STARTING & DRIVING
Adaptive Cruise Target Following Distance
Adjustment
Automatic Deactivation of Adaptive Cruise
In the following situations, the ACC may be automatically
deactivated, this transfers full control of the vehicle to the
driver.
When the adaptive cruise control system is activated,
rotate the switch on the end of the lever upward (8 ) or
downward (9) to adjust the following distance, you are
able to toggle between 3 distance settings, the current
following distance setting will be stored by the system
until it is changed, and displayed in the message centre in
the instrument pack.
•
•
•
•
•
Move the lever switch to 'Off' position (7).
Press the brake pedal whilst the vehicle is in motion.
Move the shift lever away from the D position.
The driver unfastens his/her seat belt.
Press and hold the accelerator pedal beyond a preset
time period.
Always select an appropriate following distance that is
relative to the current speed of your vehicle and the
vehicle you are following, the greater the speed, the
further the distance. ALWAYS consider current traffic,
road and weather conditions when making your selection.
•
•
•
Open any door, bonnet or tailgate.
Pull the EPB switch up to apply the parking brake.
Follow the vehicle ahead to a stop and the stop time
exceeds 3 mins.
•
The sensor or radar view is blocked, the ambient light
condition triggers the preset safe exit mechanism of the
light sensor, or the system fails.
Adaptive Cruise Pause
When the adaptive cruise control system is activated, move
the lever switch to the 'Cancel' position (3 ), and the system
will exit to the Standby mode.
Note: If following the vehicle ahead to a stop with
the adaptive cruise control system enabled, if any of
the following conditions occur whilst the vehicle is in a
stopped state, the EPB will automatically be applied:
220
English 
