Get Display screen, heater, air conditioner, audio and phone systems -> Climate control system Guide for Nissan Leaf 4 Door First Generation (2010-2017)

CLIMATE CONTROL SYSTEM

WARNING

Note

• Odors from inside and outside the vehicle

can build up in the air conditioner unit.

Odor can enter the passenger compart-

ment through the vents.

•

The air conditioning cooling function

operates only when the power switch

is in the ON position or when the

READY to drive indicator light is ON.

Do not leave children or adults who

would normally require the support of

others alone in your vehicle. Pets

should not be left alone either. On hot,

sunny days, temperatures in a closed

vehicle could quickly become high

enough to cause severe or possibly

fatal injuries to people or animals.

Do not use the recirculation mode for

long periods as it may cause the inte-

rior air to become stale and the win-

dows to fog up.

• When parking, set the heater and air con-

ditioner controls to turn off air recircula-

tion to allow fresh air into the passenger

compartment. This should help reduce

odors inside the vehicle.

•

The climate control system (air conditioner and

heater functions) can be operated when the

READY to drive indicator light is illuminated.

However, while charging, the climate control sys-

tem can be used when the power switch is in the

ON position.

•

Passenger side

The fan, heater and air conditioning can be turned

on manually, using the timer function and using

the remote climate control function.

Display screen, heater, air conditioner, audio and phone systems 4-9

These functions operate in the following condi-

tions.

Power switch position

Fan

LOCK/OFF

ACC

ON

READY to drive

-

Available

Heater and air conditioner

Timer (Climate Ctrl. Timer)

Remote control*3

-

Available*2

Available

Available*1

Available

Available*1

Available

-

*1: The EVSE (Electric Vehicle Supply Equip-

ment) must be connected.

*2: The climate control system will only start

when charging is being performed. After

charging is complete, it will continue to op-

erate if the EVSE (Electric Vehicle Supply

Equipment) is connected.

*3: Models with Navigation System.

4-10 Display screen, heater, air conditioner, audio and phone systems

– If it occurs while charging is being per-

formed:

NOTE:

• If the READY to drive indicator light is

illuminated and the EVSE (Electric Vehicle

Supply Equipment) is connected to the

vehicle, the power switch will change to

the ON position. At the same time, the

climate control system will stop operat-

ing. However, the fan will continue to op-

erate. If you want to turn on climate con-

trol again, place the power switch in the

OFF position and then place it in the ON

position again after confirming that the

vehicle has started charging.

– The climate control system will stop

once. If the power supply is restored

within approximately 5 minutes, the

climate control system will restart.

However, if more than 5 minutes

have elapsed, the climate control

system will not restart.

– If it occurs after charging has finished:

– The climate control system will stop.

DISPLAYING CLIMATE CONTROL SYSTEM

STATUS SCREEN (MODELS WITH NAVIGA-

TION SYSTEM)

• When the power switch is in the ON posi-

tion, if the power supply from the EVSE

(Electric Vehicle Supply Equipment) is in-

terrupted due to an electrical outage, etc.,

the system will operate in the following

ways.

Push the STATUS button to display the climate

control system status on the navigation system

screen. (See the LEAF Navigation System Own-

er’s Manual.)

Display screen, heater, air conditioner, audio and phone systems 4-11

8. A/C (air conditioner) ON·OFF button

9. MODE (manual air flow control) button

10. HEAT button

11. A/C-Heater ON·OFF button

Automatic operation (AUTO)

The AUTO mode may be used year-round as the

system automatically controls constant tempera-

ture, air flow distribution and fan speed.

To turn off the climate control, press the A/C-

Heater ON·OFF button.

The same operating mode (Heater or A/C) that

was active when the system is turned off is active

when system is turned back on.

While operating the climate control in the AUTO

mode, selecting any other climate control button

de-activates the AUTO mode and activates

manual mode.

Cooling and/or dehumidified heating:

The dehumidified heating mode can be used to

keep the windows from fogging. In this mode, the

heat pump compressor is used in A/C mode for

dehumidifying the air instead of heating it. The

PTC heater is also used in conjunction to heat the

air. This mode will increase energy consumption

and therefore reduce range.

4. Climate Ctrl. display

5. (rear window defroster) button (See

AUTOMATIC CLIMATE CONTROL

(MODELS WITHOUT NAVIGATION

SYSTEM)

“Rear window and outside mirror defroster

switch” in the “Instruments and controls”

section.)

1.

2.

3.

(fan speed control) dial

(intake air control) button

(front defroster) button

6. Temperature control dial

7. AUTO climate control ON button

4-12 Display screen, heater, air conditioner, audio and phone systems

1. Press the AUTO button. The AUTO indicator

will illuminate.

3. If the A/C indicator light illuminates, press the

A/C button. The A/C indicator light will turn

off.

• When the front defroster

button is

pressed, the air conditioner will automatically

turn on to defog the windshield. The outside

air circulation mode will be selected to im-

prove the defogging performance.

2. If the A/C indicator light does not illuminate,

press the A/C button. The A/C indicator light

will illuminate.

4. Turn the temperature control dial to set the

desired temperature. The temperature range

is between 60°F (16°C) and 90°F (32°C).

3. If the HEAT indicator light does not illuminate,

press the HEAT button. The HEAT indicator

light will illuminate.

Manual operation

• Do not set the temperature lower than the

outside air temperature. Doing so may pre-

vent the temperature from being controlled

properly.

The manual mode can be used to control the

heater and air conditioner to your desired set-

tings.

4. Turn the temperature control dial to set the

desired temperature. The temperature range

is between 60°F (18°C) and 90°F (32°C).

To turn off the heater and air conditioner, press

the A/C-Heater ON·OFF button.

• If the windows fog up, use dehumidified

heating instead of the A/C off heating.

5. To set the automatic control mode, press and

Fan speed control:

hold the

(intake air control) button. The

Dehumidified defrosting/defogging:

indicator will blink twice and inside/outside

circulation will switch automatically.

Turn the fan speed control dial

to increase the fan speed.

clockwise

counter-

1. Press the front defroster

indicator light will illuminate.)

button. (The

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a malfunc-

tion.

Turn the fan speed control dial

clockwise to decrease the fan speed.

2. Turn the temperature control dial to set the

desired temperature.

• To remove moisture or fog on the front win-

dow quickly, set the temperature to the high

temperature and the fan speed to their maxi-

mum level.

Press the AUTO button to change the fan speed

to the automatic mode.

Heating (A/C off):

1. Press the AUTO button. The AUTO indicator

will illuminate.

• After the windshield is cleared, press the

front defroster

cator light will turn off.)

button again. (The indi-

2. Press the HEAT button. The indicator light on

the HEAT button will come on. If the indicator

light on the A/C button remains on, press the

A/C button so that the indicator light turns off.

Display screen, heater, air conditioner, audio and phone systems 4-13

Air flow control:

Note

The ventilation mode requires a lower

power consumption, so cruising distance

will increase.

• Odors from inside and outside the vehicle

can build up in the air conditioner unit.

Odor can enter the passenger compart-

ment through the vents.

Press the MODE button to change the air flow

mode.

— Air flows from the center and side

ventilators.

Air recirculation:

• When parking, set the heater and air con-

ditioner controls to turn off air recircula-

tion to allow fresh air into the passenger

compartment. This should help reduce

odors inside the vehicle.

— Air flows from the center and side

ventilators and foot outlets.

Press the intake air control

button to

change the air circulation mode. When the indi-

cator light illuminates, the flowing air is recircu-

lated inside the vehicle.

— Air flows mainly from the foot

outlets.

— Air flows from the defroster outlets

and foot outlets.

Outside air circulation:

Climate Ctrl. Timer

Press the intake air control

button to

The air conditioner starts to operate at the time of

day and day of the week specified in the settings.

This pre heats or pre cools the vehicle to a factory

preset temperature in the passenger compart-

ment before driving while the charger is con-

nected to vehicle. This helps reduce power con-

sumption from the Li-ion battery.

Temperature control:

change the air circulation mode. When the indi-

cator light does not illuminate, the flowing air is

drawn from outside the vehicle.

Turn the temperature control dial to set the de-

sired temperature.

Automatic air intake control:

The temperature range is between 60°F (16°C)

and 90°F (32°C).

To set the automatic control mode, press and

hold the

(intake air control) button. The

Ventilation:

indicator light will blink twice and the inside/

outside circulation will then be controlled auto-

matically. When in automatic mode, the indicator

light will come on when inside air recirculation is

active.

As the temperature is set to the factory default

setting, the user cannot adjust the temperature.

1. Press the AUTO button so that the indicator

light turns off.

The Climate Ctrl. Timer operates the air condi-

tioner using power from the charger. Electric

power from the Li-ion battery is not used.

2. Press the HEAT button and A/C button if the

indicator lights are on so that both indicator

lights turn off.

Once the Climate Ctrl. Timer is set, it automati-

cally starts when the set time is reached. It is

4-14 Display screen, heater, air conditioner, audio and phone systems

therefore not necessary to set the Climate Ctrl.

Timer everyday.

WARNING

Even if the Climate Ctrl. Timer is set, the

temperature in the passenger compart-

ment may become high or low if the sys-

tem automatically stops. Do not leave

children or adults who would normally

require the support of others alone in

your vehicle. Pets should not be left

alone either. On hot, sunny days, tem-

peratures in

a

closed vehicle could

quickly become high enough to cause

severe or possibly fatal injuries to people

or animals. Also on cold days, tempera-

A

1. Push the

switch

on the left side of

᭺

ture in

a

vehicle could become low

the combination meter panel.

enough to cause severe or possible fatal

injuries to people or animals.

B

2. Push the

switch

until “Climate Ctrl.

᭺

Timer” is highlighted on the vehicle informa-

tion display and then push the switch.

Display screen, heater, air conditioner, audio and phone systems 4-15

3. The “Climate Ctrl. Timer” screen is displayed.

To change the time of day and the day of the

week that the climate control timer turns on or

off, or to turn the climate control timer on or

off, push the

switch.

4. To turn the timer on or off, use the

5. The hour portion of the time is highlighted on

the screen. Push the switch to change

the hour field in increments of one hour. Push

switch to highlight “On” or “Off” and then

push the

switch. If “On” is selected, an

additional screen is displayed that allows you

to change the time or the climate control

timer.

and hold the

hours. Push the

minutes field.

switch to fast forward the

switch to move to the

4-16 Display screen, heater, air conditioner, audio and phone systems

6. Push the

switch to change the minute

7. Push the

off. Push the

switch to set the day to on or

switch and then set the

field in increments of ten minutes. Push and

hold the

minutes. Push the

day of the week setting.

switch to fast forward the

switch to move to the

next day with the same procedure. When all

days of the week have been set, push the

switch.

Display screen, heater, air conditioner, audio and phone systems 4-17

8. The settings confirmation screen will be dis-

played. To confirm and finish setting the cli-

mate control timer, push the

switch.

• When the outside air temperature is low, the air

flow from the foot outlets will be low or may not

operate for up to 150 seconds after turning on

the air conditioner. This is not a malfunction.

Operating tips:

• The automatic climate control is equipped with

sensors as illustrated. The sensors

help maintain a constant temperature. Do not

put anything on or around these sensors.

A

B

and

᭺

• Power consumption of the climate control varies

depending on the outside temperature and the

temperature set for the climate control. Power

consumption increases if the interior tempera-

ture is cooled down too much in summer or if it

is warmed up too much in winter. This reduces

vehicle range.

• Push the AUTO switch to reduce the power

consumption of the climate control system.

• When the AUTO switch is pushed, both the

AUTO and A/C indicator illuminate.

• The AUTO indicator will turn off if the MODE

button, A/C button, fan speed control buttons,

front defroster button, outside air circulation

button or air circulation button is pushed.

• If the charger is connected to the vehicle when

it is in the ready to drive mode and the air

conditioner or heater is on, the power switch

4-18 Display screen, heater, air conditioner, audio and phone systems

automatically changes to the ON position. The

climate control system automatically turns off

the heater or air conditioner and switches to the

air recirculation mode. Place the power switch

in the off position to begin charging. Turn on the

desired climate control function.

Servicing climate control

The climate control system in your NISSAN is

charged with a refrigerant designed with the en-

vironment in mind. This refrigerant will not harm

the earth’s ozone layer. Special charging equip-

ment and lubricant are required when servicing

your NISSAN climate control. Using improper

refrigerants or lubricants will cause severe dam-

age to your climate control system. See “Recom-

mended fluids/lubricants and capacities” in the

“Technical and consumer information”section for

climate control system refrigerant and lubricant

recommendations.

• The remote climate control or climate control

timer may fog up windows depending on the set

temperature or outside temperature.

• When turning on the seat heater switch prior to

operating the remote climate control or climate

control timer, the seat heater also will turn on.

The steering wheel heater will turn on automati-

cally when the outside temperature is low.

A NISSAN certified LEAF dealer will be able to

service your environmentally friendly climate con-

trol system.

In-cabin microfilter:

The climate control system is equipped with an

in-cabin microfilter which collects dirt, pollen,

dust, etc. To make sure the air conditioner, heats,

defogs, and ventilates efficiently, replace the filter

regularly. To replace the filter, contact a NISSAN

certified LEAF dealer.

The filter should be replaced if the air flow

decreases significantly or if windows fog

up easily when operating the climate con-

trol system.

Display screen, heater, air conditioner, audio and phone systems 4-19

8. A/C-Heater ON·OFF button

9. AUTO climate control ON button

10. MODE (manual air flow control) button

11. A/C (air conditioner) ON·OFF button

Automatic operation (AUTO)

The AUTO mode may be used year-round as the

system automatically controls constant tempera-

ture, air flow distribution and fan speed.

To turn off the climate control, press the A/C-

Heater ON·OFF button.

The same operating mode (Heater or A/C) that

was active when the system is turned off is active

when system is turned back on.

While operating the climate control in the AUTO

mode, selecting any other climate control button

de-activates the AUTO mode and activates

manual mode.

Cooling and/or dehumidified heating:

The dehumidified heating mode can be used to

keep the windows from fogging. In this mode, the

heat pump compressor is used in A/C mode for

dehumidifying the air instead of heating it. The

PTC heater is also used in conjunction to heat the

air. This mode will increase energy consumption

and therefore reduce range.

4.

5.

6.

(front defroster) button

(fan speed control) button

(rear window defroster) button (See

“Rear window and outside mirror defroster

switch” in the “Instruments and controls”

section.)

AUTOMATIC CLIMATE CONTROL

(MODELS WITH NAVIGATION

SYSTEM)

1. Temperature control button

2. HEAT button

3. Climate Ctrl. Timer indicator

7.

(intake air control) button

4-20 Display screen, heater, air conditioner, audio and phone systems

1. Press the AUTO button. The AUTO indicator

will illuminate.

3. If the A/C indicator light illuminates, press the

A/C button. The A/C indicator light will turn

off.

turn on to defog the windshield. The outside

air circulation mode will be selected to im-

prove the defogging performance.

2. If the A/C indicator light does not illuminate,

press the A/C button. The A/C indicator light

will illuminate.

4. Turn the temperature control dial to set the

desired temperature. The temperature range

is between 60°F (16°C) and 90°F (32°C).

Manual operation

The manual mode can be used to control the

heater and air conditioner to your desired set-

tings.

3. If the HEAT indicator light does not illuminate,

press the HEAT button. The HEAT indicator

light will illuminate.

• Do not set the temperature lower than the

outside air temperature. Doing so may pre-

vent the temperature from being controlled

properly.

To turn off the heater and air conditioner, press

the A/C-Heater ON·OFF button.

4. Turn the temperature control dial to set the

desired temperature. The temperature range

is between 60°F (18°C) and 90°F (32°C).

• If the windows fog up, use dehumidified

heating instead of the A/C off heating.

Fan speed control:

5. To set the automatic control mode, press and

Press “+” of the fan speed control button

to increase the fan speed.

hold the

(intake air control) button. The

Dehumidified defrosting/defogging:

indicator will blink twice and inside/outside

circulation will switch automatically.

1. Press the front defroster

indicator light will illuminate.)

button. (The

Press “−” of the fan speed control button

to increase the fan speed.

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a malfunc-

tion.

2. Turn the temperature control dial to set the

desired temperature.

Press the AUTO button to change the fan speed

to the automatic mode.

• To remove moisture or fog on the front win-

dow quickly, set the temperature to the high

temperature and the fan speed to their maxi-

mum level.

Heating (A/C off):

1. Press the AUTO button. The AUTO indicator

will illuminate.

• After the windshield is cleared, press the

front defroster

cator light will turn off.)

button again. (The indi-

2. Press the HEAT button. The indicator light on

the HEAT button will come on. If the indicator

light on the A/C button remains on, press the

A/C button so that the indicator light turns off.

• When the front defroster

pressed, the air conditioner will automatically

button is

Display screen, heater, air conditioner, audio and phone systems 4-21

Air flow control:

Note

The ventilation mode requires a lower

power consumption, so cruising distance

will increase.

• Odors from inside and outside the vehicle

can build up in the air conditioner unit.

Odor can enter the passenger compart-

ment through the vents.

Press the MODE button to change the air flow

mode.

— Air flows from the center and side

ventilators.

Air recirculation:

• When parking, set the heater and air con-

ditioner controls to turn off air recircula-

tion to allow fresh air into the passenger

compartment. This should help reduce

odors inside the vehicle.

— Air flows from the center and side

ventilators and foot outlets.

Press the air recirculation

button to

change the air circulation mode. When the indi-

cator light illuminates, the flowing air is recircu-

lated inside the vehicle.

— Air flows mainly from the foot

outlets.

— Air flows from the defroster outlets

and foot outlets.

Outside air circulation:

Climate Ctrl. Timer

Press the intake air control

button to

The air conditioner starts to operate at the time of

day and day of the week specified in the settings.

This pre heats or pre cools the vehicle to a set

temperature in the passenger compartment be-

fore driving while the charger is connected to

vehicle. This help reduce power consumption

from the Li-ion battery.

Temperature control:

change the air circulation mode. When the indi-

cator light does not illuminate, the flowing air is

drawn from outside the vehicle.

Press the temperature control

button to set the desired temperature.

,

Automatic air intake control:

The temperature range is between 60°F (18°C)

and 90°F (32°C).

To set the automatic control mode, press and

hold the

(intake air control) button. The

Ventilation:

indicator light will blink twice and the inside/

outside circulation will then be controlled auto-

matically. When in automatic mode, the indicator

light will come on when inside air recirculation is

active.

The Climate Ctrl. Timer operates the air condi-

tioner using power from the charger. Electric

power from the Li-ion battery is not used.

1. Press the AUTO button so that the indicator

light turns off.

2. Press the HEAT button and A/C button if the

indicator lights are on so that both indicator

lights turn off.

The Climate Ctrl. Timer function allows two dif-

ferent timer settings. Each timer charge function

can be set to activate on a different day of the

week.

4-22 Display screen, heater, air conditioner, audio and phone systems

Once the Climate Ctrl. Timer is set, it will com-

plete air conditioning by the time that is set. It is

not necessary to set the Climate Ctrl. Timer ev-

eryday.

WARNING

Even if the Climate Ctrl. Timer is set, the

temperature in the passenger compart-

ment may become high or low if the sys-

tem automatically stops. Do not leave

children or adults who would normally

require the support of others alone in

your vehicle. Pets should not be left

alone either. On hot, sunny days, tem-

peratures in

a

closed vehicle could

How to set Climate Ctrl. Timer:

1. Push the (Zero Emission menu) button.

quickly become high enough to cause

severe or possibly fatal injuries to people

or animals. Also on cold days, tempera-

ture in

a

vehicle could become low

enough to cause severe or possible fatal

injuries to people or animals.

Display screen, heater, air conditioner, audio and phone systems 4-23

6. When the settings are completed, touch

“Save Timer”. The settings confirmation

screen will be displayed.

7. If the settings shown on the screen are cor-

rect, touch “Yes”.

2. Touch “Climate Ctrl. Timer”.

3. Touch “Set Timer 1” or “Set Timer 2”. The

following procedure explains the Timer 1

setting.

4. Enter the departure time.

5. To set the Climate Ctrl. Timer for different

days of the week, touch “Assign Days”. Select

the preferred timer setting for each day of the

week. After setting, touch “OK”. The previous

screen is displayed.

4-24 Display screen, heater, air conditioner, audio and phone systems

• If OFF is selected for a day of the week, the

Climate Ctrl. timer will not operate on that day.

The system will wait until the next charging timer

set to perform charging.

charge connector is connected to a 120V

outlet.

• While the battery is being charged, the Climate

Ctrl. Timer cannot be operated until the Li-ion

battery available charge gauge reached the full

mark. When the battery is not being charged,

the Climate Ctrl. Timer can be operated, even if

the Li-ion battery available charge gauge has

not reached the full mark.

• While the Climate Ctrl. Timer operates, the Cli-

mate Ctrl. Timer indicator and the charging sta-

tus indicator lights flash. If the Climate Ctrl.

Timer is set to activate, the Climate Ctrl. Timer

indicator illuminates.

8. The indicator of “Timer 1” illuminates after the

Climate Ctrl. Timer is set. Use the same pro-

cedure to set the Timer 2 setting.

• If the timer charge function and the Climate Ctrl.

Timer are in operation at the same time due to

an overlap of the timer settings, either function

can be set to be preferentially provided with

electric power. For the details of “Timer Priority”

settings, refer to separate LEAF Navigation

System Owner’s Manual.

• When the climate control is set on first priority,

the Climate Ctrl. Timer works regardless of the

remaining battery energy.

9. Place the power switch to the OFF position,

and then connect the charge connector to the

vehicle.

• If the Climate Ctrl. Timer starts its operation

while the vehicle is being charged, the charging

time will be prolonged.

Operation tips:

• Operating the Climate Ctrl. Timer or remote

climate control in an environment with low tem-

perature may decrease the rate of battery

charge.

• The Climate Ctrl. Timer will only start when the

power switch is in the “OFF” position. Always

turn the power switch to the “OFF”position after

the Climate Ctrl. Timer is set.

• The temperature in the passenger compartment

may not be comfortable if entering the vehicle

too soon before or too long after the scheduled

time of departure.

• The Climate Ctrl. Timer settings cannot be

modified while it is operating. If timer settings

are modified while the Climate Ctrl. Timer is

operating, these changes will be reflected the

next time the Climate Ctrl. Timer operates.

• Touch “Timer 1” or “Timer 2” to turn off the

Climate Ctrl. Timer function. After this operation

has been performed, the indicator turns off and

the Climate Ctrl. Timer function will be turned

off. The start and stop time settings are not

deleted even if the Climate Ctrl. Timer function

is turned off.

• Air conditioning is limited to the capacity of the

electric power when the charge connector is

connected. Therefore, the temperature may not

reach the factory default setting due to limita-

tions in air conditioning performance, if ambient

temperature is excessively high or low, or if the

Display screen, heater, air conditioner, audio and phone systems 4-25

• When charging is set as the first priority, the

Climate Ctrl. Timer does not start until 10 seg-

ments of the Li-ion battery available charge

gauge are illuminated.

WINGS Data Center website using a cellular

phone or a personal computer.

•

Even if the remote climate control is

set, the temperature in the passenger

room may become high if the system

automatically stops. Do not leave chil-

dren or adults who would normally re-

quire the support of others alone in

your vehicle. Pets should not be left

alone either. On hot, sunny days, tem-

peratures in a closed vehicle could

quickly become high enough to cause

severe or possibly fatal injuries to

people or animals.

When operation is started, or at the set start time,

the NISSAN CARWINGS Data Center accesses

the vehicle. When the vehicle receives a com-

mand for remote operation, the climate control

immediately turns ON and operates for the speci-

fied period of time. Confirmation of the ON/OFF

of the climate control operation can be checked

by accessing the website or by e-mail.

• When the climate control is set as the first

priority, the climate control system will be turned

on as scheduled by the Climate Ctrl. Timer

regardless of the remaining battery energy.

• Even when the climate control is set as the first

priority, the climate control system will be turned

off when the climate control spends more elec-

tric than the charging Li-ion battery.

Establishing the CARWINGS™ service is neces-

sary before using the service. See LEAF Naviga-

tion System Owner’s Manual.

NOTE:

• The Li-ion battery may not charge or may even

become discharged if the Climate Ctrl. Timer or

remote climate control is used in low ambient

temperatures.

• To check the Li-ion battery charging status

using an internet enabled smart phone or

personal computer.

WARNING

•

Radio waves could adversely affect

electric medical equipment. For more

information, contact your electric

medical equipment manufacturer for

the possible effect on pacemakers be-

fore using the remote climate control.

– The vehicle must be located in a cellu-

lar phone coverage area.

– The cellular phone must be located in

an area with cellular phone coverage.

– The computer must be connected to

the internet.

Remote climate control

This vehicle incorporates a communication de-

vice that is called a TCU (Telematics Communi-

cation Unit). The communication connection be-

tween this unit and NISSAN CARWINGS Data

Center allows for various remote function ser-

vices.

• Some cellular phones are not compatible

with this system and cannot be used to

check the Li-ion battery charging status.

Confirm this beforehand.

Even when away from the vehicle, climate control

can be started by accessing the NISSAN CAR-

4-26 Display screen, heater, air conditioner, audio and phone systems

to performance of the air conditioning being

limited, if the outside temperature is excessively

high or low, or if the charge connector is con-

nected to a 120V outlet.

Operating tips:

• When the charge connector is connected, the

climate control operates using electric power.

When the charge connector is disconnected

from the vehicle, the climate control operates

using vehicle battery electric power.

• If the power switch is in the ON position or the

charge connector is disconnected, while the

remote climate control is being operated, re-

mote climate control operation is automatically

stopped and an e-mail is sent.

• The climate control can be operated for a maxi-

mum of 2 hours when the charge connector is

connected to the vehicle, or a maximum of 15

minutes when the charge connector is

disconnected.

• If remote climate control operation is started

while the vehicle is in normal charge mode, the

climate control operates in climate control pri-

ority mode and charging is continued.

• The remote climate control will only start to

operate when the power switch is in the OFF

position. Be sure to check that the power switch

is in the OFF position.

• If remote climate control operation is started

and charging is stopped while the vehicle is in

quick charge mode, climate control operation is

also stopped.

• Remote climate control operation is not avail-

able when the vehicle is in an area of cellular

communication range.

• If the quick charge connector is connected and

charging is not performed, remote climate con-

trol operation starts using the battery electric

power of the vehicle.

• Communication becomes unavailable when the

vehicle is not used for two weeks or more.

When the power switch is placed in the ON

position, communication with the NISSAN

CARWINGS Data Center can be restored.

Temperature settings

This procedure sets the temperature of Climate

Ctrl. timer and remote climate control.

• Air conditioning is limited to the capacity of the

electric power when the charge connector is

connected to the vehicle. Therefore, the tem-

perature may not reach a comfortable level due

2. Touch “Timer/Remote – Set Climate Temp”.

3. Set the temperature and the touch “OK”.

1. Push the Zero Emission menu button. Touch

“SETTING”.

Display screen, heater, air conditioner, audio and phone systems 4-27

Display screen, heater, air conditioner, audio and phone systems -> Climate control system for Your Nissan Leaf 4 Door First Generation (2010-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals