STARTING & DRIVING
•
•
•
The driver unfastens his/her seat belt.
The driver door is opened.
Adaptive Cruise Resume
If the ACC system has reverted to, or been switched to,
the Standby mode it can be reactivated by moving the lever
switch to 'Resume' position (5). The target cruise speed
will automatically be set to the target speed before exiting
the adaptive cruise control system.
The stop time exceeds 3 mins.
Adaptive Cruise Override
If the driver has cause to use the accelerator pedal when
the ACC is activated, the vehicle will remain in Cruise
mode while the vehicle speed increases. When the
accelerator pedal is released, the ACC will resume to
operate at previously set cruise speed.
When driving at a high speed, if the driver resumes to
a lower target cruise speed, the ACC will decrease to
the target cruise speed in a more gradual manner. If
it is necessary to decrease to the target cruise speed
rapidly, the driver may manually move the lever switch
'Deceleration' (2).
4
If the driver accelerates to a higher speed and then releases
the accelerator the ACC will decrease to the target cruise
speed in a more gradual manner. If it is necessary to
decrease to the target cruise speed rapidly, the driver may
manually move the lever switch 'Deceleration' (2).
Clear the Speed Memory
If the lever switch is moved to 'OFF' position (7) or
the vehicle START/STOP switch is switched to the OFF
position, the system may clear the adaptive cruise control
set speed in the memory.
Note: If the accelerator pedal is pressed and held
above the preset time period the ACC may exit to the
Standby mode.
221
English 
