• It may take some time until the RearView Moni-
tor is displayed after the shift lever has been
shifted to R (Reverse). Objects may be dis-
torted momentarily until the RearView Monitor
screen is displayed completely. When the shift
lever is returned to a position other than R
(Reverse), it may take some time until the
screen changes. Objects on the screen may be
distorted until they are completely displayed.
Note
Do not adjust the Brightness or Contrast of
the RearView monitor while the vehicle is
moving.
When the headlights are in the ON position, the
display screen will automatically default to the
night screen (dark).
Day/Night button
• When the temperature is extremely high or low,
the screen may not clearly display objects. This
is not a malfunction.
To turn OFF the display screen, push the
button and hold for two seconds. Push the
button again to turn the display screen ON.
REARVIEW MONITOR BRIGHTNESS
CONTROL
• When strong light directly enters the camera,
objects may not be displayed clearly.
Push the
button to quickly adjust the bright-
ness from any screen except when using the
RearView monitor and/or camera. See “Rear-
View monitor”in this section for more information.
• Vertical lines may be seen in objects on the
screen. This is due to strong reflected light from
the bumper. This is not a malfunction.
1. To adjust the brightness of the RearView
monitor, fully depress the foot brake pedal and
move the shift lever to the R (Reverse) posi-
tion. See “Shifting” in the “Starting and driving”
section for more information.
Note
• The screen may flicker under fluorescent light.
This is not a malfunction.
When the headlights are in the ON po-
sition, the display screen will automati-
cally default to the night screen (dark).
• The colors of objects on the RearView Monitor
may differ somewhat from those of the actual
object.
2. Once the vehicle is in the R (Reverse) posi-
tion, with the foot brake pedal fully depressed,
press the Day/Night button on the lower left
hand side of the display screen to adjust the
Brightness of the RearView monitor. See “Day/
Night button” in this section for more informa-
tion.
OPERATING TIPS
• When the contrast of objects is low at night,
pressing the ENTER/SETTING button may not
change the brightness.
• When the shift lever is shifted to R (Reverse),
the monitor screen automatically changes to the
RearView Monitor mode. However, the radio
can be heard.
• Objects on the monitor may not be clear in a
dark place or at night.
Display screen, heater, air conditioner, audio and phone systems 4-7
English 
