2015-2024 Mini Clubman SUV CONTROLS -> Displays (warning lights) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Displays (warning lights) for Your Mini Clubman SUV Second Generation (2015-2024)

CONTROLS  
Displays  
Displays  
able in the vehicle, e.g., due to the selected  
options or country versions. This also ap-  
plies to safety-related functions and sys-  
tems. When using these functions and sys-  
tems, the applicable laws and regulations  
must be observed.  
Vehicle features and options  
This chapter describes all standard, coun-  
try-specific and optional equipment offered  
with the series. It also describes features  
and functions that are not necessarily avail-  
Instrument cluster  
Instrument cluster without enhanced features: overview  
1
2
3
Tachometer 132  
Indicator/warning lights  
Speedometer  
4
5
6
Fuel gauge 132  
Display/reset kilometers 132  
Electronic displays 126  
124  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Instrument cluster with enhanced features: overview  
1
2
3
Tachometer 132  
4
5
6
Vehicle speed  
Display/reset kilometers 132  
Electronic displays 127  
Indicator/warning lights  
Fuel gauge 132  
125  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Instrument cluster without additional functions: electronic displays  
1
Driver assistance systems  
Messages, for instance Check Control  
Time 133  
Total kilometers/trip odometer 132  
On-board computer 137  
2
3
Selector lever position 117  
Outside temperature 132  
Selection lists 137  
Gear shift indicator 135  
MINI Driving Modes switch status 180  
126  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Instrument cluster with enhanced features: electronic displays  
1
2
Selector lever position 117  
Gear shift indicator 135  
Time 133  
Range 133  
5
6
Messages, for instance Check Control  
Selection lists 137  
MINI Driving Modes switch status 180  
Driver assistance systems  
Outside temperature 132  
Navigation instructions  
Total kilometers/trip odometer 132  
On-board computer 137  
3
4
In addition, an acoustic signal may be out-  
put and a text message may appear on the  
control display.  
Check Control  
Principle  
The Check Control system monitors func-  
tions in the vehicle and notifies you of  
faults in the monitored systems.  
Indicator/warning lights  
General information  
The indicator/warning lights can illuminate  
in a variety of combinations and colors.  
General information  
A Check Control message is displayed as a  
combination of indicator or warning lights  
and text messages in the instrument cluster  
and in the Head-up display.  
Several of the lights are checked for  
proper functioning and illuminate tempora-  
rily when the engine is started or the igni-  
tion is switched on.  
127  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Forward Collision Warning  
Warning light illuminates: Risk of  
Red lights  
Seat belt reminder  
collision, e.g., with a vehicle, is de-  
tected. Increased awareness is re-  
Indicator light flashes or is illumi-  
nated: seat belt on the driver or pas-  
quired.  
senger's side is not buckled. The seat  
belt reminder can also be activated if ob-  
jects are placed on the front passenger seat.  
Warning light flashes: Risk of imminent col-  
lision with a vehicle is detected. Intervene  
immediately by braking or make an evasive  
maneuver.  
Make sure that the seat belts are positioned  
correctly.  
Pedestrian Warning  
Airbag system  
Warning light flashes and acoustic  
signal sounds: Collision with a per-  
son is imminent. Intervene immedi-  
ately by braking or make an evasive maneu-  
ver.  
Warning light illuminates briefly:  
Indicates the operational readiness  
of the entire airbag system and  
seat belt tensioners when the ignition is  
switched on.  
Warning light illuminates continuously:  
There is a malfunction. Have the vehicle  
checked immediately by an authorized serv-  
ice center or another qualified service cen-  
ter or repair shop.  
Instrument cluster without enhanced  
features: orange lights  
Active Cruise Control  
The number bars shows the selected  
distance from the vehicle driving  
ahead.  
Operational readiness of airbag system, re-  
fer to page 155.  
Camera-based cruise control, refer to  
page 183.  
Parking brake, electric  
The parking brake is set.  
For releasing the parking brake, re-  
fer to page 107.  
Active Cruise Control, vehicle detection  
Warning light illuminates: Vehicle  
has been detected ahead of you.  
Brake system  
Warning light flashes: Conditions are  
not adequate for the system to work.  
