2022-2026 Kia Sportage SUV Driver assistance system -> 360? camera monitoring system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assistance system -> 360? camera monitoring system for Your Kia Sportage SUV Fifth Generation (2022-2026)

Driver assistance system  
360° camera monitoring system  
360° camera monitoring sys  
-
WARNING  
tem (if equipped)  
僅 The image shown on the cluster may  
differ from the actual distance of the  
object. Make sure to directly check the  
vehicle's surroundings for safety.  
僅 If the camera lens is covered with for  
-
eign material, Blind-Spot View Moni  
tor may not operate normally.  
-
ONQ5E041070L  
Always keep the camera lens clean.  
However, do not use chemical sol  
-
vents such as strong detergents con  
taining high alkaline or volatile  
organic solvents (gasoline, acetone  
etc.). This may damage the camera  
lens.  
-
ONQ5041246N  
360° camera monitoring system can  
assist in parking by allowing the driver to  
see around the vehicle.  
Detecting sensor  
6
ONQ5041074L_2  
1: Wide camera monitoring system front  
view camera  
2, 3: Wide camera monitoring system  
side view camera (under the side view  
mirror)  
4: Wide camera monitoring system rear  
view camera  
Refer to the picture above for the  
detailed location of the detecting sen  
-
sors.  
6
91  
Driver assistance system  
360° camera monitoring system  
With the vehicle on, select the setup icon  
360° camera monitoring system  
settings  
(
) on the screen or Settings  
Driver Assistance Parking Safety  
Camera settings from the infotain  
→
Vehicle  
→
→
→
Warning Methods  
-
ment system screen to change the Rear  
View Monitor settings.  
僅 Display Contents: To change the set  
-
tings of Top view parking guidance  
Parking guide in rear view, and  
Parking distance warning function.  
,
僅 Display Settings: To change the  
screen's brightness and contrast.  
ONQ5A053035  
A
: Driver Assistance  
Warning Methods  
Top View Parking Guidance  
1
The Warning Methods can be set with  
the vehicle on. Select Setup Vehicle  
Driver Assistance Warning Meth  
ods from the settings menu in the info  
Front top view  
→
→
→
-
-
tainment system to change the following  
settings:  
僅
Parking Safety Priority: Lowers all  
other audio volumes when Surround  
View Monitor is active is active.  
ONQ5051093N  
Rear top view  
INFORMATION  
僅 If you change the Warning Methods, it  
can be applied to each function of the  
driver assistance system. Please  
check and change it in each function.  
僅 If the vehicle is restarted, Warning  
Methods will maintain the last setting.  
ONQ5051092N  
Parking guidance is displayed on the  
僅 The setting menu may not exist based  
on vehicle specification.  
right side of the 360° camera monitoring  
system screen when the Front or Rear  
Top View Parking Guidance is  
selected.  
Camera settings  
Rear View Parking Guidance  
ONQ5041225N  
ONQ5041253N  
6
92  
Driver assistance system  
360° camera monitoring system  
Rear view parking guidance is displayed  
in the rear view when the Parking guide  
in rear view is selected.  
360° camera monitoring system  
operation  
Parking/View button  
NOTICE  
The horizontal guideline of the Rear  
View Parking Guidance shows the dis  
-
tance of 0.5 m (1.6 ft.), 1 m (3.3 ft.) and  
2.3 m (7.6 ft.) from the vehicle.  
ONQ5041070  
Parking Distance Warning  
Press the Parking/View button (1) to turn  
on or off 360° camera monitoring sys  
-
tem.  
Front view  
ONQ5041254N  
Parking distance warning is displayed on  
the right side of the 360° camera moni  
-
toring system top view screen when the  
Parking distance warning is selected.  
ONQ5041456N  
Front view function is displayed on the  
screen when the gear is in N (Neutral) or  
D (Drive) to assist in parking. The front  
view has a top view, front view, side view  
and 3D view. Also, other view modes can  
be selected by pressing the view icons  
360° camera monitoring system  
Auto On  
6
With the vehicle on, select Settings  
Vehicle Driver Assistance→ Parking  
Safety 360° camera monitoring sys  
→
→
→
-
-
tem Auto On from the infotainment sys  
(2) on the 360° camera monitoring sys  
-
tem screen to use the function.  
tem screen.  
NOTICE  
Operating conditions  
For more details on 360° camera moni  
-
Front view function will turn on when the  
following conditions are satisfied:  
toring system Auto On, refer to "360°  
camera monitoring system Auto On" on  
page 6-93.  
僅 Shifting from R (Reverse) to N (Neu  
-
tral) or D (Drive) and the vehicle speed  
is below approximately 10 km/h (6  
mph).  
僅 Pressing the Parking/View button (1)  
when the gear is in D (Drive) or N  
(Neutral) and vehicle speed is below  
10 km/h (6 mph).  
6
93  
Driver assistance system  
360° camera monitoring system  
僅 Forward Parking Distance Warning  
warns the driver while driving in D  
僅 Pressing the Parking/View button (1)  
when P (Park) gear position is  
selected.  
(Drive) (Driver Assistance  
→
Parking  
Safety 360° camera monitoring  
→
system Auto On selected from the  
Settings menu)  
Off conditions  
Rear view function will turn off when the  
following conditions are satisfied:  
Off conditions  
僅 Shifting from R (Reverse) to P (Park).  
Front view function will turn off when  
the following conditions are satisfied:  
僅 Pressing the Parking/View button (1)  
when P (Park) gear position is  
selected.  
僅 Press the Parking/View button (1) or  
the infotainment system button (3).  
NOTICE  
僅 When vehicle speed is above 10 km/h  
(6 mph).  
Pressing the infotainment system button  
(3) will not turn the rear view off when  
the gear is in R (Reverse).  
僅 Press one of the infotainment system  
button (3), the screen will change to  
the infotainment system screen.  
3D view function  
僅 Shifting to P (Park).  
3D view function shows the vehicle in  
various angles. Press the 3D view icon  
on the 360° camera monitoring system  
screen to choose the angle. Press the 3D  
view icon again to reset the angle.  
NOTICE  
If 360° camera monitoring system is  
turned off after driving more than 10  
km/h (6 mph), driving below 10 km/h (6  
mph) again will not switch to the 360°  
camera monitoring system screen.  
Operating conditions  
3D view function will turn on when the  
following conditions are satisfied:  
Rear view  
Rear view function is displayed on the  
screen when the gear is in R (Reverse) or  
P (Park) to assist in parking. The rear  
view has a top view, rear view, side view  
and 3D view. Also, other view modes can  
be selected by pressing the view icons  
on the 360° camera monitoring system  
screen.  
僅 Shifting to P (Park), N (Neutral) or D  
(Drive) and the vehicle speed is below  
10 km/h (6 mph).  
僅 When shifting to R (Reverse) and 360°  
camera monitoring system is on,  
Press 3D view icon on the 360° cam  
-
era monitoring system screen.  
Off conditions  
Operating conditions  
3D view function will turn off when the  
following conditions are satisfied:  
Rear view function will turn on when the  
following conditions are satisfied:  
僅 Vehicle in P (Park), N (Neutral) or D  
(Drive)  
僅 Shifting to R (Reverse).  
- Shifting to P (Park)  
6
94  
Driver assistance system  
360° camera monitoring system  
- Pressing the Parking/View button  
(1)  
What you see on the screen may dif-  
fer from the actual vehicle's location.  
- Pressing the infotainment screen  
button (3)  
僅 The image shown on the screen may  
differ from the actual distance of the  
object. Make sure to directly check the  
vehicle's surroundings for safety.  
- Pressing the home button on the  
360° camera monitoring system  
screen (2)  
僅 360° camera monitoring system is  
designed to be used on a flat surface.  
- Vehicle speed is above 10 km/h (6  
mph)  
Therefore, if used on roads with dif  
ferent heights such as curbs and  
-
僅 Vehicle in R (Reverse)  
- Shifting to P (Park)  
speed bumps, the image in the screen  
my not look correct.  
NOTICE  
僅 If the camera lens is covered with for  
-
eign material, the 360° camera moni  
toring system may not operate  
normally. Always keep the camera  
lens clean. However, do not use  
chemical solvents such as strong  
detergents containing high alkaline or  
volatile organic solvents (gasoline,  
acetone etc.). This may damage the  
camera lens.  
-
3D view function does not display the  
parking guide.  
360° camera monitoring system  
malfunction and limitations  
360° camera monitoring system  
malfunction  
When 360° camera monitoring system is  
6
not working properly, or the screen flick  
-
NOTICE  
ers, or the camera image does not dis  
-
play normally, have your vehicle  
inspected by an authorized Kia dealer.  
僅 When Rear View while Driving is on, it  
stays on while driving regardless of  
vehicle speed.  
Limitations of 360° camera moni  
-
僅 When Rear View while Driving is on  
while Reversing, the screen changes  
to the rear view.  
toring system  
僅 The screen may be displayed abnor  
-
mally, and an icon will appear at the  
top left side of the screen under the  
following circumstances:  
- The liftgate is opened.  
- The driver or front passenger door  
is opened.  
- The outside rear view mirror is  
folded.  
WARNING  
僅 ALWAYS look around your vehicle to  
make sure there are no objects or  
obstacles before moving the vehicle.  
6
95  

Related Topics

Driver assistance system
Forward Collision-Avoidance Assist (FCA) (Front Camera Only) Forward Collision-Avoidance Assist (FCA) (Sensor Fusion) Blind-Spot Collision-Avoidance Assist (BCA) Manual Speed Limit Assist (MSLA) Intelligent Speed Limit Assist (ISLA) Cruise Control (CC) Smart Cruise Control (SCC) Navigation-based Smart Cruise Control (NSCC) Lane Following Assist (LFA) Blind-Spot View Monitor (BVM) Rear Cross-Traffic Collision-Avoidance Assist (RCCA) Reverse Parking Collision-Avoidance Assist (PCA) Declaration of conformity

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot