2018-2023 Mg HS SUV Starting & Driving -> System Functions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting & Driving -> System Functions for Your Mg HS SUV First Generation (2018-2023

STARTING & DRIVING  
for each of the sub systems. If the 'Rear Driving Assist' is  
switched OFF, none of the sub systems will be selectable  
and the entire system will be in an OFF state.  
System Functions  
Blind Spot Detection (BSD)  
When the vehicle is driving forward, the system will  
monitor for motor vehicles located in the blind zones of  
the left and right exterior mirrors. When the conditions  
for activating the blind spot detection function are met, the  
corresponding warning lamps will illuminate. Subsequent  
operation of the relevant indicator will cause the warning  
lamp to flash to remind the driver of an approaching  
vehicle.  
When the vehicle is restarted, the system will keep the  
previously stored switch settings.  
4
229  
STARTING & DRIVING  
of the vehicle, the monitored areas are 2m ahead , 7m  
behind the rear of the vehicle, and 4.7m from the side  
of the vehicle.  
Note: The warning lamps will not illuminate whilst  
you are overtaking another vehicle and your speed is  
greater than that of the vehicle you are passing, even  
though it is in the blind zone.  
The conditions for activating the blind spot detection  
function include:  
1
Rear driver assistance system is in the ON state and  
no faults are present in the system.  
2
3
4
Blind spot detection (BSD) function is enabled.  
The vehicle speed is above 20mph (30km/h).  
There are motor vehicles in the blind zone of the  
vehicle. The system monitors both the left and right  
230  
STARTING & DRIVING  
Lane Change Assist (LCA)  
The conditions for activating the lane change assist function  
include:  
When the vehicle is driving forward, the system will  
monitor for motor vehicles approaching rapidly in the  
adjacent lanes. When the indicators are activated, and the  
conditions for activating the lane change assist function  
are met, the system will flash the respective warning lamp  
to warn the driver of an approaching vehicle. This aims to  
help avoid collisions when changing lanes.  
1
Rear driver assistance system is in the ON state and  
no faults are present in the system.  
2
3
4
Lane change assist (LCA) function is enabled.  
The vehicle speed is above 20mph (30km/h).  
The speed of the approaching vehicle is higher than the  
speed of your vehicle.  
4
5
6
The approaching vehicle enters the detection area of  
the LCA, the monitored areas are 7m - 70m behind  
your vehicle and 4.7 m to the side of your vehicle.  
The approaching vehicle is likely to have a collision with  
your vehicle within 3.5 seconds.  
231  
STARTING & DRIVING  
Rear Cross Traffic Alert (RCTA)  
The conditions for activating the rear cross traffic alert  
function include:  
When the vehicle is reversing, the system will monitor  
vehicles approaching from the left and right rear. When  
the conditions for activating RCTA function are met,  
the warning lamps on the corresponding side will  
illuminate, simultaneously a warning triangle icon for the  
corresponding side will be displayed in the infotainment  
screen to alert the driver to the situation.  
1
Rear driver assistance system is in the ON state and  
no faults are present in the system.  
2
3
4
5
Rear cross traffic alert (RCTA) function is enabled.  
The vehicle is in Reverse gear.  
The vehicle speed is less than 5mph (9km/h).  
The speed of the vehicle being monitored is above  
5mph (9km/h).  
6
The motor vehicle drives across the system detection  
areas. The areas monitored to the left and right of the  
vehicle are 5m behind the rear of the vehicle, and 25m  
from the side.  
7
The approaching vehicle is likely to have a collision with  
your vehicle within 2.5 seconds.  
232  
STARTING & DRIVING  
Door Open Warning (DOW)  
Whilst the vehicle is stationary, the Door Open Warning  
system monitors the surrounding area for approaching  
vehicles, motorcycles and bicycles.  
If the approaching object meets the conditions  
programmed into the system the corresponding warning  
light will illuminate to warn the occupant of the  
approaching object and assist in avoiding any collisions  
when the door is opened.  
4
233  
STARTING & DRIVING  
The conditions for activating the door open warning  
function include:  
1
Rear driver assistance system is in the ON state and  
no faults are present in the system.  
2
3
Door open warning (DOW) function is enabled.  
The vehicle is in ACC or ignition ON/RUNNING  
state.  
4
5
The vehicle is in stationary.  
The speed of the vehicle being monitored is above  
5mph (9km/h).  
6
7
The vehicle drives across the system detection areas.  
The detection areas are: Rearward of the door  
mirrors and 2.4 metres from each side of the vehicle.  
The approaching vehicle is likely to have a collision with  
your vehicle within 2.5 seconds.  
Note: The detection area, collision time threshold  
value and vehicle speed provided in the system  
function description are just for your reference.  
234  

Related Topics

Starting & Driving
Stop-Start Intelligent Fuel Saving System Failure Starter Inoperative, Serious Battery Capacity Loss Cruise Control System Cruise Control System Activation Pause/Stand By Resume Adaptive Cruise Control System Adaptive Cruise Control System Activation Adaptive Cruise Target Following Distance Adjustment Adaptive Cruise Pause Adaptive Cruise Override Adaptive Cruise Resume Clear the Speed Memory Special Driving Environments Parking Aid System Ultrasonic Sensor Parking Aid Parking Camera Rear Driver Assistance System System Overview Switching the System Functions On/Off Driving Assist System Speed Assist System (SAS) Lane Keeping Assist System (LKA) MG Pilot System Forward Collision Warning System (FCW) Load Carrying Load Space Internal Loading General Towing Safety

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot