FOG LIGHT SWITCH (IF SO
EQUIPPED)
Daytime running light system (for
Canada)
The daytime running lights automatically illumi-
nate when the power switch is in the READY to
drive position with the parking brake released.
The daytime running lights operate with the head-
light switch in the OFF position. Turn headlight
switch to the
position for full illumination
when driving at night.
If the parking brake is applied before the power
switch is in the READY to drive position, daytime
running lights do not operate. The daytime run-
ning lights illuminate once the parking brake is
released. The daytime running lights will remain
on until the power switch is pushed to the OFF
position.
To turn the fog lights on, turn the headlight switch
TURN SIGNAL SWITCH
to the
position, then turn the switch to the
1
Turn signal
᭺
position. To turn them off, turn the switch to
Move the lever up or down to signal the turning
direction. When the turn is completed, the turn
signals cancel automatically.
the OFF position.
The headlights must be on for the fog lights to
operate.
2
᭺
Lane change signal
To indicate a lane change, move the lever up or
down to the point where lights begin flashing.
The turn signal will flash three times automati-
cally.
2-44 Instruments and controls
English 
