2001-2005 Mini Cooper 2 Door CONTROLS -> Transporting children safely User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Transporting children safely for Your Mini Cooper 2 Door First Generation (2001-2005)

VEHICLE MEMORY  
TRANSPORTING CHILDREN SAFELY  
>Setting units for outside temperature  
and fuel consumption display, refer to  
page 66  
>Setting units for display of temperatures  
specified for automatic climate control  
system, refer to page 80  
>Volume control PDC, refer to page 74  
>Acoustic alarm for starting PDC activa-  
tion, refer to page 74.  
restraint systems should be secured with  
the vehicle's safety belts.<  
The proper place for children  
Children should always sit in the rear:  
Accident research shows that the safest  
place for children in a vehicle is in the rear  
seat.  
Younger children should be secured in an  
appropriate forward-facing child-restraint  
system that has first been properly  
restrained. We strongly urge you to care-  
fully read and comply with the instructions  
for installation and use provided by the  
child-restraint's manufacturer whenever  
you use such a device.  
Older children should be tightly secured  
with a safety belt, after they have out-  
grown a booster seat that is appropriate for  
their age, height and weight.  
This symbol alerts you to Vehicle  
Memory functions in the Owner's  
Manual.<  
A child sitting in the rear seat and not  
properly restrained may place his or  
her head on or near the airbag, if so  
equipped. For example, a child – even  
though belted in – may fall asleep with his  
or her head against the side airbag. It may  
be difficult for a driver to ensure that chil-  
dren in the rear seat will remain properly  
positioned at all times and do not place  
their heads on or near the side airbag.  
Therefore, we recommend that the rear  
side airbags, if provided, be deactivated if  
you plan to transport children in the rear  
seat.<  
All rear seating positions in your vehicle  
meet the recommendations of SAE J1819,  
an industry-recommended practice for  
securing child-restraint systems in motor  
vehicles.  
After memory functions have been  
reconfigured, your vehicle may oper-  
ate slightly differently from the descrip-  
tions used in this Owner's Manual. If you  
decide to sell your vehicle one day, please  
remember to have the memory functions  
reset to their default configuration.<  
Exception for the front passenger seat  
Should it one day be necessary to use  
a child-restraint system on the front  
passenger seat, the airbags on the front  
passenger side must be deactivated. Other-  
wise, there is a significant risk of injury to  
children if the airbags deploy, even if they  
are seated in a child-restraint system. Have  
the front passenger airbags permanently  
deactivated only by your MINI Dealer or a  
workshop that has specially trained per-  
sonnel working in accordance with the  
specifications of the MINI manufacturer.<  
Child-restraint system in the rear  
Children under 13 years of age and  
children less than 5 ft / 150 cm tall  
should always ride in the rear and the  
48  
TRANSPORTING CHILDREN SAFELY  
Installing child-restraint systems  
To lock the belt  
Before installing any child-restraint system  
or child seat, read the following:  
Pull the entire length of the belt from the  
belt retractor. Allow the reel to retract the  
belt somewhat and engage the buckle,  
then tighten the belt against the child-  
restraint system.  
Always follow the manufacturer's  
instructions concerning installation  
and use; otherwise the system's protective  
function could be impaired. After an acci-  
dent, have all parts of the child-restraint  
system and the affected safety belt system  
inspected and/or replaced. Have the neces-  
sary work on your MINI carried out only by  
a MINI Dealer or a workshop that has spe-  
cially trained personnel working in accor-  
dance with the specifications of the MINI  
manufacturer.<  
The retraction mechanism is now locked.  
To unlock the belt  
Release the buckle, remove the child-  
restraint system and allow the belt retrac-  
tor to reel the belt completely in.  
Child seat security  
All of the rear belt retractors and the front  
passenger's safety belt can be locked for  
mounting and securing child-restraint sys-  
tems.  
Information regarding this is located near  
the buckle latch of each safety belt.  
Commercially available child-restraint sys-  
tems are designed to be secured with a lap  
belt or with the lap belt portion of a combi-  
nation lap/shoulder belt. Improperly or  
inadequately installed restraint systems  
can increase the risk of injury to children.  
Always read and follow the instructions  
that come with the system.  
49  
TRANSPORTING CHILDREN SAFELY  
Child-restraint system with tether  
strap  
LATCH child-restraint mounting  
system  
Both seating positions are fitted with a  
head restraint.  
As an example, the illustration shows the  
MINI COOPER and the MINI COOPER S.  
Open the cover.  
Lift the head restraint and pass the tether  
strap between the head restraint and the  
seat back. It is recommended to readjust  
the head restraint into the lowest possible  
position.  
The illustration is an example showing the  
mounts for the LATCH, Lower Anchors and  
Tethers for CHildren, child-restraint mount-  
ing system at the right rear.  
The system is also available at the left rear  
position.  
If you use a child-restraint system with a  
tether strap:  
Depending on the location selected for  
seating in the rear passenger area, attach  
the tether strap to the corresponding  
anchorage point to secure the child-  
restraint system.  
Adjust the tether strap according to the  
child-restraint manufacturer's instructions.  
The LATCH anchorage points are identified  
by buttons, see illustration.  
Always follow all manufacturer's  
instructions and observe all safety  
precautions when installing the LATCH  
child-restraint system.<  
50  

Related Topics

Popular Owner Manuals