SIGNAL/HEADLAMPFLASHER INSTRUMENT LIGHTING
FOG LAMPS
1 Turn signal indicators
When the parking lamps/low beams are
switched on:
Briefly press the switch upwards or down-
wards.
To control the instrument lighting, press
the button.
2 High beams/Headlamp flasher
To signal briefly
To increase the illumination intensity
Briefly press once again to switch off.
Gently push the lever up to the point of
resistance and hold it there, if necessary.
The lever returns to its center position once
it is released.
Keep the button pressed until the desired
brightness is reached.
Fog lamps*
The parking lamps or low beams
must be switched on. The green
indicator lamp lights up.
To decrease the illumination intensity
Press the button briefly.
With each brief pressing of the button, the
illumination intensity is reduced in steps.
The indicator lamp flashes and the
relay clicks faster than normal: a turn
signal indicator has failed.<
The fog lamps are switched on.
Rear fog lamp*
The low beams must be switched
on. The yellow indicator lamp
lights up. The rear fog lamp is
switched on.
Observe all legal regulations concerning
the use of fog lamps.
58
English 
