Get Display screen, heater, air conditioner, audio and phone systems -> FM-AM-SAT radio with compact disc (CD) player (models without Navigation System) Guide for Nissan Leaf 4 Door First Generation (2010-2017)

• Operating procedure of the Bluetooth® audio

will vary depending on the devices. Make sure

how to operate your audio device before using it

with this system.

• The Bluetooth® audio may be stopped under

the following conditions:

– Receiving a call on the Hands-Free Phone

System.

– Checking the connection to the hands-free

phone.

• Do not place the Bluetooth® audio device in an

area surrounded by metal or far away from the

in-vehicle Bluetooth® module to prevent tone

quality degradation and wireless connection

disruption.

• While an audio device is connected through the

Bluetooth® wireless connection, the battery

power of the device may discharge quicker than

usual.

• This system supports the Bluetooth® Audio

Distribution Profile (A2DP, AVRCP).

3. XM band select button

4. DISP (display) button

5. Color display

6. iPod MENU button

7. Radio CAT (category)/REW (rewind) button

for SEEK/CAT

FM-AM-SAT RADIO WITH

COMPACT DISC (CD) PLAYER

(MODELS WITHOUT NAVIGATION

SYSTEM)

BLUETOOTH® is a trademark

owned by Bluetooth SIG, Inc. and licensed to

Visteon.

1. FM·AM band select button

2. CD EJECT button

8. Radio SCAN tuning button

4-36 Display screen, heater, air conditioner, audio and phone systems

9. Radio CAT (category)/FF (fast forward) but-

ton for SEEK/CAT

dated in the radio. Place the power switch from

LOCK to ACC to update the channel list.

right speakers. Fade adjusts the sound be-

tween the front and rear speakers.

10. BACK button

11. CD·AUX button

Select the “Bass”, “Treble”, “Balance” or “Fade”

using the TUNE·SCROLL control knob and then

press the ENTER/SETTING button. Turn the

TUNE·SCROLL control knob to adjust the Bass,

Treble, Balance and Fade of the screen to the

preferred level.

Audio main operation

Head unit:

12. PWR (power) button/VOL (volume) control

knob

13. RPT (repeat) play button

14. RDM (random) play button

15. Radio station preset select buttons

16. AUX IN jack

The auto loudness circuit enhances the low and

high frequency ranges automatically in both radio

reception and CD playback.

PWR (Power)/VOL (Volume) control:

• Speed Sens Vol.

To change the Speed Sensitive Volume

(Speed Sens Vol.) level from off to 5, turn the

TUNE·SCROLL control knob.

17. TUNE·SCROLL control knob

18. ENTER/SETTING button

Place the power switch in the ACC or ON posi-

tion, and then press the PWR button while the

system is off to turn on the last audio source,

which was playing immediately before the system

was turned off. While the system is on, pressing

the PWR button turns the system off.

For all operation precautions, see “Audio opera-

tion precautions” in this section.

• AUX Vol.

Controls the volume level of incoming sound

when an auxiliary device is connected to the

system. To change the AUX Vol. level from +1

to +3, turn the TUNE·SCROLL control knob.

• No satellite radio reception is available when the

SAT band option is selected unless the optional

satellite receiver and antenna are installed, and

there is an active SiriusXM® Satellite Radio

subscription.

Turn the VOL control knob to adjust the volume.

ENTER/SETTING button:

• Brightness and Contrast

The settings screen will appear when pressing

the ENTER/SETTING button.

Adjust the brightness and contrast of the

screen.

• The satellite radio mode requires an active Siri-

usXM® Satellite Radio subscription. The satel-

lite radio is not available in Alaska, Hawaii and

Guam.

The following items are available in the settings

screen.

Select the “Brightness” or “Contrast” using the

TUNE·SCROLL control knob and then press the

• Bass, Treble, Balance and Fade

• It may take some time to receive the activation

signal after subscribing the SiriusXM® Satellite

Radio. After receiving the activation signal, an

available channel list will be automatically up-

ENTER/SETTING

button.

Turn

the

Controls the sound of the audio system. Bal-

ance adjusts the sound between the left and

TUNE·SCROLL control knob to adjust the bright-

ness and contrast of the screen to the preferred

level.

Display screen, heater, air conditioner, audio and phone systems 4-37

6) Press the ENTER/SETTING button

• On-Screen Clock

DISP button:

᭺

Display of the screen can be canceled by press-

ing the DISP button. You can then listen to music

that is being played back. If you want to display

the screen again, either press the DISP button

once more or press the FM·AM, XM Satellite

Radio or CD·AUX button.

When this item is turned on, a clock is always

displayed in the upper right corner of the

screen.

Select the “On-Screen Clock” using the

TUNE·SCROLL control knob and then press the

ENTER/SETTING button. You can toggle be-

tween ON and OFF using the TUNE·SCROLL

control knob.

CD·AUX button:

Pressing the CD·AUX button will switch the dis-

plays as follows:

• RDS Display

CD→iPod®/USB→AUX→CD

When this has been set to ON, RDS (radio

data system) information will be shown on the

display. Select RDS display and then press

the ENTER/SETTING button. You can toggle

between ON and OFF using the

TUNE·SCROLL control knob.

BACK button:

• Clock Adjust

When the BACK button is pressed, it returns to

the previous display.

Adjust the clock according to the following

procedure:

1) Press the ENTER/SETTING button

᭺

FM-AM-SAT radio operation

and turn the TURN/SCROLL knob

un-

᭺

FM/AM band select:

• iPod® Menu language

til “Setting Clock” and “Clock Adjust” ap-

Pressing the radio band select button will change

the band as follows:

The iPod® menu language can be set to Eng-

lish, French or Spanish.

pear on the display.

2) Press the ENTER/SETTING button

select “Clock Adjust.”

᭺

AM→FM1→FM2→AM

SiriusXM® (SAT) band select:

Select iPod® menu language and then press the

3) Turn the TUNE·SCROLL control knob

to adjust the hour.

ENTER/SETTING

button.

Use

the

᭺

TUNE·SCROLL control knob to select the pre-

ferred language.

Pressing the XM band select button will change

the band as follows:

4) Press the ENTER/SETTING button

᭺

5) Turn the TUNE·SCROLL control knob

to adjust the minute.

᭺

XM1→XM2→XM3→XM1

4-38 Display screen, heater, air conditioner, audio and phone systems

When the XM band select button is pressed

while the power switch is in the ACC or ON

position, the radio will come on at the channel last

played.

SEEK tuning/CAT (category):

• For AM and FM radio

Press the SEEK button

from low to high or high to low frequencies and

to stop at the next broadcasting station.

(6 each for XM1, XM2 and XM3) and six stations

can be set for the AM band.

to tune

1. Choose the radio band using the radio band

select button.

The last channel played will also come on when

the PWR button is pressed to ON.

2. Tune to the desired station/channel using the

• For SiriusXM® Satellite Radio

SEEK·CAT,

TUNE·SCROLL control knob

3. Press and hold the desired station preset

SCAN

button

the

The satellite radio is not available in Alaska, Ha-

waii and Guam.

Press the SEEK button

to tune

to the first channel of the next or previous

category.

button

᭺ ᭺

If another audio source is playing when the radio

select band button is turned to ON, the audio

source will automatically be turned off and the

last radio channel played will come on.

4. The channel indicator will then come on and

the sound will resume. Memorizing is now

complete.

SCAN tuning:

Press the radio SCAN tuning button to tune from

low to high frequencies and stop at each broad-

casting station/channel for 5 seconds. “SCAN”is

shown on the display. Pressing the button again

during this 5 second period will stop SCAN

tuning and the radio will remain tuned to that

station/channel.

5. Other buttons can be set in the same manner.

When the stereo broadcast signal is weak, the

radio automatically changes from stereo to mon-

aural reception.

If the battery cable is disconnected, or if the fuse

opens, the radio memory will be erased. In that

case, reset the desired stations/channels.

TUNE (Tuning):

Compact disc (CD) player operation

• For AM and FM radio

If the radio SCAN tuning button is not pressed

within 5 seconds, SCAN tuning moves to the next

station/channel.

Turn the radio TUNE/SCROLL control knob

for manual tuning.

Place the power switch in the ACC or ON posi-

tion and insert the Compact Disc (CD) into the

slot with the label side facing up. The CD will be

guided automatically into the slot and start play-

ing.

• For SiriusXM® Satellite Radio

᭺ ᭺

Station memory operations:

Turn the radio TUNE/SCROLL control knob to

seek channels from all of the categories when

any category is not selected.

Twelve stations/channels can be set for the FM

band (6 each for FM1 and FM2). Eighteen chan-

nels can be set for the SiriusXM® Satellite radio

After loading the CD, the number of tracks on the

CD and the play time will appear on the display.

Display screen, heater, air conditioner, audio and phone systems 4-39

If the radio is already operating, it will automati-

cally turn off and the CD will play.

Repeat (RPT):

If the CD comes out and is not removed, it

will be pulled back into the slot to protect it.

When the RPT play button is pressed while the

CD is played, the play pattern can be changed as

follows:

If the system has been turned off while the CD

was playing, pressing the PWR button will start

the CD.

AUX IN jack:

The AUX IN jack is located on the audio unit. The

AUX IN audio jack accepts any standard analog

audio input such as from a portable cassette

tape/CD player, MP3 player or laptop computer.

(CD)

Do not use 3.1 in (8 cm) discs.

Normal↔1 Track Repeat

(CD with compressed audio files)

CD·AUX button:

When the CD·AUX button is pressed with the

system off and the CD loaded, the system will

turn on and the CD will start to play.

Normal→1 Folder Repeat→1 Track Repeat-

When the CD•AUX button is pressed with no

device plugged into the jack, the audio system

does not change to the AUX mode.

→Normal

Random (RDM):

With the CD·AUX button is pressed with the CD

loaded and the radio playing, the radio will auto-

matically be turned off and the CD will start to

play.

When the RDM play button is pressed while a

CD is being played, the play pattern can be

changed as follows:

NISSAN strongly recommends using a stereo

mini plug cable when connecting your music

device to the audio system. Music may not play

properly when a monaural cable is used.

(CD)

Next/Previous Track and Fast

Forward/Rewind:

Normal↔1 Disc Random

(CD with compressed audio files)

When the FF or REW button is pressed for more

than 1.5 seconds while the CD is being played,

the CD will play while fast forwarding or rewind-

ing. When the button is released, the CD will

return to normal play speed.

Normal→1 Disc Random→1 Folder Random-

→Normal

CD EJECT:

When the CD EJECT button is pressed with a

compact disc loaded, the CD will be ejected.

When the FF or REW button is pressed for less

than 1.5 seconds while the CD is being played,

the next track or the beginning of the current track

on the CD will be played.

When this button is pressed while the CD is

being played, the CD will be ejected.

4-40 Display screen, heater, air conditioner, audio and phone systems

Display screen, heater, air conditioner, audio and phone systems -> FM-AM-SAT radio with compact disc (CD) player (models without Navigation System) for Your Nissan Leaf 4 Door First Generation (2010-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals