2014-2022 Mini One 2 Door CONTROLS -> Displays User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Displays for Your Mini One 2 Door Third Generation (2014-2022)

Displays
Vehicle features and op‐
tions
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your vehicle, e. g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be
observed.
Instrument cluster
Overview
1 Tachometer  85
2 Indicator/warning lights
3 Speedometer
4 Fuel gauge  85
5 Display/reset miles  85
6 Electronic displays  81
Seite 80
CONTROLS
Displays
80
Online Edition for Part no. 01 40 2 915 044 - X/16
Electronic displays
1 Driver assistance systems
Messages, for instance Check Control
Time  85
External temperature  85
Selection lists  89
Total miles/trip odometer  85
Onboard computer  89
2 Selector lever position  75
Gear shift indicator  87
3 MINI Driving Modes switch status  125
Status
Check Control
Concept
The Check Control system monitors functions in
the vehicle and notifies you of malfunctions in
the monitored systems.
General information
A Check Control message is displayed as a com‐
bination of indicator or warning lights and SMS
text messages in the instrument cluster and in
the Head-up Display.
In addition, an acoustic signal may be output
and a SMS text message may appear on the
Control Display.
Indicator/warning lights
General information
The indicator and warning lights can light up in
a variety of combinations and colors.
Several of the lights are checked for proper
functioning and light up temporarily when the
engine is started or the ignition is switched on.
Red lights
Safety belt reminder
Indicator lamp flashes or illuminates:
safety belt on the driver or front pas‐
senger side is not buckled. The safety
Seite 81
Displays
CONTROLS
81
Online Edition for Part no. 01 40 2 915 044 - X/16
belt reminder can also be activated if objects
are placed on the front passenger seat.
Make sure that the safety belts are positioned
correctly.
Airbag system
Airbag system and belt tensioner are
not working.
Have the vehicle checked immediately
by a dealer’s service center or another qualified
service center or repair shop.
Parking brake
The parking brake is set.
Release the parking brake, refer to
page 70.
Approach control warning
Indicator light illuminates: advance
warning is issued, for example when
there is the impending danger of a colli‐
sion or the distance to the vehicle ahead is too
small.
Increase distance.
Indicator light flashes: acute warning of the im‐
minent danger of a collision when the vehicle
approaches another vehicle at a relatively high
differential speed.
Intervention by braking or make an evasive
maneuver.
Pedestrian warning
If a collision with a person detected in
this way is imminent, the symbol lights
up and a signal sounds.
Orange lights
Active Cruise Control
The number bars shows the selected
distance from the vehicle driving ahead.
Camera-based cruise control, refer to
page 127.
Vehicle detection, Active Cruise Control
Indicator lamp illuminates: a vehicle has
been detected ahead of you.
Indicator lamp flashes: the conditions
are not adequate for the system to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator
pedal.
Yellow lights
Anti-lock Braking System ABS
Braking force boost may not be work‐
ing. Avoid abrupt braking. Take the lon‐
ger braking distance into account.
Have the system immediately checked
by a dealer’s service center or another
qualified service center or repair shop.
DSC Dynamic Stability Control
The indicator light flashes: DSC controls
the drive and braking forces. The vehi‐
cle is stabilized. Reduce speed and
adapt driving style to the driving circumstances.
The indicator light lights up: DSC has malfunc‐
tioned.
Have the system checked by a dealer’s service
center or another qualified service center or re‐
pair shop.
DSC Dynamic Stability Control, refer to
page
123.
Seite 82
CONTROLS
Displays
82
Online Edition for Part no. 01 40 2 915 044 - X/16
DSC Dynamic Stability Control is deactivated
or DTC Dynamic Traction Control is activated
DSC Dynamic Stability Control is deacti‐
vated or DTC Dynamic Traction Control
is activated.
DSC Dynamic Stability Control, refer to
page 123, and DTC Dynamic Traction Control,
refer to page 124.
Flat Tire Monitor FTM
The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Flat Tire Monitor, refer to page 113.
Tire Pressure Monitor TPM
The indicator light illuminates.
The Tire Pressure Monitor reports a low
tire inflation pressure or a flat tire.
Observe the information in the Check Control
message.
The indicator light flashes and then illuminates
continuously.
No flat tire or loss of tire inflation pressure can
be detected.
▷ Interference caused by systems or devices
with the same radio frequency: after leav‐
ing the area of the interference, the system
automatically becomes active again.
▷ TPM was unable to complete the reset. Re‐
set the system again.
▷ A wheel without TPM electronics is
mounted: have it checked by a dealer’s
service center or another qualified service
center or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire Pressure Monitor, refer to page 109.
Steering system
Steering system in some cases not
working.
Have the steering system checked by a
dealer’s service center or another qualified
service center or repair shop.
Emissions
▷ The warning light lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as pos‐
sible.
▷ The warning light flashes under certain cir‐
cumstances:
This indicates that there is excessive misfir‐
ing in the engine.
Reduce the vehicle speed and have the sys‐
tem checked immediately; otherwise, seri‐
ous engine misfiring within a brief period
can seriously damage emission control
components, in particular the catalytic con‐
verter.
Socket for Onboard Diagnosis, refer to
page 219.
Rear fog light
Rear fog lights are activated.
Rear fog lights, refer to page 103.
Green lights
Turn signal
Turn signal switched on.
Unusually rapid flashing of the indicator
light indicates that a turn signal bulb
has failed.
Turn signal, refer to page
70.
Seite 83
Displays
CONTROLS
83
Online Edition for Part no. 01 40 2 915 044 - X/16
Parking lights, headlight
Parking lights or headlights are acti‐
vated.
Parking lights/low beams, headlight
control, refer to page 100.
Front fog lights
Front fog lights are activated.
Front fog lights, refer to page 103.
High-beam Assistant
High-beam Assistant is switched on.
High beams are switched on and off au‐
tomatically depending on the traffic sit‐
uation.
High-beam Assistant, refer to page 102.
Cruise control
The system is switched on. It maintains
the speed that was set using the control
elements on the steering wheel.
Blue lights
High beams
High beams are activated.
High beams, refer to page 71.
Hiding Check Control messages
Press and hold button on signal lever.
Continuous display
Some Check Control messages are displayed
continuously and are not cleared until the mal‐
function is eliminated. If several malfunctions
occur at once, the messages are displayed con‐
secutively.
These messages can be hidden for approx.
8 seconds. After this time, they are displayed
again automatically.
Temporary display
Other Check Control messages are hidden au‐
tomatically after approx. 20 seconds. They are
stored and can be displayed again later.
Displaying stored Check Control
messages
Via the onboard monitor:
1. "Vehicle info"
2. "Vehicle status"
3. "Check Control"
4. Select the SMS text message.
Display
Check Control
At least one Check Control message is
displayed or is stored.
SMS text messages
SMS text messages in combination with a sym‐
bol in the instrument cluster explain a Check
Control message and the meaning of the indi‐
cator and warning lights.
Supplementary SMS text messages
Additional information, such as on the cause of
an error or the required action, can be called up
via Check Control.
With urgent messages the added text will be
automatically displayed on the Control Display.
Seite 84
CONTROLS
Displays
84
Online Edition for Part no. 01 40 2 915 044 - X/16
Symbols
Within the supplementary text, the following
functions can be selected independent of the
check control message.
▷ Display additional information about
the Check Control message in the Inte‐
grated Owner's Manual.
▷ "Service request"
Contact a dealer’s service center or another
qualified service center or repair shop.
▷ "Roadside Assistance"
Contact Roadside Assistance.
Messages after trip completion
Special messages displayed while driving are
displayed again after the ignition is switched
off.
Fuel gauge
Vehicle tilt position may cause
the display to vary.
The arrow beside the fuel pump
symbol shows which side of the
vehicle the fuel filler flap is on.
Notes on refueling, refer to page 186.
When the reserve fuel level is reached,
the yellow indicator lamp is illuminated.
Tachometer
Always avoid engine speeds in the red warning
field. In this range, the fuel supply is reduced to
protect the engine.
Odometer and trip odom‐
eter
Concept
The total number of kilometers driven and the
number of kilometers driven since the last reset
are displayed in the instrument cluster.
Reset the trip odometer
Press the knob.
▷ The odometer is displayed
when the ignition is switched
off.
▷ When the ignition is switched
on, the trip odometer is re‐
set.
External temperature
WARNING
Even at temperatures above +37 ℉/+3 ℃
there can be a risk of icy roads, e.g., on bridges
or shady sections of road. There is a risk of an
accident. Adjust your driving style to the
weather conditions at low temperatures.◀
If the indicator drops to
+37 ℉/+3 ℃, a signal sounds.
A Check Control message is dis‐
played.
There is an increased risk of ice
on roads.
Time
The time is displayed in the in‐
strument cluster.
The time can be set via the on‐
board monitor.
Seite 85
Displays
CONTROLS
85
Online Edition for Part no. 01 40 2 915 044 - X/16
Date
The date is displayed in the in‐
strument cluster.
The date can be set via the on‐
board monitor.
Range
Display
With a low remaining range:
▷ A Check Control message is
displayed briefly.
▷ The remaining range is
shown on the onboard com‐
puter.
▷ With a dynamic driving style, for example
taking curves aggressively, the engine func‐
tion is not always ensured.
The Check Control message appears continu‐
ously below a range of approx. 30 miles/50 km.
NOTE
With a range of less than 30 miles/50 km
it is possible that the engine will no longer have
sufficient fuel. Engine functions are not ensured
anymore. There is a risk of property damage.
Refuel promptly.◀
Displaying the cruising range
Via the onboard monitor:
1. "Settings"
2. "Instrument cluster"
3. "Range"
Current fuel consump‐
tion
The concept
Displays the current fuel consumption. Check
whether you are currently driving in an efficient
and environmentally-friendly manner.
Displaying the current fuel
consumption
Via the onboard monitor:
1. "Settings"
2. "Instrument cluster"
3. "Current consumption"
Service requirements
Concept
The function displays the necessary service re‐
quirements and the corresponding mainte‐
nance procedures.
General information
After the ignition is turned on the instrument
cluster briefly displays available driving distance
or time to the next scheduled maintenance.
A service advisor can read out the current serv‐
ice requirements from your remote control.
Display
Detailed information on service
requirements
More information on the scope of service re‐
quired can be displayed on the Control Display.
Via the onboard monitor:
1. "Vehicle info"
2. "Vehicle status"
3. "Service required"
Seite 86
CONTROLS
Displays
86
Online Edition for Part no. 01 40 2 915 044 - X/16
Required maintenance procedures and le‐
gally mandated inspections are displayed.
4. Select an entry to call up detailed informa‐
tion.
Symbols
Symbols Description
No service is currently required.
The deadline for scheduled
maintenance or a legally man‐
dated inspection is approach‐
ing.
The service deadline has al‐
ready passed.
Entering appointment dates
Enter the dates for the mandatory vehicle in‐
spections.
Make sure that the vehicle's date and time are
set correctly.
Via the onboard monitor:
1. "Vehicle info"
2. "Vehicle status"
3. "Service required"
4. "§ Vehicle inspection"
5. "Date:"
6. Adjust the settings.
7. Confirm.
The entered date is stored.
Gear shift indicator
The concept
The system recommends the most fuel efficient
gear for the current driving situation.
General information
Depending on the vehicle's features and coun‐
try-specific version, the gear shift indicator is
active in the manual mode of the Steptronic
transmission and with manual transmission.
Suggestions to shift gear up or down are dis‐
played in the instrument cluster.
Manual transmission: displaying
Example Description
Fuel efficient gear is set.
Shift into fuel efficient gear.
Steptronic transmission: displaying
Example Description
Fuel efficient gear is set.
Shift into fuel efficient gear.
Speed Limit Info
Speed Limit Info
Concept
Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
General information
The camera at the base of the interior mirror
detects traffic signs at the edge of the road as
well as variable overhead sign posts. Traffic
signs with extra symbols for wet road condi‐
tions, etc., are also detected and compared
with the vehicle's onboard data, such as from
Seite 87
Displays
CONTROLS
87
Online Edition for Part no. 01 40 2 915 044 - X/16
the rain sensor, and will be displayed depend‐
ing on the situation.
With the navigation system, the system takes
into account the information stored in the navi‐
gation data and also displays speed limits pres‐
ent on routes without signs.
Without a navigation system, the system is sub‐
ject to limitations imposed by technology. Traf‐
fic signs with speed limitations are detected
and displayed only. Speed limitations due to
entering or exiting towns, highway signs, etc.
are not displayed. Speed limits with extra text
characters are always displayed.
Safety information
WARNING
The system does not release from the
personal responsibility to correctly assess visi‐
bility and traffic situation. There is a risk of an
accident. Adjust the driving style to the traffic
conditions. Watch traffic closely and actively in‐
tervene in the respective situations.◀
Overview
Camera
The camera is installed near the interior mirror.
Keep the windshield in the area behind the in‐
terior mirror clean and clear.
Display
Speed limit detection is displayed via the on‐
board computer.
Press button on the turn signal lever several
times, if needed.
Speed limit detection is displayed on the CID
(central information display) in the instrument
cluster.
Speed Limit Info
The last speed limit detected.
Without a navigation system the
traffic signals are grayed out af‐
ter curves or longer stretches of
roadway.
With navigation system: speed
limit detection is not available.
Without navigation system: no
speed limit or cancellation is de‐
tected.
Speed Limit Info can also be displayed in the
Head-up Display.
System limits
The system may not be fully functional and
may provide incorrect information in the fol‐
lowing situations:
▷ In heavy fog, rain or snowfall.
▷ When signs are fully or partially concealed
by objects, stickers or paint.
Seite 88
CONTROLS
Displays
88
Online Edition for Part no. 01 40 2 915 044 - X/16
▷ When driving very close to the vehicle in
front of you.
▷ When driving toward bright lights or strong
reflections.
▷ When the windshield behind the interior
mirror is fogged over, dirty or covered by a
sticker, etc.
▷ In the event of incorrect detection by the
camera.
▷ If the speed limits stored in the navigation
system are incorrect.
▷ In areas not covered by the navigation sys‐
tem.
▷ When roads differ from the navigation, such
as due to changes in road routing.
▷ When passing buses or trucks with a speed
sticker.
▷ If the traffic signs are non-conforming.
▷ During calibration of the camera immedi‐
ately after vehicle delivery.
▷ When signs are detected valid for a parallel
road.
Selection lists
General information
With the buttons on the steering wheel and the
display in the instrument cluster the following
can be displayed or operated:
▷ Current audio source.
▷ Redial phone feature.
▷ Turn on voice activation system.
Activating a list and adjusting the
setting
Button the steering wheel Function
Activate the respec‐
tive list and select the
desired settings.
Confirm the selection.
Display
Onboard computer
Concept
The onboard computer displays different vehi‐
cle data in the instrument cluster, such as aver‐
age values.
Calling up information on the info
display
Press and hold button on blinker lever.
Seite 89
Displays
CONTROLS
89
Online Edition for Part no. 01 40 2 915 044 - X/16
Information is displayed in the info display of
the instrument cluster.
Information at a glance
CID (central information display)
Repeatedly pressing the button
on the turn signal lever calls up
the following information in the
CID (central information display):
▷ Range.
▷ GREEN Info.
When GREEN Mode is activated.
▷ Average fuel consumption.
▷ Current fuel consumption.
▷ Average speed.
▷ Date.
▷ Engine temperature display.
▷ With equipment version with Head-up Dis‐
play and navigation:
Distance to destination.
When destination guidance is activated in
the navigation system.
▷ With equipment version with Head-up Dis‐
play and navigation:
Time of arrival.
When destination guidance is activated in
the navigation system.
▷ Speed Limit Info.
▷ Speed.
The unit of some information can be changed.
Setting units, refer to page 93.
Selecting information
You can select what information from the on‐
board computer is to be displayed on the CID
(central information display) of the instrument
cluster.
Via the onboard monitor:
1. "Settings"
2. "Instrument cluster"
3. Select the desired information.
Settings are stored for the profile currently
used.
Information in detail
Range
Displays the estimated cruising range available
with the remaining fuel.
It is calculated based on your driving style over
the last 20 miles/30 km.
GREEN info
The achieved range extension may be dis‐
played as a bonus range.
Average fuel consumption
This is calculated for the period while the en‐
gine is running.
The average fuel consumption is calculated for
the distance traveled since the last reset by the
onboard computer.
Average speed
Periods in which the vehicle is parked with the
engine manually stopped are not included in
the calculation of the average speed.
Resetting average values
Press and hold button on turn signal lever.
Seite 90
CONTROLS
Displays
90
Online Edition for Part no. 01 40 2 915 044 - X/16
Engine temperature display
Displays the current engine temperature, based
on a combination of coolant and engine oil
temperature. As soon as the optimum operat‐
ing temperature has been attained, the indica‐
tor is in the center position.
If the engine oil or coolant, thus the engine, be‐
come too hot, a Check Control message is dis‐
played.
When the engine temperature is too
high, a red indicator lamp is displayed.
When the engine oil temperature is too
high, a red indicator lamp is displayed.
Check the coolant level, refer to page
216.
With equipment version with Head-up
Display and navigation: distance to
destination
The distance remaining to the destination is
displayed if a destination is entered in the navi‐
gation system before the trip is started.
The distance to the destination is adopted au‐
tomatically.
With equipment version with Head-up
Display and navigation: time of arrival
The estimated time of arrival is displayed if a
destination is entered in the navigation system
before the trip is started.
The time must be correctly set.
Speed Limit Info
Further information, see chapter Speed Limit
Info.
Onboard computer on the Control
Display
Concept
The onboard computer displays different vehi‐
cle data on the Control Display, such as average
values.
General information
The vehicle features two types of onboard
computers.
▷ "Onboard info": average values, such as the
fuel consumption, are displayed. The values
can be reset individually.
▷ "Trip computer": the values deliver an over‐
view of a certain distance and can be reset
as often as necessary.
Calling up the onboard computer or trip
computer
Via the onboard monitor:
1. "Vehicle info"
2. "Onboard info" or "Trip computer"
Resetting the onboard computer
Via the onboard monitor:
1. "Vehicle info"
2. "Onboard info"
3. "Consumpt." or "Speed"
4. "Yes"
Resetting the trip computer
Via the onboard monitor:
1. "Vehicle info"
2. "Trip computer"
3. "Reset": all values are reset.
"Automatically reset": all values are reset
approx. 4 hours after the vehicle has come
to a standstill.
Driving Excitement
The concept
On the Control Display, sport instruments can
be displayed, and the vehicle condition can be
checked before the use of the SPORT program.
Seite 91
Displays
CONTROLS
91
Online Edition for Part no. 01 40 2 915 044 - X/16
Sport instruments
On the Control Display, values for power and
torque are displayed.
Displaying sport instruments
Via the onboard monitor:
1. "Vehicle info"
2. "Driving Excitement"
3. "Sports instruments"
Via MINI Driving Modes switch:
1. Activate SPORT.
2. "Driving Excitement"
3. "Sports instruments"
Vehicle state
The following vehicle and surrounding area
data is automatically checked and evaluated in
succession:
▷ Range.
▷ Engine temperature.
▷ External temperature.
▷ SPORT program state.
Finally, a total evaluation of the vehicle state is
displayed.
Checking vehicle state
Via the onboard monitor:
1. "Vehicle info"
2. "Driving Excitement"
3. "Vehicle and surroundings"
Via MINI Driving Modes switch:
1. Activate SPORT.
2. "Driving Excitement"
3. "Vehicle and surroundings"
Speed warning
Concept
A speed limit can be set that when reached will
cause a warning to be issued.
General information
The warning is repeated if the vehicle speed
drops below the set speed limit once by at least
3 mph/5 km/h.
Displaying, setting or changing the
speed warning
Via the onboard monitor:
1. "Settings"
2. "Speed"
3. "Warning at:"
4. Turn the controller until the desired speed
warning is displayed.
5. Press the controller.
Activating/deactivating the speed
warning
Via the onboard monitor:
1. "Settings"
2. "Speed"
3. "Warning"
4. Press the controller.
Setting your current speed as the speed
warning
Via the onboard monitor:
1. "Settings"
2. "Speed"
3. "Select current speed"
4. Press the controller.
Seite 92
CONTROLS
Displays
92
Online Edition for Part no. 01 40 2 915 044 - X/16
Settings on the Control
Display
Time
Setting the time zone
1. "Settings"
2. "Time/Date"
3. "Time zone:"
4. Select the desired time zone.
The time zone is stored.
Setting the time
1. "Settings"
2. "Time/Date"
3. "Time:"
4. Turn the Controller until the desired hours
are displayed.
5. Press the Controller.
6. Turn the Controller until the desired mi‐
nutes are displayed.
7. Press the Controller.
The time is stored.
Setting the time format
1. "Settings"
2. "Time/Date"
3. "Format:"
4. Select the desired format.
The time format is stored.
Date
Setting the date
1. "Settings"
2. "Time/Date"
3. "Date:"
4. Turn the Controller until the desired day is
displayed.
5. Press the Controller.
6. Make the necessary settings for the month
and year.
The date is stored.
Setting the date format
1. "Settings"
2. "Time/Date"
3. "Format:"
4. Select the desired format.
The date format is stored.
Language
Setting the language
1. "Settings"
2. "Language/Units"
3. "Language:"
4. Select the desired language.
Settings are stored for the profile currently
used.
Setting the voice dialog
Voice dialog for the voice activation system, re‐
fer to page 27.
Units of measurement
Setting the units of measurement
To set the units for fuel consumption, route/
distance and temperature:
1. "Settings"
2. "Language/Units"
3. Select the desired menu item.
4. Select the desired unit.
Settings are stored for the profile currently
used.
Seite 93
Displays
CONTROLS
93
Online Edition for Part no. 01 40 2 915 044 - X/16
Brightness.
Setting the brightness
To set the brightness of the Control Display:
1. "Settings"
2. "Control display"
3. "Brightness"
4. Turn the Controller until the desired bright‐
ness is set.
5. Press the Controller.
Settings are stored for the profile currently
used.
Depending on the light conditions, the bright‐
ness settings may not be clearly visible.
LED ring on the central
instrument cluster
The concept
The LED ring displays light animations to repre‐
sent specific functions.
Basic displays
Basic functions, for example the tachometer,
can be set to be displayed continually if so de‐
sired.
Event displays
Functions that are only displayed temporarily,
for example the volume or temperature set‐
tings, can be set as event displays.
Several vehicle assistance functions can also be
displayed on the LED ring. This display corre‐
sponds with the displays of the function in the
respective display.
Example: tachometer
Like the tachometer in the instrument cluster,
the light animations of the tachometer's basic
display show the current RPMs and the respec‐
tive RPM warning margins.
Display
▷ Arrow 1: current RPM.
▷ Arrow 2: prewarning field.
▷ Arrow 3: warning field.
Switching on/off LED ring
Via the onboard monitor:
1. "Settings"
2. "Center Instrument"
3. "Center Instrument"
Adjusting the LED ring
Via the onboard monitor:
1. "Settings"
2. "Center Instrument"
3. "Basic display" or "Event display"
4. Select the desired setting.
Setting the brightness
The brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the onboard monitor:
1. "Settings"
2. "Center Instrument"
3. "Brightness"
4. Turn the controller.
Settings are stored for the profile currently
used.
Seite 94
CONTROLS
Displays
94
Online Edition for Part no. 01 40 2 915 044 - X/16
Head-up Display
Concept
This system projects important information into
the driver's field of vision, for instance the
speed.
The driver can get information without averting
his or her eyes from the road.
General information
Follow the instructions for cleaning the Head-
up Display. For additional information, see the
chapter on care.
Safety information
WARNING
When extending and retracting the pro‐
jection screen of the Head-up Display, body
parts can be jammed. There is a risk of injury.
Make sure that the area of movement of the
projection screen is clear during opening and
closing.◀
NOTE
The Head-up Display consists of sensitive
components that can easily be scraped or dam‐
aged. There is a risk of property damage. Do
not place any objects on the Head-up Display,
attach to system components or plug into the
system. Do not move the moving parts man‐
ually.◀
Overview
Switching on/off
When switching on, the projection lens of the
Head-up Display is extended. When switching
off, the projection lens of the Head-up Display
is retracted again.
Press button.
Display
Overview
The following information is displayed on the
Head-up Display:
▷ Speed.
▷ Navigation system.
▷ Check Control messages.
▷ Selection list from the instrument cluster.
▷ Driver assistance systems.
Some of this information is only displayed
briefly as needed.
Selecting displays in the Head-up
Display
Via the onboard monitor:
1. "Settings"
2. "Head-Up Display"
3. "Displayed information"
4. Select the desired displays in the Head-up
Display.
Settings are stored for the profile currently
used.
Seite 95
Displays
CONTROLS
95
Online Edition for Part no. 01 40 2 915 044 - X/16
Setting the brightness
The brightness is automatically adjusted to the
ambient brightness.
The basic setting can be adjusted.
Via the onboard monitor:
1. "Settings"
2. "Head-Up Display"
3. "Brightness"
4. Turn the controller until the desired bright‐
ness is set.
5. Press the controller.
When the low beams are activated, the bright‐
ness of the Head-up Display can be additionally
influenced using the instrument lighting, refer
to page 104.
Settings are stored for the profile currently
used.
Adjusting the height
Via the onboard monitor:
1. "Settings"
2. "Head-Up Display"
3. "Height"
4. Turn the controller until the desired height
is reached.
5. Press the controller.
Settings are stored for the profile currently
used.
Setting the rotation
The screen of the Head-up Display can be ro‐
tated around its own axis.
Via the onboard monitor:
1. "Settings"
2. "Head-Up Display"
3. "Rotation"
4. Turn the controller until the desired setting
is selected.
5. Press the controller.
Settings are stored for the profile currently
used.
Display visibility
The visibility of the displays in the Head-up Dis‐
play is influenced by the following factors:
▷ Certain sitting positions.
▷ Objects on the cover of the Head-up Dis‐
play.
▷ Sunglasses with certain polarization filters.
▷ Wet roads.
▷ Unfavorable light conditions.
John Cooper Works: sport displays in
the Head-up Display
General information
The sport displays in the Head-up Display assist
with a sporty driving style.
Switching on
Via the onboard monitor:
1. "Settings"
2. "Head-Up Display"
3. "Displayed information"
4. "Sport displays"
With navigation system: if the sport displays are
switched on, no navigation content will be dis‐
played on the Head-up Display.
Seite 96
CONTROLS
Displays
96
Online Edition for Part no. 01 40 2 915 044 - X/16
Display
1 Speed
2 Shift point indicator
3 Gear display
4 Current engine speed
5 Warning field, speed
Shift point indicator
Concept
Shift point indicator in the Head-up Display in‐
dicates the optimum shifting point. Thus, with a
sporty driving style, the best possible vehicle
acceleration is achieved.
Functional requirements
▷ Steptronic transmission:
Manual mode M/S and, if necessary, Dy‐
namic Traction Control DTC are activated.
▷ Press the accelerator pedal all the way
down.
Switching on
Shift point indicators are displayed in the Head-
up Display if the sport displays, refer to
page 96, are switched on.
Via the onboard monitor:
1. "Settings"
2. "Head-Up Display"
3. "Displayed information"
4. "Sport displays"
Display
Successive gray illuminated fields indicate the
upcoming shift moment.
Shift up immediately when the red fields light
up.
When the permitted maximum speed is
reached, all shift point indicators flash.
When the maximum speed is exceeded, the
supply of fuel is interrupted in order to protect
the engine.
Chrono package in the
cockpit
Concept
The Chrono package consists of three display
instruments in the cockpit, where the engine oil
pressure, the turbocharger boost, and the time
are displayed. In addition, intermediate and to‐
tal times can be measured using a stop watch.
The display elements of the Chrono package
mainly support a sporty driving style, e,g, on
racetracks.
Overview
1 Engine oil pressure display
2 Display of turbocharger boost
3 Time/stop watch
Seite 97
Displays
CONTROLS
97
Online Edition for Part no. 01 40 2 915 044 - X/16
Engine oil pressure
The current engine oil pressure is displayed. At
low temperatures, there can be an increase in
the engine oil pressure.
Turbocharger boost
The current boost of the engine's turbocharger
is displayed.
Stop watch
General information
The stop watch contains the following features:
▷ Measuring the total time.
▷ Measuring and storing of up to nine lap
times.
▷ Displaying the time.
The red indicator light indicates that the
stop watch is active.
Overview, buttons
▷ MODE button, arrow 1.
▷ START/STOP button, arrow 2.
▷ RESET/LAP buttons, arrow 3.
Displaying the measured times
The times measured using the stop watch are
shown in minutes and seconds on the display.
For times greater than 60 minutes, the num‐
bers of hours and the minutes with seconds are
alternatively displayed.
If the stop watch is running, the seconds are
also shown using a seconds pointer in the scale
of the display element.
Measuring the total time
1. Press button, arrow 2, to start the stop
watch.
2. Press button, arrow 2, again to stop the
stop watch.
Lap times
General information
It is possible to measure and store up to nine
lap times. Older lap times are overwritten.
Measuring and storing a lap time
1. Press button, arrow 2, to start the stop
watch.
2. Press button, arrow 3, to measure and store
a lap time.
The lap time is briefly shown in the display
and via the seconds pointer of the stop
watch, for example, LAP 1 with the meas‐
ured time. The stop watch continues run‐
ning in the background.
3. If needed, press button, arrow 3, again to
measure a further lap time.
Calling up lap times
1. Press button, arrow 1, repeatedly until
LAP 1 is shown on the display.
2. Press button, arrow 2, to call up the individ‐
ual lap times.
Deleting lap times
1. Press button, arrow 1, repeatedly until
LAP 1 is shown on the display.
2. Press button, arrow 3, to delete all stored
lap times.
Displaying the time
The time is copied from the instrument cluster.
Seite 98
CONTROLS
Displays
98
Online Edition for Part no. 01 40 2 915 044 - X/16
Press button, arrow 1, repeatedly until the time
is displayed.
Seite 99
Displays
CONTROLS
99
Online Edition for Part no. 01 40 2 915 044 - X/16

Related Topics

CONTROLS
Opening and closing Settings Transporting children safely Driving Lights Safety Driving stability control systems Driving comfort Climate control Interior equipment Storage compartments Cargo area

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot