2001-2005 Mini Cooper 2 Door OWNER SERVICE PROCEDURES -> Changing tires User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

OWNER SERVICE PROCEDURES -> Changing tires for Your Mini Cooper 2 Door First Generation (2001-2005)

SPACE-SAVER SPARE TIRE*  
CHANGING TIRES  
Additional safety measures in the  
event of a tire change:  
Change the tire only on a level, firm surface  
which is not slippery.  
Driving with the space-saver spare tire  
Drive cautiously. Do not exceed a speed of  
50 mph / 80 km/h.  
You must expect changes in vehicle han-  
dling such as lower track stability during  
braking, longer braking distances and  
changes in self-steering properties when  
close to the handling limit. These effects  
are more pronounced when driving with  
winter tires.  
The vehicle or the jack could slip sideways  
on soft or slippery support surfaces, such as  
snow, ice, flagstones, etc..  
Do not use a wooden block or similar object  
as a support base for the jack, as this would  
prevent it from extending to its full support  
height and reduce its load-carrying capac-  
ity.  
Only one space-saver spare tire may  
be mounted at one time. Reinstall a  
wheel and tire of the original size as soon  
as possible.<  
9. Pull out the space-saver spare tire  
towards the rear underneath the vehi-  
cle  
Do not lie under the vehicle or start the  
engine when the vehicle is supported by  
the jack – risk of fatal injury.<  
10. Position the space-saver spare tire with  
the valve facing upwards  
Preparing for a tire change  
Check the tire inflation pressure at  
the earliest opportunity and correct it  
if necessary. Replace the defective tire as  
soon as possible and have the new wheel/  
tire assembly balanced.<  
11. Unscrew the valve extension from the  
valve of the space-saver spare tire  
12. Unscrew the dust cap from the exten-  
sion and place it on the valve of the  
space-saver spare tire.  
Observe the safety precautions  
regarding flat tires on page 125.<  
1. For vehicles with a space-saver spare  
tire:  
Place the folding chock behind the front  
wheel on the other side of the vehicle;  
on downward inclines, place it in front of  
this wheel. If the wheel is changed on a  
surface with a more severe slope, take  
additional precautions to secure the  
vehicle from rolling  
Due to its different dimensions, the  
damaged wheel cannot be placed in  
the recess for the space-saver spare tire.<  
2. Loosen the lug bolts by a half turn.  
127  
CHANGING TIRES  
6. Tighten all the lug bolts firmly in a diag-  
onal pattern  
7. Lower the vehicle  
8. Remove the jack.  
Tightening the lug bolts  
Tighten the lug bolts in a diagonal pattern.  
As soon as possible, have the secure  
seating of the lug bolts, tightening  
torque 88.5 lb ft / 120 Nm, checked using a  
calibrated torque wrench. Otherwise, a  
wheel coming loose can lead to a severe  
accident.<  
Jacking up the vehicle  
2. During jacking up, insert the jack head in  
the square recess of the jacking point  
3. Jack the vehicle up until the wheel you  
are changing is raised from the ground.  
1. Place the jack at the jacking point closest  
to the wheel.  
The jack base must be perpendicular to  
the surface beneath the jacking point  
Replace the defective tire as soon as possi-  
ble and have the new wheel/tire assembly  
balanced.  
Mounting a wheel  
The vehicle jack is designed for  
changing wheels only. Do not  
1. Unscrew the lug bolts and remove the  
wheel  
attempt to raise another vehicle model  
with it or to raise any load of any kind. To  
do so could cause accidents and personal  
injury.<  
2. Remove accumulations of mud or dirt  
from the mounting surfaces of the  
wheel and hub. Clean the lug bolts  
3. Mount the new wheel  
4. Screw at least two lug bolts finger-tight  
into opposite bolt holes  
5. Screw in the remaining bolts  
128  

Related Topics

Popular Owner Manuals