Brake pads are worn or there is a  
fault in the brake system.  
The system was deactivated but applies the  
brakes until the driver actively resumes  
control of the vehicle by pressing on the  
brake pedal or accelerator pedal.  
The braking assistance may not be  
operational. A higher pedal force  
may be required for braking.  
Have the vehicle checked immediately by  
an authorized service center or another  
qualified service center or repair shop.  
128  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Reduce your speed and stop cautiously.  
Avoid sudden braking and steering maneu-  
vers.  
Yellow lights  
Antilock Braking System  
Flat tire monitor, refer to page 162.  
The system may not be operational.  
The Antilock Braking System system  
is not available.  
Tire pressure monitor  
The ability to steer may be restricted  
during full braking.  
Warning light illuminates: Tire Pres-  
sure Monitor is indicating a flat tire  
or tire pressure loss. Follow the in-  
Have checked immediately by an authorized  
service center or another qualified service  
center or repair shop.  
formation in the Check Control message.  
Warning light flashes then illuminates con-  
tinuously: Flat tires or tire pressure losses  
cannot be detected.  
Antilock Braking System, refer to page 178.  
–
Fault caused by systems or devices with  
the same radio frequency: after leaving  
the area of the interference, the system  
automatically becomes active again.  
Dynamic Stability Control  
Warning light flashes: Dynamic Sta-  
bility Control is regulating the drive  
and brake power. The vehicle is sta-  
–
–
The Tire Pressure Monitor could not  
complete the reset: reset the system  
again.  
bilized. Reduce speed and modify your driv-  
ing style to the driving circumstances.  
Warning light illuminates: Dynamic Stabil-  
ity Control has failed.  
A wheel without wheel electronics is  
mounted: have it checked by an author-  
ized service center or another qualified  
service center or repair shop as needed.  
Have the vehicle checked by an authorized  
service center or another qualified service  
center or repair shop.  
–
Malfunction: have the vehicle checked  
by an authorized service center or an-  
other qualified service center or repair  
shop.  
Dynamic Stability Control, refer to  
page 178.  
The Dynamic Stability Control deactivated  
or the Dynamic Traction Control activated  
Tire pressure monitor, refer to page 157.  
The Dynamic Stability Control is de-  
activated or the Dynamic Traction  
Control is activated.  
Steering system  
Steering system may be faulty.  
Have the vehicle checked by an au-  
thorized service center or another  
qualified service center or repair shop.  
Dynamic Stability Control, refer to  
page 178, and Dynamic Traction Control,  
refer to page 180.  
Emissions  
Flat tire monitor  
–
The warning light illuminates:  
Warning light illuminates: Flat Tire  
Monitor is indicating a flat tire or  
tire pressure loss.  
129  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Emissions are deteriorating.  
Have the vehicle checked as soon  
as possible.  
High beams are switched on and off auto-  
matically depending on the traffic situation.  
Automatic High Beam Assistant, refer to  
page 149.  
–
The warning light flashes under certain  
circumstances:  
This indicates that there is excessive  
misfiring in the engine.  
Cruise Control  
The system is switched on. It main-  
tains the speed that was predefined  
using the control elements on the  
steering wheel.  
Reduce the vehicle speed and have the  
vehicle checked immediately; otherwise,  
serious engine misfiring within a brief  
period can seriously damage emission  
control components, in particular the  
catalytic converter.  
Manual Speed Limiter  
Socket for OBD on-board diagnostics, refer  
to page 282.  
The indicator light illuminates: the  
system is switched on.  
The indicator light flashes: the set  
speed limit has been exceeded. If this hap-  
pens, a signal sounds.  
Green lights  
Turn signal  
Reduce speed or deactivate system.  
Turn signal switched on.  
Instrument cluster without enhanced  
features: Lane Departure Warning  
Unusually rapid flashing of the indi-  
cator light indicates that a turn sig-  
nal bulb has failed.  
The indicator light illuminates: the  
system is activated. At least one lane  
marking was detected and warnings  
can be issued.  
Turn signal, refer to page 108.  
Parking lights, headlights  
Lane departure warning, refer to page 172.  
Parking lights or headlights are  
switched on.  
Instrument cluster with enhanced  
features: Lane Departure Warning  
Parking lights/low beams, headlight  
control, refer to page 147.  
The indicator light illuminates: the  
system is activated. At least one lane  
marking was detected and warnings  
can be issued.  
Front fog lights  
Front fog lights are switched on.  
Front fog lights, refer to page 150.  
Lane departure warning, refer to page 172.  
Automatic High Beam Assistant  
Automatic High Beam Assistant is  
switched on.  
130  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
"Check Control"  
CONTROLS  
4.  
Blue lights  
High beams  
5. Select the desired text message.  
High beams are switched on.  
Display  
High beams, refer to page 108.  
Check Control  
At least one Check Control message  
is displayed or stored.  
Hiding Check Control messages  
Text messages  
Text messages in combination with an icon  
in the instrument cluster explain a Check  
Control message and the meaning of the  
indicator/warning lights.  
Supplementary text messages  
Press the button on the turn signal lever.  
Additional information, such as on the  
cause of an error or the required action, can  
be called up via Check Control.  
Continuous display  
With urgent messages the added text will  
be automatically displayed on the control  
display.  
Some Check Control messages are displayed  
continuously and are not cleared until the  
fault is eliminated. If several faults occur  
at once, the messages are displayed consec-  
utively.  
Depending on the Check Control message,  
further help can be selected.  
Via the Central Information Display (CID):  
The messages can be hidden for approx.  
8 seconds. After this time, they are dis-  
played again automatically.  
1.  
"My MINI"  
2. "Vehicle status"  
Temporary display  
3. Tilt the Controller to the left.  
Some Check Control messages are hidden  
automatically after approx. 20 seconds. The  
Check Control messages are stored and can  
be displayed again later.  
4.  
"Check Control"  
5. Select the desired text message.  
6. Select the desired setting.  
Messages after trip completion  
Displaying stored Check Control  
messages  
Via the Central Information Display (CID):  
Certain messages displayed while driving  
are displayed again after the ignition is  
switched off.  
1.  
"My MINI"  
2. "Vehicle status"  
3. Tilt the Controller to the left.  
131  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Fuel gauge  
Odometer and trip odometer  
Principle  
Principle  
The current fill level of the fuel tank is dis-  
played.  
The total kilometers driven and the kilome-  
ters driven since the last reset are displayed  
in the instrument cluster.  
General information  
Vehicle inclination may cause the display to  
vary.  
Instrument cluster without  
additional functions: reset trip  
distance  
Information on refueling, refer to page 248.  
Press the button.  
Instrument cluster without  
enhanced features: display  
–
The odometer is displayed  
when the ignition is  
switched off.  
The arrow beside the fuel  
pump icon shows which side  
of the vehicle the fuel filler  
flap is on.  
–
When the ignition is  
switched on, the trip od-  
ometer is reset.  
Instrument cluster with enhanced  
features: reset trip distance  
Instrument cluster with enhanced  
features: display  
Press the button.  
The arrow beside the fuel  
pump icon shows which side  
of the vehicle the fuel filler  
flap is on.  
–
The odometer is displayed  
when the ignition is  
switched off.  
–
When the ignition is  
switched on, the trip od-  
ometer is reset.  
Indicator light in the instrument  
cluster  
The yellow indicator light illumi-  
nates, once the fuel reserve is  
reached.  
Outside temperature  
General information  
If the indicator drops to +37 ℉/+3 ℃, a  
signal sounds.  
Tachometer  
A Check Control message is displayed.  
There is an increased risk of ice on roads.  
Always avoid engine speeds in the red  
warning field. In this range, the fuel supply  
is reduced to protect the engine.  
132  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
–
–
–
A Check Control message is displayed  
briefly.  
Safety information  
The remaining range is shown on the  
on-board computer.  
Warning  
Even at temperatures above +37 ℉/+3 ℃  
there is a risk of icy roads, for instance  
on bridges or shady sections of the road.  
There is a risk of accident. Modify your  
driving style to the weather conditions at  
low temperatures.  
With a sporty driving style, for instance  
fast cornering, the engine function is  
not always ensured.  
The Check Control message appears con-  
tinuously below a range of approx.  
30 miles/50 km.  
Display  
Safety information  
The outside temperature is  
displayed in the instrument  
cluster.  
NOTICE  
With a range below 30 miles/50 km,  
the engine may no longer have sufficient  
fuel. Engine functions are not ensured  
anymore. There is a risk of damage to  
property. Refuel promptly.  
Time  
Display  
The time is displayed in the  
instrument cluster.  
Display the current range in the on-board  
computer, refer to page 137.  
Set the time on the Central In-  
formation Display (CID), refer  
to page 47.  
Instrument cluster with ex-  
tended functionality: The cur-  
rent range is permanently  
displayed in the instrument  
cluster.  
Date  
The date is displayed in the  
instrument cluster.  
Current consumption  
Set the date on the Central In-  
formation Display (CID), refer  
to page 47.  
Principle  
Displays the current fuel consumption.  
Check whether you are currently driving  
in an efficient and environmentally-friendly  
manner.  
Range  
General information  
When the remaining range is low:  
133  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Icons  
Icons  
Display  
The current consumption can be dis-  
played on the on-board computer, refer to  
page 137.  
Description  
No service is currently re-  
quired.  
Service notifications  
The time for recommended  
maintenance or a legally  
mandated inspection is ap-  
proaching.  
Principle  
The function displays the service notifica-  
tions and the corresponding maintenance  
scopes.  
Service interval is exceeded.  
General information  
Entering appointment dates  
Enter the dates for the mandatory vehicle  
inspections.  
After the ignition is switched on the instru-  
ment cluster briefly displays available dis-  
tance travelled or time to the next sched-  
uled maintenance.  
Make sure that the vehicle's date and time  
are set correctly.  
A service advisor can read out the current  
service notifications from the vehicle key.  
Via the Central Information Display (CID):  
1.  
"My MINI"  
Display  
2. "Vehicle status"  
3. Tilt the Controller to the left.  
Detailed information on service  
notifications  
4.  
"Service required"  
More information on the type of service  
required may be displayed on the control  
display.  
5. "Vehicle inspection"  
6. "Date:"  
7. Select the desired setting.  
Via the Central Information Display (CID):  
1.  
"My MINI"  
Automatic Service Request  
2. "Vehicle status"  
Data regarding the service status or legally  
mandated vehicle inspections is automati-  
cally sent to your authorized service center  
before the vehicle is due for service.  
3. Tilt the Controller to the left.  
4.  
"Service required"  
Maintenance work and legally mandated  
inspections are displayed.  
You can check when your authorized serv-  
ice center was notified.  
5. Select an entry to call up detailed infor-  
mation.  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "Vehicle status"  
134  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
3. Tilt the Controller to the left.  
4. "Teleservice Call"  
Speed Limit Info  
Speed Limit Info  
Principle  
Gear shift indicator  
Speed Limit Info shows the current max-  
imum permitted speed in the instrument  
cluster.  
Principle  
The system recommends the most efficient  
gear for the current driving situation.  
General information  
The camera at the base of the interior mir-  
ror detects traffic signs at the edge of the  
road as well as overhead sign posts. Traffic  
signs with extra icons for wet road condi-  
tions, etc., are also detected and compared  
with the vehicle's onboard data, such as  
from the rain sensor, and will be displayed  
depending on the situation.  
General information  
Depending on the vehicle equipment and  
country version, the gear shift indicator is  
active in the manual mode of the Steptronic  
transmission and with manual transmission.  
Suggestions to upshift or downshift are dis-  
played in the instrument cluster.  
With the navigation system, the system  
takes into account the information stored in  
the navigation data and also displays speed  
limits present on routes without signs.  
Manual transmission: displaying  
Example Description  
Efficient gear is set.  
Safety information  
Depending on the equipment  
version, shift to a more effi-  
cient gear.  
Warning  
The system cannot serve as a substitute  
for the driver’s personal judgment in as-  
sessing the traffic situation. Based on the  
limits of the system, it cannot independ-  
ently react to all traffic situations. There is  
a risk of accident. Adjust driving style to  
traffic conditions. Watch the surrounding  
traffic situation closely, be ready to take  
over steering and braking at any time, and  
actively intervene where appropriate.  
Steptronic transmission: displaying  
Example Description  
Efficient gear is set.  
Depending on the equipment  
version, shift to a more effi-  
cient gear.  
135  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Speed Limit Info  
Overview  
The last speed limit detected.  
Camera  
With navigation system:  
Speed Limit Info is not availa-  
ble.  
Speed Limit Info can also be displayed in  
the Head-up display.  
The camera is installed near the interior  
mirror.  
Keep the windshield in front of the interior  
mirror clean and clear.  
System limits  
The system function may be limited and  
may provide incorrect information in the  
following situations:  
Display  
–
–
–
–
–
In heavy fog, wet conditions, or snow-  
fall.  
Depending on the vehicle equipment, Speed  
Limit Info is displayed permanently in the  
instrument cluster or via the on-board com-  
puter.  
When traffic signs are fully or partially  
concealed by objects, stickers or paint.  
When driving very close to the vehicle  
in front of you.  
When driving toward bright lights or  
strong reflections.  
When the windshield in front of the in-  
terior mirror is fogged up, dirty or cov-  
ered by a sticker, etc.  
–
–
–
–
In the event of incorrect detection by  
the camera.  
Press button on the turn signal lever several  
times, if needed.  
If the speed limits stored in the naviga-  
tion system are incorrect.  
Speed Limit Info is displayed in the instru-  
ment cluster.  
In areas not covered by the navigation  
system.  
When roads deviate from the naviga-  
tion, such as due to changes in road  
layout.  
–
–
When passing buses or trucks with a  
speed sticker.  
If the traffic signs are non-conforming.  
136  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
–
–
When traffic signs that are valid for a  
parallel road are detected.  
Instrument cluster with enhanced  
features: display  
During calibration of the camera imme-  
diately after vehicle delivery.  
Selection lists  
General information  
Depending on the vehicle equipment, the  
buttons on the steering wheel and the dis-  
play in the instrument cluster can be used  
to display or use the following:  
On-board computer  
–
–
–
Current audio source.  
Phone redial.  
Principle  
Turn on voice activation system.  
The on-board computer displays different  
vehicle data in the instrument cluster, such  
as average values.  
Activating a list and adjusting the  
setting  
Calling up information  
Button on the  
steering wheel  
Function  
Move selection up.  
Move selection  
down.  
Confirm the selec-  
tion.  
Press the button on the turn signal lever.  
Instrument cluster without  
enhanced features: display  
Information is displayed in the instrument  
cluster.  
Information at a glance  
Repeatedly pressing the but-  
ton on the turn signal lever  
calls up the following informa-  
tion:  
137  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
–
–
Range.  
3. "Displays"  
GREEN Info.  
4. "Instrument panel"  
5. Select the desired setting.  
When GREEN Mode is activated.  
Average consumption, fuel.  
–
–
Settings are stored for the profile currently  
used.  
Average consumption since delivery  
from the factory.  
Information in detail  
Range  
Displays the estimated cruising range avail-  
able with the remaining fuel.  
–
–
–
–
–
Current consumption, fuel.  
Average speed.  
Date.  
Engine temperature display.  
With equipment version with Head-up  
display and navigation:  
The range is calculated based on your driv-  
ing style over the last 20 miles/30 km.  
Distance to destination.  
GREEN info  
The achieved range extension may be dis-  
played as a bonus range.  
When destination guidance is activated  
in the navigation system.  
–
–
With equipment version with Head-up  
display and navigation:  
Average fuel consumption  
The average consumption is calculated for  
the period while the engine is running.  
Arrival time.  
When destination guidance is activated  
in the navigation system.  
The average consumption is calculated for  
the distance traveled since the last reset by  
the on-board computer.  
Instrument cluster without enhanced  
features:  
Speed Limit Info.  
Vehicle speed.  
Trip odometer.  
–
–
Average speed  
Periods in which the vehicle is parked  
with the engine manually stopped are not  
included in the calculation of the average  
speed.  
The unit of measurement of some informa-  
tion can be changed.  
Setting units of measurement, refer to  
page 48.  
Selecting information  
Depending on the vehicle equipment, you  
can select what information from the on-  
board computer can be accessed in the in-  
strument cluster.  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "System settings"  
138  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Instrument cluster without enhanced  
features: display  
Resetting average values  
Press and hold the button on the turn signal  
lever.  
Instrument cluster with enhanced  
features: display  
Engine temperature display  
Principle  
The current engine temperature, based on  
a combination of coolant and engine oil  
temperature is displayed. As soon as the  
optimum operating temperature has been  
attained, the indicator is in the center posi-  
tion.  
General information  
Distance to destination  
If the engine oil or coolant, and thus the  
engine, become too hot, a Check Control  
message is displayed too.  
Depending on the vehicle equipment, the  
distance remaining to the destination is dis-  
played if a destination is entered in the nav-  
igation system before the trip is started.  
When the engine temperature is  
too high, a red indicator light is dis-  
played.  
The distance to the destination is adopted  
automatically.  
When the engine oil temperature is  
too high, a red indicator light is dis-  
played.  
Arrival time  
Depending on the vehicle equipment, the  
estimated arrival time is displayed if a desti-  
nation is entered in the navigation system  
before the trip is started.  
To check the coolant level, refer to  
page 279.  
The prerequisite is that the time must be  
correctly set.  
139  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Instrument cluster without additional  
functions: Speed Limit Info  
Resetting the trip computer  
Via the Central Information Display (CID):  
Speed Limit Info shows the current max-  
imum permitted speed in the instrument  
cluster.  
1.  
"My MINI"  
2. "Driving information"  
3. "Trip computer"  
On-board computer on the control  
display  
4. Tilt the Controller to the left, if needed.  
–
–
"Reset": all values are reset.  
"Automatic reset": all values are  
reset approx. 4 hours after the vehi-  
cle has come to a standstill.  
Principle  
The on-board computer displays different  
vehicle data on the control display, such as  
average values.  
5. If necessary, "OK"  
General information  
Two types of on-board computers are availa-  
ble on the control display:  
Driving Excitement  
Principle  
–
"Onboard info": average values, such as  
the consumption, are displayed. The val-  
ues can be reset individually.  
On the control display, sport instruments  
can be displayed, and the vehicle condition  
can be checked before the use of the SPORT  
program.  
–
"Trip computer": the values deliver an  
overview of a specific distance covered  
and can be reset as often as necessary.  
Sport instruments  
General information  
Calling up the on-board computer or  
trip computer  
On the control display, values for power and  
torque are displayed.  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "Driving information"  
Displaying sport instruments  
3. "Onboard info" or "Trip computer"  
Via the Central Information Display (CID):  
1.  
"My MINI"  
Resetting the on-board computer  
Via the Central Information Display (CID):  
2. "Technology in action"  
3. "Sport displays"  
1.  
"My MINI"  
4.  
"Sports instruments"  
2. "Driving information"  
3. "Onboard info"  
Via MINI Driving Modes switch:  
1. Activate SPORT.  
2. "Sport displays"  
4. "Consumption" or "Speed"  
5. "OK"  
3.  
"Sports instruments"  
140  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Vehicle condition  
General information  
The following vehicle and surrounding area  
data is automatically checked and evaluated  
in succession:  
Adjusting  
Via the Central Information Display (CID):  
1. "My MINI"  
2. "Vehicle settings"  
3. "Speed warning"  
4. "Warning at:"  
–
–
–
–
Range.  
Engine temperature.  
Outside temperature.  
SPORT program state.  
5. Turn the Controller until the desired  
speed is displayed.  
6. Press the Controller.  
Finally, a total evaluation of the vehicle con-  
dition is displayed.  
Activate/deactivate  
Via the Central Information Display (CID):  
Checking vehicle condition  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "Vehicle settings"  
3. "Speed warning"  
4. "Speed warning"  
1.  
"My MINI"  
2. "Technology in action"  
3. "Sport displays"  
4.  
"Vehicle and surroundings"  
Applying current speed as the  
speed warning  
Via the MINI Driving Modes switch:  
Via the Central Information Display (CID):  
1. Activate SPORT.  
2. "Sport displays"  
1.  
"My MINI"  
3.  
"Vehicle and surroundings"  
2. "Vehicle settings"  
3. "Speed warning"  
4. "Select current speed"  
Speed warning  
Principle  
The system can be used to set a speed limit.  
A warning will be issued when this speed  
limit is exceeded.  
LED ring on the central in-  
strument cluster  
Principle  
General information  
The warning is repeated if the vehicle speed  
exceeds the set speed limit again, after it  
has dropped below it by 3 mph/5 km/h.  
The LED ring displays light animations to  
represent specific functions.  
Basic displays  
Basic functions, for instance the tachome-  
ter, can be set to be displayed continually if  
so desired.  
141  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Event displays  
Adjusting the LED ring  
Functions that are only displayed tempora-  
rily, for instance the volume or temperature  
settings, can be set as event displays.  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "System settings"  
Several vehicle assistance functions can  
also be displayed on the LED ring. This dis-  
play corresponds with the displays of the  
function in the respective display.  
3. "Displays"  
4. "Center Instrument"  
5. "Basic display" or "Event display"  
6. Select the desired setting.  
Example: tachometer  
Like the tachometer in the instrument clus-  
ter, the light animations of the tachometer's  
basic display show the current RPMs and  
the respective RPM warning thresholds.  
Setting the brightness  
The brightness can be adjusted when night  
lighting is active in the instrument cluster.  
Via the Central Information Display (CID):  
Display  
1.  
"My MINI"  
2. "System settings"  
3. "Displays"  
4. "Center Instrument"  
5. "Brightness at night"  
6. Turn the Controller until the desired  
brightness is set.  
7. Press the Controller.  
–
–
–
Arrow 1: current RPM.  
The setting is stored for the driver profile  
currently used.  
Arrow 2: Advance warning zone.  
Arrow 3: warning field.  
Switching on/off LED ring  
Via the Central Information Display (CID):  
MINI Head-up display  
Principle  
1.  
"My MINI"  
The Head-up display projects important in-  
formation in the driver's field of view, for  
instance the speed.  
2. "System settings"  
3. "Displays"  
4. "Center Instrument"  
5. "Center Instrument"  
General information  
Follow the instructions for cleaning the  
Head-up display. For additional information,  
see the chapter on care.  
142  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Via the Central Information Display (CID):  
1. "My MINI"  
Safety information  
Warning  
2. "System settings"  
3. "Displays"  
When extending and retracting the projec-  
tion screen of the Head-up display, body  
parts can be jammed. There is a risk of in-  
jury. Make sure that the area of movement  
of the projection screen is clear when ex-  
tending and retracting.  
4. "Head-Up Display"  
5. "Head-Up Display"  
Display  
Overview  
The following information is displayed on  
the Head-up display:  
NOTICE  
The Head-up display consists of sensitive  
components that can easily be scraped or  
damaged. There is a risk of damage to  
property. Do not place any objects on the  
Head-up display, attach to system compo-  
nents or plug into the system. Do not move  
the moving parts manually.  
–
–
–
–
Vehicle speed.  
Navigation instructions.  
Check Control messages.  
Selection list from the instrument clus-  
ter.  
–
Driver assistance systems.  
Some of this information is only displayed  
briefly as needed.  
Overview  
Selecting displays in the Head-up  
display  
Via the Central Information Display (CID):  
1.  
"My MINI"  
2. "System settings"  
3. "Displays"  
4. "Head-Up Display"  
5. "Displayed information"  
The Head-up display is switched on.  
Switching the Head-up display  
on/off  
When switching on, the projection screen  
of the Head-up display is extended. When  
switching off, the projection screen of the  
Head-up display is retracted again.  
6. Select the desired displays in the Head-  
up display.  
Settings are stored for the driver profile  
currently used.  
Setting the brightness  
The brightness is automatically adjusted to  
the ambient brightness.  
The base setting can be adjusted manually.  
143  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Via the Central Information Display (CID):  
1. "My MINI"  
Via the Central Information Display (CID):  
1. "My MINI"  
2. "System settings"  
3. "Displays"  
2. "System settings"  
3. "Displays"  
4. "Head-Up Display"  
5. "Brightness"  
4. "Head-Up Display"  
5. "Rotation"  
6. Turn the Controller until the desired  
brightness is set.  
6. Turn the Controller until the desired set-  
ting is selected.  
7. Press the Controller.  
7. Press the Controller.  
When the low beams are switched on, the  
brightness of the Head-up display can be  
adjusted using the instrument lighting, re-  
fer to page 151.  
The setting is stored for the driver profile  
currently used.  
Display visibility  
The setting is stored for the driver profile  
currently used.  
The visibility of the displays in the Head-up  
display is influenced by the following fac-  
tors:  
Adjusting the height  
Via the Central Information Display (CID):  
–
–
Certain seat positions.  
Objects on the cover of the Head-up dis-  
play.  
1.  
"My MINI"  
–
Sunglasses with certain polarization fil-  
ters.  
2. "System settings"  
3. "Displays"  
–
–
Wet road.  
4. "Head-Up Display"  
5. "Height"  
Unfavorable light conditions.  
6. Turn the Controller until the desired  
height is reached.  
John Cooper Works: sport dis-  
plays in the Head-up display  
7. Press the Controller.  
The setting is stored for the driver profile  
currently used.  
General information  
The height of the Head-up display can also  
be stored using the memory function, refer  
to page 89.  
The sport displays in the Head-up display  
assist with a sporty driving style.  
Turning on  
Via the Central Information Display (CID):  
Setting the rotation  
The screen of the Head-up display can be  
rotated around its own axis.  
1.  
"My MINI"  
2. "System settings"  
3. "Displays"  
4. "Head-Up Display"  
144  
Online Edition for Part no. 01405A7B0F2 - II/23  
Displays  
CONTROLS  
Upshift immediately when the red fields il-  
luminate.  
5. "Displayed information"  
6. "Sport displays"  
When the maximum RPM is reached, the  
entire display flashes red and the fuel sup-  
ply is interrupted in order to protect the  
engine.  
With navigation system: if the sport dis-  
plays are switched on, no navigation con-  
tent will be displayed on the Head-up dis-  
play.  
Display  
Vehicle status  
General information  
The status can be displayed and actions per-  
formed for several systems.  
Going to the vehicle status  
Via the Central Information Display (CID):  
1.  
"My MINI"  
1
2
3
4
5
Vehicle speed  
Shift lights  
2. "Vehicle status"  
3. Tilt the Controller to the left.  
Gear display  
Current RPM  
Warning field, speed  
Information at a glance  
Icons  
Description  
Shift lights  
Principle  
"Flat Tire Monitor": Status  
of the flat tire monitor, refer  
to page 162.  
The Shift lights in the Head-up display indi-  
cates the optimum shift point. Thus, with a  
sporty driving style, the best possible vehi-  
cle acceleration is achieved.  
"Tire Pressure Monitor": sta-  
tus of the Tire Pressure  
Monitor, refer to page 157.  
"Engine oil level": electronic  
oil-level check, refer to  
page 275.  
Functional requirements  
–
Steptronic Sport transmission:  
"Check Control": Check Con-  
trol messages are stored  
in the background and can  
be displayed on the control  
display. Displaying stored  
Check Control messages, re-  
fer to page 131.  
Manual mode M/S and, if necessary Dy-  
namic Traction Control are activated.  
–
Press the accelerator pedal all the way  
down.  
Display  
Successive gray illuminated fields indicate  
the upcoming shift point.  
145  
Online Edition for Part no. 01405A7B0F2 - II/23  
CONTROLS  
Displays  
Icons  
Description  
"Service required": display-  
ing service notifications, re-  
fer to page 134.  
"Teleservice Call"  
146  
Online Edition for Part no. 01405A7B0F2 - II/23  

Related Topics

CONTROLS
Opening and closing (key fob battery replacement) Seats, mirrors and steering wheel Transporting children safely Driving (windshield wipers) Lights Safety (tire pressure) Driving stability control systems Driving comfort (parking sensors) Climate control Interior equipment Storage compartments Cargo area

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot