Resetting to slower speed:
CRUISE CONTROL OPERATIONS
Cancelling cruising speed
Use any one of the following methods to cancel
the set speed.
Use any one of the following methods to reset
to a slower speed.
The cruise control allows driving at speeds
above 40 km/h (25 MPH) (except for Europe) or
30 km/h (20 MPH) (for Europe) without keeping
your foot on the accelerator pedal.
.
.
.
Lightly tap the foot brake pedal. When the
vehicle reaches the desired speed, push
and release the COAST/SET or SET/-
switch.
.
.
.
Push the CANCEL switch.
Tap the foot brake pedal.
For gasoline engine models, the cruise control
will automatically be canceled if the vehicle
slows down more than approximately 13 km/h
(8 MPH) below the set speed.
Push the cruise control Cruise ON/OFF
switch. The CRUISE indicator will turn off.
Push and hold the COAST/SET or SET/-
switch. When the vehicle reaches the de-
sired speed, release the COAST/SET or
SET/- switch.
For diesel engine models, the cruise control will
automatically be canceled if the vehicle speed
slows to less than approximately 35 km/h (22
MPH).
Quickly push and release the COAST/SET or
SET/- switch. This will reduce the vehicle
speed by about 1 km/h or 1 MPH.
Moving the shift lever to the “N” (Neutral)
position will cancel the cruise control.
Resetting to faster speed:
Use any one of the following methods to reset
to a faster speed.
Turning on cruise control
Push the Cruise ON/OFF switch. The CRUISE
indicator in the vehicle information display will
appear.
.
.
.
Depress the accelerator pedal. When the
vehicle reaches the desired speed, push
and release the COAST/SET or SET/-
switch.
Setting cruising speed
1. Accelerate to the desired speed.
Push and hold the ACCELERATE/RESUME
or RES/+ switch. When the vehicle reaches
the desired speed, release the ACCELER-
ATE/RESUME or RES/+ switch.
2. Push the COAST/SET or SET/- switch and
release it.
3. Take your foot off the accelerator pedal.
The vehicle will maintain the set speed.
Quickly push and release the ACCELERATE/
RESUME or RES/+ switch. This will increase
the vehicle speed by about 1 km/h or 1 MPH.
Passing another vehicle:
Resuming at preset speed:
Depress the accelerator pedal to accelerate.
After releasing the accelerator pedal, the vehi-
cle will return to the previously set speed.
Push and release the ACCELERATE/RESUME or
RES/+ switch.
The vehicle will resume the last set cruising
speed when the vehicle speed is over 40 km/h
(25 MPH) (except for Europe) or 30 km/h (20
MPH) (for Europe).
The vehicle may not maintain the set speed
when going up or down steep hills. In such
cases, drive without the cruise control.
Starting and driving 5-63
English 
