STARTING & DRIVING
The rear driver assistance system includes blind spot
detection (BSD), lane change assist (LCA), rear cross
traffic alert (RCTA) and door open warning (DOW)
functions.
Note: The radar requires calibration on new vehicles
or for vehicles of where rear detecting radar
a
sensor has been replaced. The rear detection radar
sensors possess an automatic calibration function to
compensate for installation error within a certain
range. When the vehicle is running, the radar will
automatically enter the calibration state. During the
calibration process, the system will provide limited
functions, and the alarm may be inaccurate. Upon
completion of the calibration, the system will resume
all functions.
The rear driver assistance modules are mounted at the
rear of the vehicle on each side, they can assist in detecting
vehicles behind or to the side of your vehicle.
The warning lamps to support this system are located
within the LH and RH door quarter light trims, they will
illuminate or flash to warn of an approaching object or car
to assist you in manoeuvring the car safely.
Switching the System Functions On/Off
The rear driver assist system function switches can be
accessed via the infotainment screen.
Select: 'Vehicle Settings', 'Driving Assist' and 'Rear Driving
Assist' (you may have to scroll left or right to access this
option). Select ON/OFF to activate/deactivate the system.
A warning message to alert you of your choice will be
displayed in the message centre in the instrument pack.
If the 'Rear Driving Assist' is ON, the sub system menu
will become 'live' and you can select the ON/OFF option
228
English 
