REPAIRING A FLAT TIRE
SPACE-SAVER SPARE TIRE*
Safety measures in the event of a flat To change a space-saver spare tire, proceed
tire:
as follows:
Stop the vehicle as far as possible from
passing traffic. Switch on the hazard warn-
ing flashers.
Turn the steering wheel to the straight-
ahead wheel position and engage the
steering lock. Engage the parking brake and
shift into 1st or reverse gear – selector lever
in P.
All passengers should be outside the vehi-
cle and well away from your immediate
working area – behind a guardrail, for
instance.
>Remove space-saver spare tire, refer to
the section after the next one
>Prepare for tire change, refer to page 127
>Jack up the vehicle, refer to page 128
>Mount the space-saver spare tire, refer
to page 128
>Tighten the lug bolts, refer to page 128
>Drive with space-saver spare tire, refer to
page 127.
Tire change set
On vehicles with a space-saver spare tire,
the tire change set with onboard tools is
stored in the luggage compartment under
the floor mat.
If a portable hazard warning lamp is avail-
able, set it up on the roadside at an appro-
priate distance from the rear of the vehicle.
Comply with all safety guidelines and regu-
lations.<
1 Chock, folding
2 Hubcap remover
3 Wheel stud wrench
4 Jack
In the event of a flat tire, different proce-
dures should be followed depending on the
equipment included in your vehicle:
5 Special wrench for removing the space-
saver spare tire
>Vehicles with Run Flat tires, refer to
page 101
>Vehicles with a space-saver spare tire,
refer to the following section
>Vehicles with MINI Mobility System,
refer to page 129.
6 Towing eyelet
7 Lifting handle
The onboard tool kit includes a pouch with
a plastic bag in which you can place the
damaged wheel.
125
English 
