Get Driving your vehicle -> Speed limit information function (SLIF) Guide for Hyundai Tucson SUV Third Generation (2016-2019)

SPEED LIMIT INFORMATION FUNCTION ((SLIF) ((IF EQUIPPED)

The SLIF also utilizes the navigation

information to display the speed limit

information.

(Continued)

• The SLIF reads the traffic signs

through the camera to display

the speed limit information.

WARNING

Therefore, the SLIF may not

properly operate, when it is

hard to detect the traffic signs.

For further details, please refer

to the 'Driver’s Attention' in the

same chapter.

• Speed Limit Information Function

(SLIF) is only a supplemental

system and is not always able to

correctly display speed limits

and overtaking restrictions.

OTLE055086

• Do not arbitrarily modify or

manipulate the camera com-

ponents. Do not apply strong

impact.

• The driver still holds the

responsibility not to exceed

the designated speed limit.

5

• Do not install any accessories

and stickers. Do not tint the

front windshield, especially

near the rearview mirror.

• Do not place objects on the

dashboard that reflects light

such as mirrors, white paper,

etc. The system may malfunc-

tion if the sunlight is reflected.

(Continued)

OTLE055089

The SLIF displays the speed limit

information and no-overtaking restric-

tion through the instrument cluster and

the navigation. The SLIF reads the

traffic signs through the camera, which

is attached on the upper part of the

inner front windshield.

5-101

Driving your vehicle

System setting and activation

Operation

i

Information

• The SLIF displays the speed limit

information and alerts the no-over-

taking restriction, when your vehi-

cle passes by the relevant traffic

signs.

■ Type A

■ Type B

The speed limit information on the

instrument cluster may differ from

the one on the navigation. In this case,

check the speed unit setting on the

navigation.

• The SLIF restores the previous

speed limit information, right after

the ignition switch is placed to the

ON position.

• You may find different speed limit

information for the same road. The

information is displayed depending

on the driving situations. Because,

traffic signs with additional sign

(e.g. rainy, arrow, etc.) are also

detected and compared with vehi-

cle interior data (e.g. wiper opera-

tion, turn signal, etc.).

OTLE055079/OTLE055075

• System setting:

The driver can activate the SLIF by

selecting 'User Settings', 'Driving

Assist', and 'Speed Limit Information

Function'.

• When the SLIF is activated, the sym-

bols appear on the instrument clus-

ter to display the speed limit informa-

tion and no-overtaking restriction.

• The SLIF automatically updates

the speed limit information in the

following situations.

- The vehicle changes driving

direction, or makes a U-turn.

• When the SLIF is activated in the

navigation setting, the above infor-

mation and the restriction are also

displayed on the navigation.

- The vehicle enters or exits from a

highway, country road, etc.

- The vehicle enters or exits from a

town, village, etc.

5-102

■ No passing information

■ Unlimited speed (only in Germany)

Display

■ No reliable speed limit information

ꢀꢀꢀ

WTL-222/WTL-221

WUM-205

• The symbol is displayed on the • The symbol, 'end of limitation', is

WTL-220

instrument cluster and the naviga-

tion, when the SLIF detects a no-

overtaking sign.

displayed on the instrument cluster

for the roads in Germany, which

have no speed limit applicable. It is

displayed, until the vehicle passes

by another speed limit sign.

5

• The symbol is displayed on the

instrument cluster and the naviga-

tion, when the SLIF does not

detect any reliable speed limit

information.

5-103

Driving your vehicle

■ Type A

■ Type B

The SLIF may not operate or may

not provide correct information in the

following situations.

Warning message

■ Type A

■ Type B

- The traffic sign is located on a

sharp curve.

- The traffic sign is improperly posi-

tioned (i.e. being turned over,

blocked by an object, and dam-

aged).

- Another vehicle blocks the traffic

sign.

OTLE055081/OTLE055080

- The LED light of the traffic sign is

broken.

The warning message appears for a

few seconds, when the SLIF does

not properly operate. Then, the mas-

OTLE055083/OTLE055082

The warning message appears,

when the camera lens is blocked by

some objects. The SLIF does not

operate, until the objects are

removed. If the problem persists after

removing the objects, we recom-

mend you to have the system

checked by an authorized HYUNDAI

dealer.

- The weather is bad, such as rain-

ing, snowing, and fogging.

ter warning light (

) will illuminate.

- There is sunlight glare around the

traffic sign due to low solar altitude.

We recommend you to have the sys-

tem checked by an authorized

HYUNDAI dealer.

- It is dark at night.

- There is bright light around the traf-

fic sign.

- There is dirt, ice or frost on the

front windshield, where the camera

is installed.

- The camera lens is blocked by an

object, such as sticker, paper, or

fallen leaf.

5-104

- Your vehicle drives right after

another vehicle.

• The SLIF is only to assist the

driver. The driver should pay

great caution to the vehicle oper-

ation.

DRIVER'S ATTENTION

The driver must be cautious in the

following situations. The SLIF may

not assist the driver and may not

properly operate.

- There is a malfunction with the

navigation.

• The driver always holds the

responsibility of safe driving by

following the applicable road

traffic rule(s) and regulation(s).

- The bus or truck, on which the

speed sticker is attached, passes

by your vehicle.

• Do not attach anything, such as

sticker, on the front windshield,

where the camera is installed. It

may adversely affect the SLIF

and cause a malfunction with the

SLIF.

- Your vehicle drives in an area,

which is uncovered by the naviga-

tion system.

- Your navigation has not been

updated.

• Keep the front windshield clean,

especially behind the interior

rearview mirror.

5

• Do not place any objects, which

have reflective surface, such as

a mirror and white paper, on the

instrument cluster.

• Do not arbitrarily modify or

manipulate the camera, such as

touching the lens and unscrew-

ing the camera unit.

• The SLIF is merely a supplemen-

tal system. It may not operate in

a certain situation.

5-105

Driving your vehicle -> Speed limit information function (SLIF) for Your Hyundai Tucson SUV Third Generation (2016-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals