GLASS SUNROOF, ELECTRIC*
ROLLER SUN BLIND*
Trap protection
If, while closing, the glass sunroof encoun-
ters resistance within roughly the last 8 in /
20 cm, the closing procedure is interrupted
and the roof reopens.
Despite the trap protection, be
extremely careful that the travel path
of the sunroof is not obstructed whenever
it is closed. Otherwise, it is not guaranteed
that the closing procedure will be inter-
rupted, for instance if the obstructions
offer very little resistance.
You can disable the trap protection by
pressing the switch past the pressure point
and holding it. When closing the sunroof
from the raised position, ensure that the
travel path of the sunroof is not obstructed
since the trap protection is not active in
this position.<
Manual opening and closing
1 Opening
In the event of an electrical malfunction,
you can also open and close the glass sun-
roof manually:
1. Press the button in the handle, arrow 1
The cap is unlocked
2. Guide the roller sun blind towards the
back.
1. Slide the cover panel towards the inte-
rior and remove it
2. Use an Allen key to turn the glass sun-
roof in the direction required.
2 Closing
1. Use the handle to pull the roller sun
blind forwards
2. Engage the handle in the device,
arrow 2.
Convenience operation
For convenience operation using the
remote control refer to page 26, for opera-
tion via the door lock refer to page 27.
34
English 
