2001-2005 Mini Cooper 2 Door CONTROLS -> Continuously Variable automatic Transmission (CVT) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Continuously Variable automatic Transmission (CVT) for Your Mini Cooper 2 Door First Generation (2001-2005)

MANUAL TRANSMISSION  
CONTINUOUSLY VARIABLE AUTOMATIC TRANSMISSION (CVT)*  
In addition to the fully automatic mode,  
you can shift gears manually using Step-  
tronic, refer to page 55.  
Reverse gear  
Before selecting reverse gear, ensure the  
vehicle is stationary; then, fully depress the  
clutch pedal and pause briefly before mov-  
ing the gearshift lever into position.  
Selector lever positions  
P R N D M/S + –  
5-speed transmission:  
Press the gearshift lever to the right and to  
the back.  
6-speed transmission:  
Press the gearshift lever towards the left.  
Thereby overcome the slight resistance and  
press forward.  
Range selection  
Inadvertent engaging of certain selector  
lever positions is prevented by a lock.  
As you do this, the backup lamps will come  
on automatically when the ignition key is  
in position 2.  
Press the button on the front side of the  
selector lever knob. The lock is released.  
Do not hold the vehicle in place on  
slopes by slipping or 'riding' the  
clutch. Use the parking brake instead. Oth-  
erwise, a high degree of clutch wear could  
result.<  
While the vehicle is stationary, and  
before shifting out of P or N, press the  
brake pedal in order to disengage the selec-  
tor lever lock mechanism, shiftlock.  
If the engine speed is too high when the  
vehicle is at a standstill, the selector lever is  
also blocked to protect the transmission.  
Hold the brake pedal down until starting  
off. Otherwise the vehicle will 'creep' when  
a drive position is engaged.<  
To prevent the vehicle from starting  
off on its own, always move the  
54  
CONTINUOUSLY VARIABLE AUTOMATIC TRANSMISSION (CVT)*  
selector lever to position P and engage the  
parking brake before getting out of your  
vehicle with the engine running.  
Do not leave the vehicle unattended with  
the engine running. This is a safety haz-  
ard.<  
P Park  
Select only when the vehicle is completely  
stopped. The transmission locks to prevent  
the rear wheels from turning.  
R Reverse  
Select only when the vehicle is completely  
stopped.  
If the selector lever is not placed in  
position P when the vehicle is parked,  
the position display of the selector lever  
stays on. This can lead to battery dis-  
charge.<  
N Neutral Idle  
Engage this gear, for example, when you  
are in a car wash. The vehicle can roll.  
M/S + – Manual mode and Sport  
program  
D Drive: CVT driving position  
Switch from D into M/S + –:  
Activates the Sport program and displays  
SD in the gear indicator in the speedome-  
ter.  
This position is designed for driving under  
all normal operating conditions.  
Kickdown  
Press selector lever once:  
Kickdown can be used to achieve maxi-  
mum vehicle performance.  
Shifts from the Sport program to the man-  
ual mode.  
Press the accelerator pedal past the  
increased resistance point at the full-throt-  
tle position.  
Shifting with the selector lever  
>Press selector lever briefly towards +:  
Transmission shifts upwards  
>Press selector lever briefly towards –:  
Transmission shifts downwards.  
1 to 6 appear in the gear indicator.  
55  
CONTINUOUSLY VARIABLE AUTOMATIC TRANSMISSION (CVT)*  
In order to accelerate rapidly in the  
M/S + – Manual mode and in the  
Sport program, e.g. when passing, shift  
downwards manually or by kickdown.<  
Whenever you want to return to automatic  
shifting, just move the selector lever  
toward the left to position D.  
Switching from M/S + – Manual mode into  
the selector lever positions P, R and N is  
only possible via D.  
Shifting on the steering wheel*  
Available displays  
The shift paddles allow the gears to be  
changed rapidly and, above all, safely, since  
both hands can remain on the steering  
wheel.  
P R N D SD 1 2 3 4 5 6 EP  
Malfunction  
EP appears on the display. The transmission  
system is malfunctioning. Avoid high loads.  
All selector lever positions can still be  
engaged; in the forward driving positions,  
however, the vehicle can only be driven  
with a limited gear selection.  
Use one of the two shift paddles to shift  
upwards or downwards:  
>Pull shift paddle toward body:  
Transmission shifts upwards  
>Push shift paddle away from body:  
Transmission shifts downwards.  
Have the system checked immediately.  
Jump-starting and towing, refer to  
pages 134, 136.  
1 to 6 appear in the gear indicator.  
The transmission will only execute upshifts  
or downshifts that will result in a plausible  
combination of vehicle speed and engine  
rpm, e.g. downshifts that would result in  
excessive engine speed are not executed.  
56  

Related Topics

Popular Owner Manuals