2022-2026 Kia Sportage SUV Driver assistance system -> Smart Cruise Control (SCC) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assistance system -> Smart Cruise Control (SCC) for Your Kia Sportage SUV Fifth Generation (2022-2026)

Driver assistance system  
Smart Cruise Control (SCC)  
Driving Assist button to turn off Cruise  
Control. However, Manual Speed Limit  
Assist will turn on.  
Smart Cruise Control (SCC) (if  
equipped)  
Smart Cruise Control is designed to  
detect the vehicle ahead and help main  
tain the desired speed and minimum  
distance with the vehicle ahead.  
-
WARNING  
Take the following precautions when  
using Cruise Control:  
僅 Always set the vehicle speed under  
the speed limit in your country.  
Overtaking Acceleration Assist  
While Smart Cruise Control is operating,  
if the function judges that the driver is  
determined to overtake the vehicle in  
front, acceleration will be assisted.  
僅 Keep Cruise Control off when the  
function is not in use, to avoid inad  
vertently setting a speed. Check that  
the Cruise ( ) indicator is off.  
-
僅 Cruise Control does not substitute for  
proper and safe driving. It is the  
Detecting sensor  
Front view camera  
responsibility of the driver to always  
drive safely and should always be  
aware of unexpected and sudden sit  
-
uations from occurring.  
僅 Always drive cautiously to prevent  
unexpected and sudden situations  
from occurring. Pay attention to the  
road conditions at all times.  
ONQ5051040N  
Front radar  
僅 Do not use Cruise Control when it may  
be unsafe to keep the vehicle at a  
constant speed:  
- When driving in heavy traffic, or  
when traffic conditions make it dif  
-
ficult to drive at a constant speed  
- When driving on rainy, icy, or snow-  
covered roads  
ONQ5041026  
The front view camera and front radar  
are used as a detecting sensor to detect  
the vehicles in front.  
- When driving on hilly or windy  
roads  
- When driving in windy areas  
Refer to the picture above for the  
- When driving with limited view  
(possibly due to bad weather, such  
as fog, snow, rain and sandstorm)  
detailed location of the detecting sensor.  
CAUTION  
僅 Always keep the front view camera  
and front radar in good condition to  
maintain optimal performance of  
Smart Cruise Control.  
僅 Do not use Cruise Control when tow  
ing a trailer.  
-
6
60  
Driver assistance system  
Smart Cruise Control (SCC)  
僅 For more details on the precautions of  
the front view camera and front radar,  
refer to "Forward Collision-Avoidance  
Assist (FCA) (Sensor Fusion) (if  
Each time the button is pressed, the  
vehicle distance changes as follows:  
equipped)" on page 6-13.  
Smart Cruise Control settings  
To turn on Smart Cruise Control  
NOTICE  
僅 If you drive at 90 km/h (56 mph), the  
distance is maintained as follows:  
- Distance 4 - approximately 52.5 m  
(172 ft.)  
- Distance 3 - approximately 40 m  
(130 ft.)  
- Distance 2 - approximately 32.5 m  
(106 ft.)  
ONQ5041043  
Press the Driving Assist ( ) button to  
turn on the function. The speed will be  
set to the current speed on the cluster.  
- Distance 1 - approximately 25 m (82  
ft.)  
僅 The distance is set to the last set dis  
-
僅 If there is no vehicle in front of you,  
the set speed will be maintained.  
tance when the vehicle is restarted, or  
when Smart Cruise Control was tem  
-
僅 If there is a vehicle in front of you, the  
speed may be adjusted to maintain  
the distance to the vehicle ahead. If  
the vehicle ahead accelerates, your  
vehicle will travel at a steady cruising  
speed after accelerating to the set  
speed.  
porarily canceled.  
6
To increase set speed  
NOTICE  
If your vehicle speed is between 0~30  
km/h (0~20 mph) when you press the  
Driving Assist ( ) button, the set speed  
will be set to 30 km/h (20 mph).  
ONQ5041041N  
Push the + switch up and release it  
immediately. The set speed will increase  
by 1 km/h (1 mph) each time the switch  
is operated in this manner.  
To set vehicle distance  
僅 Push the + switch up and hold it. The  
set speed will increase by 10 km/h (5  
mph) each time the switch is operated  
in this manner.  
僅 You can set the speed to 180 km/h  
(110 mph).  
ONQ5041054  
6
61  
Driver assistance system  
Smart Cruise Control (SCC)  
To resume Smart Cruise Control  
WARNING  
Check the driving condition before using  
the + switch. Driving speed may sharply  
increase when you push up and hold the  
+ switch.  
To decrease set speed  
ONQ5041044N_3  
To resume Smart Cruise Control after  
the function was canceled, operate the  
+, - or ( ) switch.  
僅 If you push the + switch up or - switch  
down, vehicle speed will be set to the  
current speed on the cluster.  
ONQ5041300N  
僅 If you push the ( ) switch, vehicle  
speed will resume to the preset speed.  
Push the - switch down and release it  
immediately. The set speed will decrease  
by 1 km/h (1 mph) each time the switch  
is operated in this manner.  
WARNING  
Check the driving condition before using  
the ( ) switch. Driving speed may  
sharply increase or decrease when you  
press the ( ) switch.  
僅 Push the - switch down and hold it.  
The set speed will decrease by 10 km/  
h (5 mph) each time the switch is  
operated in this manner.  
僅 You can set the speed to 30 km/h (20  
mph).  
To turn off Smart Cruise Control  
To temporarily cancel Smart  
Cruise Control  
ONQ5041043  
Press the Driving Assist ( ) button to  
turn Smart Cruise Control off.  
ONQ5041042N_2  
NOTICE  
Press the ( ) switch or depress the  
brake pedal to temporarily cancel Smart  
Cruise Control.  
If your vehicle is equipped with Manual  
Speed Limit Assist, press and hold the  
Driving Assist ( ) button to turn off  
Smart Cruise Control. However Manual  
Speed Limit Assist will turn on.  
6
62  
Driver assistance system  
Smart Cruise Control (SCC)  
A
: Driver Assistance  
Warning Methods  
Based on Drive Mode  
Smart Cruise Control will change accel  
-
1
eration based on the drive mode  
selected from Drive Mode Integrated  
Control function. Refer to the following  
chart.  
The Warning Methods can be set with  
the vehicle on. Select User Settings  
Driver Assistance Warning Methods  
from the settings menu in the instru  
ment cluster or Setup Vehicle  
Driver Assistance Warning Methods  
from the settings menu in the infotain  
→
→
-
→
→
Drive Mode  
SMART  
Smart Cruise Control  
Normal  
→
-
SPORT  
Fast  
ment system to change the following  
settings:  
SNOW  
Normal  
NORMAL  
Normal  
僅
Warning Volume: Adjusts the volume  
of the warning sound.  
NOTICE  
僅
Haptic Warning: Activate the steer  
ing wheel vibration warning. (if  
equipped)  
-
僅 For more details on Drive Mode, refer  
to "Drive mode integrated control sys  
tem" on page 5-50.  
-
僅
Driving Safety Priority: Lowers all  
other audio volumes when the Driving  
Safety system sounds a warning.  
僅 Smart Cruise Control may not turn on  
or off in some of the drive modes for  
the operating conditions are not satis  
fied.  
-
INFORMATION  
僅 If your vehicle is not equipped with  
僅 If you change the Warning Methods, it  
can be applied to each function of the  
driver assistance system. Please  
Drive Mode Integrated Control sys  
-
6
tem, Smart Cruise Control accelerates  
your vehicle at a normal level.  
check and change it in each function.  
僅 If the vehicle is restarted, Warning  
Methods will maintain the last setting.  
Warning Methods  
僅 The setting menu may not exist based  
on vehicle specification.  
僅 The Warning Volume and Haptic  
Warning cannot be turned off at the  
same time. When one of the warning  
is turned off the other is activated.  
ONQ5A043117  
ONQ5A053035  
6
63  
Driver assistance system  
Smart Cruise Control (SCC)  
僅 Deceleration is not needed to main  
tain distance with the vehicle in front  
-
Smart Cruise Control operation  
Operating conditions  
WARNING  
Smart Cruise Control will operate when  
the following conditions are satisfied.  
僅 When the turn signal indicator is  
turned on to the left while there is a  
vehicle ahead, the vehicle may accel  
erate temporarily. Pay attention to the  
road conditions at all times.  
-
Basic function  
僅 The gear is in D (Drive)  
僅 The driver's door is closed  
僅 Regardless of your country's driving  
direction, Overtaking Acceleration  
僅 EPB (Electronic Parking Brake) is not  
applied  
Assist will operate when the condi  
-
僅 Your vehicle speed is within the oper  
ating speed range  
-
tions are satisfied. When using the  
function in countries with different  
driving direction, always check the  
road conditions at all times.  
- When there is no vehicle in front:  
10~180 km/h (5~110 mph)  
- when there is a vehicle in front:  
0~180 km/h (0~110 mph)  
Smart Cruise Control display and  
control  
僅 ESC (Electronic Stability Control) or  
ABS is on  
僅 ESC (Electronic Stability Control) or  
ABS is not controlling the vehicle  
Basic function  
You can see the status of Smart Cruise  
Control operation in the Driving Assist  
僅 Engine is not running at high RPM  
僅 Forward Collision-Avoidance Assist  
brake control is not operating  
mode on the cluster. Refer to "Instru  
ment cluster" on page 4-62.  
-
Smart Cruise Control will be displayed as  
below depending on the status of the  
function.  
NOTICE  
When stopped behind another vehicle,  
the driver can turn on Smart Cruise Con  
trol while the brake pedal is depressed.  
-
僅 When operating  
Overtaking Acceleration Assist  
Overtaking Acceleration Assist will oper  
ate when the turn signal indicator is  
turned on to the left while Smart Cruise  
Control is operating, and the following  
conditions are satisfied:  
-
ONQ5041167L  
1. Whether there is a vehicle ahead  
and the selected distance level are  
displayed.  
僅 Your driving speed is above 60 km/h  
(40 mph)  
2. Set speed is displayed.  
僅 The hazard warning flasher is off  
3. Whether there is a vehicle ahead  
and the selected target distance are  
displayed.  
僅 A vehicle is detected in front of your  
vehicle  
6
64  
Driver assistance system  
Smart Cruise Control (SCC)  
僅 When temporarily canceled  
WARNING  
Be careful when accelerating temporar  
-
ily, because the speed and distance is  
not controlled automatically even if  
there is a vehicle in front of you.  
ONQ5041168  
Smart Cruise Control temporarily  
canceled  
1. (  
) indicator is displayed.  
2. The previous set speed is shaded.  
NOTICE  
僅 The distance of the front vehicle on  
the cluster is displayed according to  
the actual distance between your  
vehicle and the vehicle ahead.  
ONQ5041171L  
僅 The target distance may vary accord  
-
A: Smart Cruise Control deactivated  
ing to your driving speed and the set  
distance level. If your driving speed is  
low, even though the vehicle distance  
Smart Cruise Control will be temporarily  
canceled automatically when:  
have changed, the change of the tar  
get vehicle distance may be small.  
-
僅 The vehicle speed is above 190 km/h  
(120 mph)  
僅 The vehicle is stopped for a certain  
period of time  
6
To temporarily accelerate  
僅 The accelerator pedal is continuously  
depressed for a certain period of time  
僅 The conditions for Smart Cruise Con  
-
trol to operate is not satisfied  
If Smart Cruise Control is temporarily  
canceled automatically, a warning mes  
sage will appear on the cluster, and an  
audible warning will sound to warn the  
driver.  
-
ONQ5E041302L  
If you want to speed up temporarily  
without altering the set speed while  
Smart Cruise Control is operating,  
NOTICE  
depress the accelerator pedal. While the  
accelerator pedal is depressed, the set  
speed, distance level and target distance  
will blink on the cluster.  
If Smart Cruise Control is automatically  
canceled temporarily when the vehicle is  
stopped, the Electronic Parking Brake  
(EPB) may be applied.  
However, if the accelerator pedal is  
depressed insufficiently, the vehicle may  
decelerate.  
6
65  
Driver assistance system  
Smart Cruise Control (SCC)  
In addition, after the vehicle has stopped  
WARNING  
and a certain time have passed, a warn  
ing message like above will appear on  
the cluster. Depress the accelerator  
pedal or push the + switch, - switch or  
-
When Smart Cruise Control is temporar  
ily canceled, distance with the front vehi  
cle will not be maintained. Always have  
-
-
your eyes on the road while driving, and  
if necessary, depress the brake pedal to  
reduce your driving speed in order to  
maintain a safe distance.  
(
) switch to start driving.  
Warning road conditions ahead  
Smart Cruise Control conditions  
not satisfied  
ONQ5041173L  
A: Watch for surrounding vehicles  
In the following situation, the warning  
message will appear on the cluster, and  
an audible warning will sound to warn  
the driver of road conditions ahead.  
ONQ5041170L  
A: Smart Cruise Control conditions not  
僅 The vehicle in front disappears when  
Smart Cruise Control is maintaining  
the distance with the vehicle ahead  
while driving below a certain speed.  
met  
If the Driving Assist button, + switch, -  
switch or ( ) switch is pushed when  
Smart Cruise Control's operating condi  
tions are not satisfied, a warning mes  
sage will appear on the cluster, and an  
audible warning will sound.  
-
-
WARNING  
Always pay attention to vehicles or  
objects that may suddenly appear in  
front of you, and if necessary, depress  
the brake pedal to reduce your driving  
In traffic situation  
speed in order to maintain a safe dis  
tance.  
-
Collision Warning  
ONQ5041172L  
A: Use switch or pedal to accelerate  
In traffic, your vehicle will stop if the  
vehicle ahead of you stops. Also, if the  
vehicle ahead of you starts moving, your  
vehicle will start as well.  
ONQ5041132L  
A: Collision Warning  
6
66  
Driver assistance system  
Smart Cruise Control (SCC)  
While Smart Cruise Control is operating,  
when the collision risk with the vehicle  
ahead is high, a warning message will  
appear on the cluster, and an audible  
warning will sound to warn the driver.  
Always have your eyes on the road while  
driving, and if necessary, depress the  
brake pedal to reduce your driving  
僅 Do not open the door when Smart  
Cruise Control is operating, even if the  
vehicle is stopped.  
僅 Always be aware of the selected  
speed and vehicle distance.  
僅 Keep a safe distance according to  
road conditions and vehicle speed. If  
the vehicle distance is too close  
speed in order to maintain a safe dis  
-
during high-speed driving, a serious  
tance.  
collision may result. Always pay atten  
-
tion to the road condition ahead.  
WARNING  
僅 When maintaining distance with the  
vehicle ahead, if the front vehicle dis  
appears, the function may suddenly  
accelerate to the set speed. Always be  
aware of unexpected and sudden sit  
uations from occurring.  
In the following situations, Smart Cruise  
Control may not warn the driver of a col  
lision.  
-
-
僅 The distance from the front vehicle is  
near, and the vehicle speed of the  
front vehicle is faster or similar with  
your vehicle  
-
僅 Vehicle speed may decrease on an  
upward sloped road and increase on a  
downward sloped road.  
僅 The speed of the front vehicle is very  
slow or is at a standstill  
僅 Always be aware of situations such as  
when a vehicle cuts in suddenly.  
僅 The accelerator pedal is depressed  
right after Smart Cruise Control is  
turned on  
6
僅 When you are towing a trailer or  
another vehicle, we recommend that  
Smart Cruise Control is turned off due  
to safety reasons.  
WARNING  
Take the following precautions when  
using Smart Cruise Control:  
僅 Turn off Smart Cruise Control when  
your vehicle is being towed.  
僅 Smart Cruise Control does not substi  
tute for proper and safe driving. It is  
the responsibility of the driver to  
-
僅 Smart Cruise Control may be can  
celed if interfered by strong electro  
magnetic waves.  
-
-
always check the speed and distance  
to the vehicle ahead.  
僅 Smart Cruise Control may not detect  
an obstacle in front and lead to a colli  
sion. Always look ahead cautiously to  
-
僅 Smart Cruise Control may not detect  
unexpected and sudden situations or  
complex driving situations, so always  
pay attention to driving conditions  
and control your vehicle speed.  
prevent unexpected and sudden situ  
-
ations from occurring.  
僅 Vehicles moving in front of you with a  
frequent lane change may cause a  
delay in the function's reaction or may  
僅 Keep Smart Cruise Control off when  
the function is not in use to avoid  
inadvertently setting a speed.  
cause the function to react to a vehi  
cle actually in an adjacent lane.  
Always drive cautiously to prevent  
-
6
67  
Driver assistance system  
Smart Cruise Control (SCC)  
unexpected and sudden situations  
from occurring.  
Smart Cruise Control malfunc  
tion and limitations  
-
僅 Always be aware of the surroundings  
Smart Cruise Control malfunction  
and drive safely, even though a warn  
ing message does not appear or an  
audible warning does not sound.  
-
僅 If any other function's warning mes  
-
sage is displayed or warning sound is  
generated, Smart Cruise Control  
warning message may not be dis  
-
ONQ5041174L  
played and warning sound may not  
be generated.  
A: Check Smart Cruise Control System  
When Smart Cruise Control is not work  
ing properly, a warning message will  
appear, and the ( ) warning light will  
appear on the cluster. Have Smart  
Cruise Control inspected by visiting an  
authorized Kia dealer.  
-
僅 You may not hear the warning sound  
of Smart Cruise Control if the sur  
-
roundings are noisy. Always pay  
attention to the road condition ahead.  
僅 The vehicle manufacturer is not  
responsible for any traffic violation or  
accidents caused by the driver while  
Smart Cruise Control is operating.  
Smart Cruise Control disabled  
僅 Always set the vehicle speed under  
the speed limit in your country.  
NOTICE  
僅 Smart Cruise Control may not operate  
for 15 seconds after the vehicle is  
restarted or the front view camera or  
front radar is initialized.  
ONQ5041175L  
A: Smart Cruise Control disabled.  
Radar blocked  
僅 You may hear a sound when the  
brake is controlled by Smart Cruise  
Control.  
When the front radar cover or sensor is  
covered with snow, rain, or foreign  
material, it can reduce the detecting per  
-
formance and temporarily limit or dis  
-
able Smart Cruise Control.  
NOTICE  
If this occurs, a warning message will  
appear on the cluster.  
The images or colors may be displayed  
differently depending on the specifica  
-
Smart Cruise Control will operate nor  
-
tions of the instrument cluster or theme.  
mally when snow, rain or foreign mate  
-
rial is removed.  
6
68  
Driver assistance system  
Smart Cruise Control (SCC)  
僅 The brightness outside is low, and the  
headlamps are not on or are not  
bright  
WARNING  
Even though the warning message does  
not appear on the cluster, Smart Cruise  
Control may not properly operate.  
僅 Driving in heavy rain or snow, or thick  
fog  
僅 Driving through steam, smoke or  
shadow  
CAUTION  
Smart Cruise Control may not properly  
operate in an area (e.g. open terrain),  
where there is nothing to detect after  
turning ON the vehicle.  
僅 Only part of the vehicle is detected  
僅 The vehicle in front has no tail lights,  
tail lights are located unusually, etc.  
僅 The brightness outside is low, and the  
tail lamps of the vehicle in front are  
not on or are not bright  
Limitations of Smart Cruise Con  
-
trol  
僅 The rear of the front vehicle is small or  
Smart Cruise Control may not operate  
does not look normal (i.e. tilted, over  
turned, etc.)  
-
normally under the following circum  
-
stances:  
僅 The front vehicle's ground clearance  
is low or high  
僅 The detecting sensor or the surround  
-
ings are contaminated or damaged  
僅 A vehicle suddenly cuts in front  
僅 Your vehicle is being towed  
僅 Washer fluid is continuously sprayed,  
or the wiper is on  
僅 Driving through a tunnel or iron  
bridge  
僅 The camera lens is contaminated due  
to tinted, filmed or coated windshield,  
damaged glass, or stuck of foreign  
material (sticker, bug, etc.) on the  
glass  
6
僅 Driving near areas containing metal  
substances, such as a construction  
zone, railroad, etc.  
僅 A material is near that reflects very  
well on the front radar, such as a  
guardrail, nearby vehicle, etc.  
僅 Moisture is not removed or frozen on  
the windshield  
僅 The field of view of the front view  
camera is obstructed by sun glare  
僅 The bumper around the front radar is  
impacted, damaged or the front radar  
is out of position  
僅 Street light or light from an oncoming  
vehicle is reflected on the wet road  
surface, such as a puddle on the road  
僅 The temperature around the front  
radar is high or low  
僅 The temperature around the front  
view camera is high or low  
僅 Driving in large areas where there are  
few vehicles or structures (i.e. desert,  
meadow, suburb, etc.)  
僅 An object is placed on the dashboard  
僅 The surroundings are very bright  
僅 The vehicle in front is made of mate  
-
僅 The surroundings are very dark, such  
as in a tunnel, etc.  
rial that does not reflect on the front  
radar  
僅 The brightness changes suddenly, for  
example when entering or exiting a  
tunnel  
僅 Driving near a highway (or motorway)  
interchange or tollgate  
6
69  
Driver assistance system  
Smart Cruise Control (SCC)  
僅 Driving on a slippery surface due to  
snow, water puddle, ice, etc.  
僅 Driving on a curved road  
僅 Driving on a curved road  
僅 The vehicle in front is detected late  
僅 The vehicle in front is suddenly  
blocked by a obstacle  
僅 The vehicle in front suddenly changes  
lane or suddenly reduces speed  
ONQ5041055  
On curved roads, Smart Cruise Con  
-
僅 The vehicle in front is bent out of  
shape  
trol may not detect a vehicle in the  
same lane, and may accelerate to the  
set speed. Also, vehicle speed may  
rapidly decrease when the vehicle  
ahead is detected suddenly.  
僅 The front vehicle's speed is fast or  
slow  
僅 With a vehicle in front, your vehicle  
changes lane suddenly at low speed  
Select the appropriate set speed on  
curved roads and apply the brake  
pedal or accelerator pedal according  
to the road and driving conditions  
ahead.  
僅 The vehicle in front is covered with  
snow  
僅 Unstable driving  
僅 You are on a roundabout and the  
vehicle in front is not detected  
僅 You are continuously driving in a cir  
-
cle  
僅 Driving in a parking lot  
僅 Driving through a construction area,  
unpaved road, partial paved road,  
uneven road, speed bumps, etc.  
ONQ5041056  
Your vehicle speed can be reduced  
due to a vehicle in the adjacent lane.  
僅 Driving on an incline road, curved  
road, etc.  
Check to be sure that the road condi  
tions permit safe operation of Smart  
Cruise Control and if necessary,  
depress the brake pedal to reduce  
your driving speed in order to main  
tain a safe distance.  
-
僅 Driving through a roadside with trees  
or streetlights  
僅 The adverse road conditions cause  
excessive vehicle vibrations while  
driving  
-
僅 Driving on a sloped road  
僅 Your vehicle height is low or high due  
to heavy loads, abnormal tire pres  
sure, etc.  
-
僅 Driving through a narrow road where  
trees or grass are overgrown  
僅 There is interference by electromag  
-
netic waves, such as driving in an area  
with strong radio waves or electrical  
noise  
ONQ5041057  
During uphill or downhill driving,  
Smart Cruise Control may not detect a  
6
70  
Driver assistance system  
Smart Cruise Control (SCC)  
moving vehicle in your lane, and  
僅 Detecting a vehicle  
cause your vehicle to accelerate to the  
set speed. Also, vehicle speed will rap  
idly decrease when the vehicle ahead  
is detected suddenly.  
-
Select the appropriate set speed on  
sloped roads and apply the brake  
pedal or accelerator pedal according  
to the road and driving conditions  
ahead.  
ONQ5041058  
僅 Changing lanes  
ONQ5041024  
In the following cases, some vehicles  
in your lane cannot be detected by  
the sensor:  
6
- Vehicles offset to one side  
ONQ5041022  
[A]: Your vehicle  
- Slow-moving vehicles or sudden-  
decelerating vehicles  
[B]: Lane changing vehicle  
- Vehicles with higher ground clear  
ance or vehicles carrying loads that  
stick out of the back of the vehicle  
-
When a vehicle moves into your lane  
from an adjacent lane, it cannot be  
detected by the sensor until it is in the  
sensor's detection range. Smart  
Cruise Control may not immediately  
detect the vehicle when the vehicle  
changes lanes abruptly. Always pay  
- Vehicles that has the front lifted  
due to heavy loads  
- Oncoming vehicles  
- Stopped vehicles  
attention to the road and driving con  
ditions and drive safely. If necessary,  
depress the brake pedal to reduce  
-
- Vehicles with small rear profile,  
such as trailers  
- Narrow vehicles, such as motorcy  
cles or bicycles  
-
your driving speed in order to main  
-
tain a safe distance.  
- Special vehicles  
- Animals and pedestrians  
- Vehicle at a short distance (about  
2m)  
6
71  
Driver assistance system  
Smart Cruise Control (SCC)  
In the following cases, the vehicle in  
front cannot be detected by the sen  
sor. Always pay attention to the road  
and driving conditions and drive  
safely. If necessary, adjust your vehi  
cle speed.  
This device complies with Indus  
try Canada licence-exempt RSS  
standard(s).  
-
-
Operation is subject to the following  
conditions:  
-
1. This device may not cause interfer  
-
- You are steering your vehicle  
ence, and  
- Driving on narrow or sharply  
curved roads  
2. This device must accept any interfer  
-
ence, including interference that may  
cause undesired operation of the  
device.  
3. Changes or modifications not  
expressly approved by the party  
responsible for compliance could void  
the user's authority to operate the  
device.  
ONQ5041059  
僅 When a vehicle ahead disappears at  
an intersection, your vehicle may  
accelerate.  
Always pay attention to road and driv  
ing conditions while driving.  
-
ONQ5041060  
僅 When a vehicle in front of you merges  
out of the lane, Smart Cruise Control  
may not immediately detect the new  
vehicle that is now in front of you.  
Always pay attention to road and driv  
ing conditions while driving.  
-
ONQ5041061  
僅 Always look out for pedestrians when  
your vehicle is maintaining a distance  
with the vehicle ahead.  
6
72  

Related Topics

Driver assistance system
Forward Collision-Avoidance Assist (FCA) (Front Camera Only) Forward Collision-Avoidance Assist (FCA) (Sensor Fusion) Blind-Spot Collision-Avoidance Assist (BCA) Manual Speed Limit Assist (MSLA) Intelligent Speed Limit Assist (ISLA) Cruise Control (CC) Navigation-based Smart Cruise Control (NSCC) Lane Following Assist (LFA) Blind-Spot View Monitor (BVM) 360? camera monitoring system Rear Cross-Traffic Collision-Avoidance Assist (RCCA) Reverse Parking Collision-Avoidance Assist (PCA) Declaration of conformity

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot