STARTING & DRIVING
Stop-Start Intelligent Fuel Saving System
Failure
DO NOT disconnect the battery sensor
unless absolutely necessary. Removal
will result in inaccurate battery power
calculation which will effect the automatic
engine start.
In the event of a Stop-Start Intelligent Fuel Saving System
failure, contact an MG Authorised Repairer. The Stop-Start
Intelligent Fuel Saving System can be effected by faults
within other vehicle systems - in the event of failure
contact an Authorised MG Repairer.
Failure to operate within the following guidelines will effect
battery performance and automatic Start-Stop control:
1
After power interruptions (battery disconnection) the
automatic Start-Stop function will be suspended until
the vehicle is left in a locked state for at least 4 hours
whilst the system relearns the state of the battery.
Starter Inoperative,
Capacity Loss
Serious Battery
4
In the case of serious battery power loss, automatic
Stop-Start and key start may not be possible. In this case
refer to the Emergency Information chapter, Emergency
Starting section for further details.
2
If the vehicle is run continually for more than 100
hours uninterrupted, the Start-Stop function will be
suspended until the vehicle is left in a locked state for
at least 4 hours whilst the system relearns the state of
the battery.
Note: DO NOT connect the jump battery negative
cable to the battery negative!
inaccurate battery power calculation which will effect
the automatic engine start.
It will result in
3
If the battery requires replacement, ALWAYS use
a genuine part to the manufacturers specification.
Failure to adhere to this can affect the automatic
Start-Stop system.
211
English 
