Get CONTROLS -> Interior equipment Guide for Mini Clubman SUV Second Generation (2015-2024)

CONTROLS

Interior equipment

Safety information

Vehicle features and options

This chapter describes all standard, coun-

try-specific and optional equipment offered

with the series. It also describes features

and functions that are not necessarily avail-

able in the vehicle, e.g., due to the selected

options or country versions. This also ap-

plies to safety-related functions and sys-

tems. When using these functions and sys-

tems, the applicable laws and regulations

must be observed.

Warning

The operation of remote-controlled sys-

tems with the integrated universal remote

control, such as the garage door, may re-

sult in injury, for example, body parts be-

coming jammed in a garage door. There is

a risk of injury or risk of damage to prop-

erty. Make sure that the travel path of the

respective system is clear during program-

ming and operation. Also follow the safety

information for the hand-held transmitter.

Integrated universal remote

control

Compatibility

If this icon is printed on the packag-

ing or in the operating instructions

of the system to be controlled, the

Principle

The integrated Universal Remote Control

in the interior mirror can operate up to

3 functions of remote-controlled systems

such as garage door drives, barriers, or

lighting systems.

system is generally compatible with the

integrated Universal Remote Control.

Additional questions are answered by:

–

An authorized service center or another

qualified service center or repair shop.

General information

–

The Integrated Universal Remote Control

replaces up to 3 different hand-held trans-

mitters. To operate the remote control, the

buttons on the interior mirror must be pro-

grammed with the desired functions. The

hand-held transmitter for the particular sys-

tem is required in order to program the re-

mote control.

HomeLink is a registered trademark of Gen-

tex Corporation.

Before selling the vehicle, delete the stored

functions for the sake of security.

If possible, do not install the antenna of the

remote-controlled system, e.g. the garage

door drive, near metal objects to ensure the

best possible operation.

214

Online Edition for Part no. 01405A7B0F2 - II/23

Interior equipment

CONTROLS

down the interior mirror button and re-

peatedly press and release the hand-held

transmitter button for 2 seconds.

Overview

–

The LED illuminates green: program-

ming completed.

6.

Release the button.

–

The LED flashes fast: programming

is not complete.

Press the button on the interior

mirror for 2 seconds and release.

Perform this procedure three times

to complete the programming proce-

dure.

1

2

3

LED

Programmable keys

Hand-held transmitters of the system

If the integrated universal remote

control remains nonoperational, con-

tinue with the special features for

change code wireless systems.

Programming

General information

–

LED does not flash green after

60 seconds: programming not com-

pleted.

The battery of the hand-held transmitter

must be fully charged at the time of pro-

gramming to ensure an optimal range of the

integrated universal remote control.

Repeat steps 3 to 6.

To program other functions on other but-

tons, repeat steps 3 to 5.

1. Turn on the ignition.

2. Initial commissioning:

Special feature of the rolling code

wireless system

If you are unable to operate the system af-

ter repeated programming, please check if

the system to be controlled features a roll-

ing code radio system.

Press and hold the two outer buttons

on the interior mirror simultaneously for

approximately 10 seconds until the LED

flashes green rapidly. This erases all pro-

gramming of the buttons on the interior

mirror.

Refer to the operating instructions for the

system.

3. Press the interior mirror button to be

programmed. The LED on the interior

mirror will slowly begin flashing orange.

For systems with a rolling code radio sys-

tem, the integrated universal remote control

and the system also have to be synchron-

ized.

4. Hold the hand-held transmitter for the

system to be used approx. 1 to 12 in/2.5

to 30 cm away from the buttons on the

interior mirror. The required distance

depends on the hand-held transmitter.

Please read the operating instructions to

find out how to synchronize the system.

Synchronizing is easier with the aid of a

second person.

5. Press and hold the button of the desired

function on the hand-held transmitter.

Canada: if programming with the hand-

held transmitter was interrupted, hold

215

Online Edition for Part no. 01405A7B0F2 - II/23

CONTROLS

Interior equipment

Synchronizing the universal remote control

with the system:

Release the button.

–

The LED flashes fast: the hand-held

transmitter was detected but pro-

gramming is not complete.

1. Park the vehicle within range of the re-

mote-controlled system.

Press the button on the interior

mirror for 2 seconds and release.

Perform this procedure three times

to complete the programming proce-

dure.

2. Program the relevant button on the inte-

rior mirror as described.

3. Locate and press the synchronizing but-

ton on the system being programmed,

e.g. at the garage gate. You have approx.

30 seconds for the next step.

If the integrated universal remote

control remains nonoperational, con-

tinue with the special features for

change code wireless systems.

4. Hold down the programmed button on

the interior mirror for approximately

3 seconds and then release it. If nec-

essary, repeat this step up to three

times in order to end synchronization.

Once synchronization is complete, the

programmed function will be carried

out.

–

LED does not flash green after

60 seconds: programming not com-

pleted.

Repeat steps 3 to 6.

If the programming procedure is not com-

pleted, the previous programming will re-

main unchanged.

Reprogramming individual buttons

1. Turn on the ignition.

Operation

2. Press and hold the interior mirror but-

ton to be programmed.

Warning

3. As soon as the LED on the interior mir-

ror flashes orange after approx. 20 sec-

onds, release the button.

The operation of remote-controlled sys-

tems with the integrated universal remote

control, such as the garage door, may re-

sult in injury, for example, body parts be-

coming jammed in a garage door. There is

a risk of injury or risk of damage to prop-

erty. Make sure that the travel path of the

respective system is clear during program-

ming and operation. Also follow the safety

information for the hand-held transmitter.

4. Hold the hand-held transmitter for the

system to be used approx. 1 to 12 in/2.5

to 30 cm away from the buttons on the

interior mirror. The required distance

depends on the hand-held transmitter.

5. Press and hold the button of the desired

function on the hand-held transmitter.

Canada: if programming with the hand-

held transmitter was interrupted, hold

down the interior mirror button and re-

peatedly press and release the hand-held

transmitter button for 2 seconds.

The system, such as the garage door, can

be operated using the button on the interior

mirror while the engine is running or when

the ignition is started. To do this, hold down

the button within receiving range of the

system until the function is activated. The

interior mirror LED stays illuminated while

the wireless signal is being transmitted.

6. The LED can illuminate in different

ways.

–

The LED illuminates green: the pro-

gramming procedure is completed.

216

Online Edition for Part no. 01405A7B0F2 - II/23

Interior equipment

CONTROLS

Deleting stored functions

Mirror display

All stored functions will be deleted. The

functions cannot be deleted individually.

The compass shows the current driving di-

rection.

Press and hold the two outer buttons on the

interior mirror simultaneously for approxi-

mately 10 seconds until the LED on the

interior mirror flashes green fast.

Operating concept

Various functions can be called up by press-

ing the adjustment knob with a pointed

object, such as the tip of a ballpoint pen

or similar object. The following adjustment

ranges are displayed in succession, depend-

ing on how long the adjustment knob is

pressed:

Digital compass

Overview

–

Pressed briefly: turns display on/off.

3 to 6 seconds: compass zone setting.

6 to 9 seconds: compass calibration.

9 to 12 seconds: left/right-hand drive

setting.

–

12 to 15 seconds: language setting.

Setting the compass zones

Sets the particular compass zones on the ve-

hicle so that the compass operates correctly;

refer to World map with compass zones.

1

2

Adjustment knob

Mirror display

217

Online Edition for Part no. 01405A7B0F2 - II/23

CONTROLS

Interior equipment

World map with magnetic zones

–

The wrong compass point is displayed.

Procedure

The point of the compass displayed does

not change despite changing the driving

direction.

1. Press and hold the adjustment knob for

approx. 3 to 4 seconds. The number of

the set compass zone appears in the mir-

ror.

–

Not all points of the compass are dis-

played.

2. To change the zone setting, press the

adjustment knob quickly and repeatedly

until the number of the compass zone

that corresponds with your location ap-

pears in the mirror.

Procedure

1. Make sure that there are no large metal-

lic objects or overhead power lines near

the vehicle and that there is sufficient

room to drive around in a circle.

The set zone is stored automatically. The

compass is ready for use again after approx-

imately 10 seconds.

2. Set the currently valid compass zone.

3. Press and hold the adjustment knob for

approx. 6 to 7 seconds so that "C" ap-

pears on the display. Next, drive in a

complete circle at least once at a speed

of no more than 4 mph/7 km/h. If cali-

bration is successful, the "C" is replaced

by the points of the compass.

Calibrating the digital compass

The digital compass must be calibrated in

the event of the following:

218

Online Edition for Part no. 01405A7B0F2 - II/23

Interior equipment

CONTROLS

Left/right-hand drive vehicle

Ashtray

The digital compass is already set for right

or left-hand drive vehicle at the factory.

In order to empty the ashtray, remove the

ashtray from the cup holder.

Adjusting the language

Cigarette lighter

Safety information

Press and hold the adjustment knob for ap-

prox. 12 to 13 seconds. Briefly press the

adjustment knob again to switch between

English "E" and German "O".

Warning

Settings are stored automatically after ap-

proximately 10 seconds.

Contact with the hot heating element or

the hot socket of the cigarette lighter can

cause burns. Flammable materials can ig-

nite if the cigarette lighter falls down or

is held against objects. There is a risk of

fire and an injury hazard. There is a risk of

damage to property. Take hold of the ciga-

rette lighter by its handle. Make sure that

children do not use the cigarette lighter.

Sun visor

Glare shield

To provide protection against glare, fold the

sun visor down or pivot it to the side.

Vanity mirror

A vanity mirror is located in the sun visor

behind a cover.

Warning

If metal objects fall into the socket, they

can cause a short circuit. There is a risk of

injury or risk of damage to property. Insert

the cigarette lighter or socket cover again

after using the socket.

When the cover is opened, the mirror light-

ing switches on.

Ashtray/cigarette lighter

Operation

Push in the cigarette lighter.

Overview

The cigarette lighter can be

removed as soon as it pops

back out.

Sockets

Principle

The ashtray is located in one of the frontal

cup holders, the cigarette lighter above it in

the center console.

The socket can be used for electronic devi-

ces while the ignition is switched on or the

engine is running.

219

Online Edition for Part no. 01405A7B0F2 - II/23

CONTROLS

Interior equipment

General information

In the center console

The total load of all sockets must not exceed

140 watts at 12 volts.

Do not damage the socket by using unsuita-

ble connectors.

Safety information

Warning

Devices and cables in the unfolding area

of the airbags, such as portable navigation

devices, can hinder the unfolding of the

airbag or be thrown around in the car's

interior during unfolding. There is a risk of

injury. Make sure that devices and cables

are not in the airbag's area of unfolding.

Remove the cover or cigarette lighter.

In the cargo area

Warning

Battery chargers that charge the vehicle

battery via sockets or cigarette lighters in

the vehicle may overload or damage the

12 V electrical system. There is a risk of

injury or risk of damage to property. Only

connect battery chargers for the vehicle

battery to the jump-start terminals in the

engine compartment.

The socket is located on the right side in

the cargo area.

USB port

Warning

General information

If metal objects fall into the socket, they

can cause a short circuit. There is a risk of

injury or risk of damage to property. Insert

the cigarette lighter or socket cover again

after using the socket.

Follow the information regarding the con-

nection of mobile devices to the USB port

in the section on USB connections, refer to

page 54.

220

Online Edition for Part no. 01405A7B0F2 - II/23

Interior equipment

CONTROLS

In the front center console

Under the center armrest

The USB port is located in the front of the

center console.

The USB port is located under the center

armrest.

Properties:

–

USB port Type A.

–

USB port Type C.

For charging mobile devices and for

data transfer.

For charging of mobile devices.

Charge current: max. 3 A.

–

Charge current: max. 1.5 A.

In the rear center console

Wireless charging tray

Principle

The wireless charging tray enables the fol-

lowing functions to be performed without

cables:

–

Charging the rechargeable battery of a

mobile phone with Qi capability and of

other mobile devices, which support the

Qi standard.

One USB dual charge socket is located in

the rear center console.

Connect the mobile phone to the exter-

nal antenna.

Depending on the country, this provides

for better network reception and a con-

sistent reproduction quality.

Properties:

–

USB port Type C.

For charging of mobile devices.

Charge current: max. 3 A.

General information

When inserting the mobile phone, make

sure there are no objects between it and the

wireless charging tray.

During charging, the surface of the tray and

the mobile phone may heat up. Higher tem-

peratures may lead to a reduction in the

221

Online Edition for Part no. 01405A7B0F2 - II/23

CONTROLS

Interior equipment

charge current through the mobile phone,

and in isolated cases the charging process

is paused temporarily. Follow the relevant

instructions in the mobile phone owner's

manual.

NOTICE

The tray is intended for mobile phones up

to a particular size. Forceful inserting of

the mobile phone into the tray can damage

the tray or the mobile phone. There is a

risk of damage to property. Observe the

maximum dimensions for mobile phones.

Do not force the mobile phone into the

tray.

NOTE

This device has been tested for human ex-

posure limits and found compliant at a mini-

mum distance of 4 in/10 cm during opera-

tion.

Therefore, a distance of 4 in/10 cm must

be maintained in every direction when op-

erating the device.

Functional requirements

–

Ignition or standby state is switched on.

–

The mobile phone must compatibly sup-

port the required Qi standard. Compati-

ble mobile phones, refer to page 52.

If the mobile phone does not support the

Qi standard, the mobile phone can be

charged using a special Qi-compatible

charging case.

–

Use only protective sleeves and cov-

ers up to a maximum thickness of

0.07 in/2 mm. Otherwise, the charging

function may be impaired.

Mounting position of the product.

Safety information

Warning

The mobile phone must not exceed the

maximum size of approximately 5.9 x

3.07 x 0.62 in/150 x 78 x 16 mm.

Overview

The wireless charging tray is located in the

center armrest.

When charging a Qi-compatible device in

the wireless charging tray, any metal ob-

jects on the tray together with the device

can become very hot. If storage media

or electronic cards, e.g., chip cards, cards

with magnetic strips, or cards that trans-

mit signals, are placed on the tray together

with the device, they may not function

correctly. There is a risk of injury and

risk of damage to property. When charg-

ing mobile devices, make sure there are

no objects on the tray together with the

device.

222

Online Edition for Part no. 01405A7B0F2 - II/23

Interior equipment

CONTROLS

LED displays

Color

Meaning

Blue

The mobile phone is charging.

Depending on the model, the

blue LED is no longer illumi-

nated once the inserted mobile

phone with Qi capability is fully

charged.

1

2

3

Front holder with LED

Storage area

Or-

ange

The mobile phone is not charg-

ing.

Movable retaining clip

Temperature on the mobile

phone possibly too high or for-

eign object in the charging tray.

Inserting the mobile phone

1. Open the center armrest.

Red

The mobile phone is not charg-

ing.

2. Push back the retaining clip.

Contact an authorized service

center or another qualified serv-

ice center or repair shop.

3. Insert the mobile phone with the display

facing upward in the direction of the

front holder, arrow 1.

System limits

At high temperatures on the mobile phone

or in the vehicle, the charging functions of

the mobile phone may be limited and some

functions may no longer work.

LTE-Compensator - Information

and User Manual

4. Place the mobile phone in the storage

area, arrow 2.

Your car is equipped with a wireless charg-

ing tray (WCA) to charge your mobile phone

and connect it to the mobile network. To

ensure the best possible connection a sig-

nal booster (LTE-Compensator) is used in

conjunction with the WCA. The following

paragraphs refer to this booster:

5. Push the retaining clip forward and clip

the mobile phone in the tray.

6. Close the center armrest.

Removing the mobile phone

1. Open the center armrest.

This is a CONSUMER device.

BEFORE USE, you MUST REGISTER THIS

DEVICE with your wireless provider and

have your provider's consent. Most wireless

providers consent to the use of Compensa-

tors. Some providers may not consent to

the use of this device on their network. If

2. Push the retaining clip back and remove

the mobile phone.

223

Online Edition for Part no. 01405A7B0F2 - II/23

CONTROLS

Interior equipment

tennas or coupling devices will cause the

you are unsure, contact your provider. You

MUST operate this device with approved an- cease of the booster´s operating license.

tennas and cables as specified by the man-

The booster device fulfills the network pro-

ufacturer. Antennas MUST be installed at

tection standards as required by the FCC,

least 20 cm (8 inches) from any person.

such as intermodulation limits, oscillation

You MUST cease operating this device im-

detection and gain limits.

mediately if requested by the FCC or a li-

Booster Manufacturer: Kathrein Automotive

censed wireless service provider. Warning

Model Number: LTECOMPB0

Part Number: 6803145-01

FCC-ID: 2ACC7LTECOMPB0

E911 location information may not be pro-

vided or may be inaccurate for calls served

by using this device.

Please observe additionally the following in-

formation

–

Sprint Nextel will allow consumers to

register their signal boosters by calling

their toll-free number.

–

T-Mobile online registration

–

Verizon’s online registration link:

wcms/consumer/register-signal-

).

–

AT&T online registration

online registration

lar/support/).

Before use you must register your booster

device with your wireless provider.

If you should be requested by the FCC to

cease operating your booster, you are not

allowed to insert your mobile phone in the

charging tray anymore unless the booster is

permanently deactivated by your local MINI

dealer.

You must not remove the booster from the

car nor use it with any other than the pre-

installed coupling device or antenna. Any

modification of the existing antenna or cou-

pling device as well as the use of other an-

224

Online Edition for Part no. 01405A7B0F2 - II/23

CONTROLS -> Interior equipment for Your Mini Clubman SUV Second Generation (2015-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals