  
ignition switch in the LOCK/OFF  
position. Unexpected vehicle  
movement may occur if these  
precautions are not followed.  
2. Depress the clutch pedal, and  
then shift into first or R (Reverse)  
gear.  
The shift lever can be moved without  
pressing the button (1).  
The button (1) must be pressed while  
moving the shift lever.  
OTL055005  
i
Information  
During cold weather, shifting may be  
difficult until the transaxle lubricant  
has warmed up.  
5-20  
Using the clutch  
Downshifting  
NOTICE  
The clutch pedal should be  
depressed all the way to the floor  
before:  
Downshift when you must slow down  
in heavy traffic or drive up a steep hill  
to prevent engine load.  
To prevent unnecessary wear or  
damage to the clutch:  
• Do not rest your foot on the  
clutch pedal while driving.  
- Starting the engine  
Also, downshifting reduces the  
chance of stalling and can accelerate  
when you need to increase your  
speed again.  
The engine will not start without  
depressing the clutch pedal.  
• Do not hold the vehicle with the  
clutch on an incline, while wait-  
ing for the traffic light, etc.  
- Shifting  
When the vehicle is going downhill,  
downshifting helps maintain safe  
speed by providing brake power from  
the engine and enables less wear on  
the brakes.  
• Always depress the clutch pedal  
down fully to prevent noise or  
damage.  
When releasing the clutch pedal,  
release it slowly. The clutch pedal  
should always be released while  
driving.  
• Do not start with the 2nd (sec-  
ond) gear engaged except when  
you start on a slippery road.  
5
5-21  
Driving your vehicle  
• Exercise extreme caution when  
driving on a slippery surface. Be  
especially careful when braking,  
accelerating or shifting gears. On a  
slippery surface, an abrupt change  
in vehicle speed can cause the  
drive wheels to lose traction and  
may cause loss of vehicle control  
resulting in an accident  
Good driving practices  
NOTICE  
• Never take the vehicle out of gear  
and coast down a hill. This is  
extremely dangerous.  
To prevent damage to the engine,  
clutch and transaxle:  
• When downshifting from 5th  
gear to 4th gear, be careful not  
to inadvertently push the shift  
lever sideways engaging the 2nd  
gear. A drastic downshift may  
cause the engine speed to  
increase to the point  
tachometer will enter the red-  
zone.  
• Don't "ride" the brakes. This can  
cause the brakes and related parts  
to overheat and malfunction.  
When you are driving down a long  
hill, slow down and shift to a lower  
gear. Engine braking will help slow  
down the vehicle.  
the  
WARNING  
• Slow down before shifting to a  
lower gear. This will help avoid  
over-revving the engine, which can  
cause damage.  
Do not use the engine brake  
(shifting from a higher gear to  
lower gear) rapidly on slippery  
roads. The vehicle may slip  
causing an accident.  
• Do not downshift more than two  
gear at a time or downshift the  
gear when the engine is running  
at high speed (5,000 RPM or  
higher). Such a downshifting  
may damage the engine, clutch  
and the transaxle.  
• Slow down when you encounter  
cross winds. This gives you much  
better control of your vehicle.  
• Be sure the vehicle is completely  
stopped before you shift into R  
(Reverse) to prevent damage to  
the transaxle.  
5-22  
(Continued)  
WARNING  
In the event your vehicle  
leaves the roadway, do not  
steer sharply. Instead, slow  
down before pulling back into  
the travel lanes.  
To reduce the risk of SERIOUS  
INJURY or DEATH:  
ALWAYS wear your seatbelt.  
In a collision, an unbelted  
occupant is significantly more  
likely to be seriously injured  
or killed than a properly belt-  
ed occupant.  
HYUNDAI recommends you  
follow all posted speed limits.  
Avoid high speeds when cor-  
nering or turning.  
Do not make quick steering  
wheel movements, such as  
sharp lane changes or fast,  
sharp turns.  
5
The risk of rollover is greatly  
increased if you lose control  
of your vehicle at highway  
speeds.  
Loss of control often occurs if  
two or more wheels drop off  
the roadway and the driver  
over steers to reenter the  
roadway.  
(Continued)  
5-23  

Related Topics

Popular Owner Manuals