2001-2005 Mini Cooper 2 Door OWNER SERVICE PROCEDURES -> Space-saver spare tire User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

OWNER SERVICE PROCEDURES -> Space-saver spare tire for Your Mini Cooper 2 Door First Generation (2001-2005)

REPAIRING A FLAT TIRE  
SPACE-SAVER SPARE TIRE*  
Safety measures in the event of a flat To change a space-saver spare tire, proceed  
tire:  
as follows:  
Stop the vehicle as far as possible from  
passing traffic. Switch on the hazard warn-  
ing flashers.  
Turn the steering wheel to the straight-  
ahead wheel position and engage the  
steering lock. Engage the parking brake and  
shift into 1st or reverse gear – selector lever  
in P.  
All passengers should be outside the vehi-  
cle and well away from your immediate  
working area – behind a guardrail, for  
instance.  
>Remove space-saver spare tire, refer to  
the section after the next one  
>Prepare for tire change, refer to page 127  
>Jack up the vehicle, refer to page 128  
>Mount the space-saver spare tire, refer  
to page 128  
>Tighten the lug bolts, refer to page 128  
>Drive with space-saver spare tire, refer to  
page 127.  
Tire change set  
On vehicles with a space-saver spare tire,  
the tire change set with onboard tools is  
stored in the luggage compartment under  
the floor mat.  
If a portable hazard warning lamp is avail-  
able, set it up on the roadside at an appro-  
priate distance from the rear of the vehicle.  
Comply with all safety guidelines and regu-  
lations.<  
1 Chock, folding  
2 Hubcap remover  
3 Wheel stud wrench  
4 Jack  
In the event of a flat tire, different proce-  
dures should be followed depending on the  
equipment included in your vehicle:  
5 Special wrench for removing the space-  
saver spare tire  
>Vehicles with Run Flat tires, refer to  
page 101  
>Vehicles with a space-saver spare tire,  
refer to the following section  
>Vehicles with MINI Mobility System,  
refer to page 129.  
6 Towing eyelet  
7 Lifting handle  
The onboard tool kit includes a pouch with  
a plastic bag in which you can place the  
damaged wheel.  
125  
SPACE-SAVER SPARE TIRE*  
Removing the space-saver spare tire  
3. Screw the lifting handle from the  
onboard tool kit onto the thread  
4. Raise the lifting handle slightly  
5. Squeeze the securing spring  
6. The space-saver spare tire is released  
and must be held by the lifting handle  
7. Lower the space-saver spare tire with  
the lifting handle  
The screw connection of the space-saver  
spare tire is in the luggage compartment  
under the floor mat, on the base of the  
storage compartment for the tire change  
set.  
8. Unscrew the lifting handle  
1. Loosen the screw connection using the  
special wrench  
2. Take out the cover panel  
126  
SPACE-SAVER SPARE TIRE*  
CHANGING TIRES  
Additional safety measures in the  
event of a tire change:  
Change the tire only on a level, firm surface  
which is not slippery.  
Driving with the space-saver spare tire  
Drive cautiously. Do not exceed a speed of  
50 mph / 80 km/h.  
You must expect changes in vehicle han-  
dling such as lower track stability during  
braking, longer braking distances and  
changes in self-steering properties when  
close to the handling limit. These effects  
are more pronounced when driving with  
winter tires.  
The vehicle or the jack could slip sideways  
on soft or slippery support surfaces, such as  
snow, ice, flagstones, etc..  
Do not use a wooden block or similar object  
as a support base for the jack, as this would  
prevent it from extending to its full support  
height and reduce its load-carrying capac-  
ity.  
Only one space-saver spare tire may  
be mounted at one time. Reinstall a  
wheel and tire of the original size as soon  
as possible.<  
9. Pull out the space-saver spare tire  
towards the rear underneath the vehi-  
cle  
Do not lie under the vehicle or start the  
engine when the vehicle is supported by  
the jack – risk of fatal injury.<  
10. Position the space-saver spare tire with  
the valve facing upwards  
Preparing for a tire change  
Check the tire inflation pressure at  
the earliest opportunity and correct it  
if necessary. Replace the defective tire as  
soon as possible and have the new wheel/  
tire assembly balanced.<  
11. Unscrew the valve extension from the  
valve of the space-saver spare tire  
12. Unscrew the dust cap from the exten-  
sion and place it on the valve of the  
space-saver spare tire.  
Observe the safety precautions  
regarding flat tires on page 125.<  
1. For vehicles with a space-saver spare  
tire:  
Place the folding chock behind the front  
wheel on the other side of the vehicle;  
on downward inclines, place it in front of  
this wheel. If the wheel is changed on a  
surface with a more severe slope, take  
additional precautions to secure the  
vehicle from rolling  
Due to its different dimensions, the  
damaged wheel cannot be placed in  
the recess for the space-saver spare tire.<  
2. Loosen the lug bolts by a half turn.  
127  

Related Topics

Popular Owner Manuals